Thanks a lot! I was scratching my head for hours to understand why my board would not work
@Youngduck934 жыл бұрын
Thank you so much for the quality content! :) p.s. (for people using linux and need the CP210x driver), the driver is already maintained as part of the linux kernel. (ex. /lib/modules/4.15.0-108-generic/kernel/drivers/usb/serial/cp210x.ko)
@Josh-vu4sb4 жыл бұрын
So my question is how do you install the driver?
@AntonySimkin14 күн бұрын
@@Josh-vu4sb it is installed by default let's say
@Revenge404Notfound11 ай бұрын
Mine doesn't have a chip with numbers like that.
@cezn Жыл бұрын
bro didnt even tell the process install
@antipro65377 ай бұрын
I know that’s why I clicked, too!
@YellowstoneBrew Жыл бұрын
Fantastic! Thanks much for this pretty straight forward way to allow communication with my HiLetgo ESP-32S. I looked high and low for a solution. Thanks!
@joelbaena26263 жыл бұрын
Thank you so much. I didn't know how to fix the problem.
@JeanCantalini11 ай бұрын
How do I get com port for ESP32 espressif for windows 11? I tried CP210X universal Windows Driver V11.3.0 6/24/2023 I use Arduino IDE 2.2.1 with 115200 baud, but it didn’t work. The following works fine, Arduino UNO, UNO R4 WiFi and UNO R2 WiFi Please help.
@jorgefossati37014 жыл бұрын
Before you can program the ESP32, you need to install a driver for the USB-to-UART chip. Depending on your board that might be the CH340 or CP210x chip.
@electrophotomechanics87972 жыл бұрын
Thanks, this helped me a lot!
@mrobarton71922 жыл бұрын
Linux Buster was able to work and recognize both of these chips without any need to install any drivers. However the issue I'm having is with the latest replacement chip CH9102F... Do you have any information to share with regard to this chip? Thanks!
@fahimanwar943 жыл бұрын
I installed both the CH340 and CP210X drivers and it's still not working. Any ideas on what might be the problem? Tried different USB cables as well
@richmiller540 Жыл бұрын
Might be CH1902
@glennimmanuel9338 Жыл бұрын
@@richmiller540 but how to download ch9102 driver?
@glennimmanuel9338 Жыл бұрын
i installed both the ch9102 and ch340 drivers but its still not working 😢
@mystery_1101 Жыл бұрын
@@glennimmanuel9338must be a faulty board.
@andromaxdua2743 жыл бұрын
any idea for esp32 with ch9102x driver? cant find the correct driver
@vishalbhalla470 Жыл бұрын
have you found the driver?
@ZamanDriver Жыл бұрын
Same problem 😢😢
@pokuanchoo4180 Жыл бұрын
Good info thanks 👍👍
@MaximusJohal3 жыл бұрын
I have windows 10 can't seem to recognise the chip
@samm92811 ай бұрын
My boards don't have UART .. ESP32-C3 SuperMini and ESP32-S3 Zero. I tried to refresh Flash Bootloader and now the board is not recognized when connected to USB
@davedoyan41932 жыл бұрын
hello, I cant access the website since it says "access denied" on me everytime I try and download the universal server. Is there any way to download it?
@manfredbogner97995 ай бұрын
Sehr gut
@Good-Enuff-Garage3 жыл бұрын
great video too bad I can't install the ARCELI WeMos D1 R2 WiFi ESP8266 driver on my Windows 10 no matter what I do
@dinethjayawardena27393 жыл бұрын
Thank you very much
@michielallemeersch861 Жыл бұрын
how do you install the driver on win10? there's no exe file, only a inf file but when i right click and click install, something pops up, says operation completed, but nothing happens
@naumanahmed4174 Жыл бұрын
My ESP32 uses CH9102X chipset and I cannot find any drivers for it , please someone help me with this
@DMXHindiGaming11 ай бұрын
Sam's problem here , did you find the solution??
@f.k.61513 жыл бұрын
Thanks for the video, and I know you mean well, but I am not able to open a com port on either mac osx or windows using these drivers, and I have tried both of them on bot operating systems. This, of course is a big problem that nobody is covering - really - everyone that succeeds may be lucky.
@mugut4483 Жыл бұрын
Even for me Mera gadi 55a::
@manuquero73769 ай бұрын
hello, have you been able to solve it?
@nickgennady3 жыл бұрын
I just bought 2 of them. Bluetooth on board saves room because I need very small enclosures.
@paulmarchant59204 жыл бұрын
Hi thanks for your video but I can not get my ESP32 to connect to any of my pc's or laptop's! I'm running on the latest Windows 10 and Arduino IDE and have added ESP32 to Aruino IDE but port# remains blank. My ESP32 does not have any chips with CH340 or CP210x numbers. I have installed the Silicon Labs Windows 10 universal driver. Any help would be most grateful
@lou27373 жыл бұрын
Did you find a fix?
@lou27373 жыл бұрын
@@stainlessmacbeth6348 I fixed the issue... You just need to install the drivers. It's a bit of trial and error on which one will work but one of them did... I think it was the cp210x for me
@web-code-maker2 жыл бұрын
tx for links
@MsGauthami Жыл бұрын
HI am having esp32 wroom 32UE wifi module .I want driver for that in linux. Could you please suggest some path?
@_nelsiton Жыл бұрын
help, the page didnt show any software
@mbennett2663 Жыл бұрын
man this is frustrating i have 4 boards and i cannot figure out how to flash them at all. i have the file opened it ran it and the wizrard said it cldnt find a drive for it i had it plugged in?
@armandocristanchovega83443 жыл бұрын
Thank you so much.
@danmeuse4962 жыл бұрын
which ones do i install?
@raptvyzor38873 жыл бұрын
its shows access denied when i click the option to download it :(
@muhammedsameel539010 ай бұрын
thANKU BROO
@jaytoy92965 ай бұрын
Can you please share driver link of esp32s3 sense
@studywithmenehal1935 Жыл бұрын
My laptop device manager doesn’t show port option..
@SortofGoodwithTech Жыл бұрын
At the top click view then show hidden items
@codeklaudia96962 жыл бұрын
Could someone please tell what are the drivers for Windows 10 ? Thank you very much
@violin-y-piano-capilla-golgota Жыл бұрын
link no available
@ElPollutosan2 жыл бұрын
thanks!
@enriqueatala25673 жыл бұрын
Thank you very much for the video, very useful! A query which board should I choose in the Arduino, I can't get it to compile because it gives me an error on the board. Greetings----Muchas gracias por el video, muy útil! Una consulta que placa debo elegir en el Arduino, no logro que compile por que me da error en placa. Saludos
@maxmoon17122 жыл бұрын
como lo solucionaste?
@enriqueatala25672 жыл бұрын
@@maxmoon1712 Elegi en Placa> ESP 32 Dev Module. éxitos
@enriqueatala25672 жыл бұрын
@@maxmoon1712 atencion que tengo MAC y Arduino Ide 1.18 con High Sierra, si intentas en Catalina debes descargar la version 2. de IDE Arduino, ya que catalina no ejecuta aplicaciones de 32 bits como es el IDe de arduino 1.18.
@maxmoon17122 жыл бұрын
@@enriqueatala2567 gracias, al final el problema era el cable, se me fundió el nodemcu
@enriqueatala25672 жыл бұрын
@@maxmoon1712 No digas, hay que ver entonces y confrirmar que estén llegando los 5 volts y no mas de ello, por lo que que he leido son muy sensibles al voltaje.
@richmiller540 Жыл бұрын
Mine has ch1902
@infinitie_beaz Жыл бұрын
idk there is non of these numbers
@anis-pras4 жыл бұрын
can anyone help me out with Seeduino V4.2. My mac (catalina) isn't detecting serial port, neither showing in Arduino IDE. I tried every driver out there. Nothing seems to work. Even changed the cable.
@_frajota4 жыл бұрын
I'm also experiencing the same problem
4 жыл бұрын
@@_frajota Me too using Sierra... OSX 10.12.3
@rodrigopaz2662 Жыл бұрын
Did you fix your problem? I'm dealing with the same thing :(