Install Slipper Clutch in NS 200 🔥 | RS200, NS 200, Duke 200 Clutch Modification |

[@Dashport-ih7ww]

This is the channel that nobody saw it coming but we needed the most. Thanks for the video !

[@damaihati7151]

Friendly reminder, before installing a new clutch friction plate, first soak it in oil so that when you start the engine, the clutch friction plate doesn't burn.

[@Hunter.1999]

It's pre-lubed dude

[@damaihati7151]

Please read the service manual. Written notice: If new dry friction plates and steel plates are installed, apply engine oil to the surfaces of each plate to avoid clutch plate seizure.

[@sivakondiparthy2074]

First a fall it's slipper you don't need to lube it's pre lubed

[@Hunter.1999]

I'm a service manager @ Honda two wheelers 😅

[@pranavjs]

​@@Hunter.1999sure that for every manufacturer,that the plates will be pre lubed? Or is it just for honda?

[@boscomendes9593]

I was searching this modification video over 2 years now. Thank you

[@damaihati7151]

Where do you come from sir?

[@ARKIONX]

I’m from Bangalore

[@lyricshub8421]

I'm also searching for from 2 years

[@KurhaediHartoko]

@@lyricshub8421 So you intend to install this slipper clutch? Or have you installed it? Waiting for a review from you

[@TusharPatil-dl4gt]

​@@ARKIONX bro this fit on n160 2022 model

[@sandeepchoudhury9418]

Really, I appreciate your work, not like other so called riders who don't even give basic understanding of all these things. Good work bro , keep making these type of content 👍😊

[@chainpurpublic]

Most valuable video for pulsar lovers ❤❤

[@vasanromeo4307]

Music is too loud and voice is low a little to hear. Anyhow amazingly helpful video thank you brother

[@hash2shyam]

Great video man! nicely explained and straight to the point. would be great if the music is little mellower. also is it fine if you rev-match when you have a slipper clutch? whats the difference between rev-matching and engine breaking? isn't both effectively same?

[@damaihati7151]

By definition, a slipper clutch allows the clutch to slip a predetermined amount when gearing down. The main purpose of this is to allow the next gear down to engage without the sudden introduction of engine braking that you’d normally get at high revs. By slipping, the slipper clutch gives a more progressive action to the gear down process making changing down gears smoother. Rev matching, also known as throttle blipping) was specifically designed to do a similar process before slipper clutches were introduced. For the most part, and especially for road riding, rev matching is no longer required at all. However, for racing and due to the continuous peak revs used there, rev matching can still be a benefit. Although this is not done manually anymore - an electronic component call the auto-blipper performs this function so that the rider no longer needs to reduce pressure on the throttle handle (potentially losing front braking efficiency) to blip the throttle during down changes. The rider simply starts pushing/pulling (depending on gear shift mode) on the gear lever, the electronics sense the change in gear coming and blips the throttle for the rider. So for road riding, it is not required. For racing, it depends on whether you have an auto-blipper or not.

[@hash2shyam]

@@damaihati7151 thank you for the prompt response . i own an adventure 390 and it has slipper clutch. Whenever i want to downshift, I blip throttle a bit and downshift simultaneously leaving the clutch lever (which is rev matching i guess). I do this to reduce the speed of the bike as well instead of braking. This make the downshift smoother and shifting gear almost inaudible. So just want to know this method downshifting is not bad for the engine while it has slipper clutch? Thanks

[@IridiumMotorola]

U increase your front suspension height true😊

[@LouiesFishing]

This is very informative brother, i have been using ns bike since I started motorcycling. I hope i can find this in our country.

[@samarthpawar9577]

Can i install it in my rs200 ? And how was your experience while using slipper clutch? Whether it is good or bad?

[@helmetboy-zo8fn]

hi bro first time I'm watching your videos I'm so impressed make doing more videos bro ,when i have some doubts i will message to you please reply bro thank you

[@shreyadeshpande6210]

man perfect presentation, kudos

[@mahinm6475]

Hi bro.. Did you feel any below difference after installing the slipper clutch? 1- slickness in gear engagement? 2- delay in gear engagement? 3- throttling delay after rolling movement to throttling? 4- Loose clutch cables after installation?

[@SameerShaikh-lw9xh]

Hey there can u please make a video on carburetor tuning in ns 200 old models?

[@madhusudhanv8850]

Please make an video on abs installation for non abs bs4 ns200 bike

[@Neshway]

As an owner of NS200 I really enjoy watching your videos, This video definitely helped me and I'm planning to install a slipper clutch in my vehicle 💯🔥 Keeps mods and builds videos coming 🫣

[@kathiravan6219]

if possible can you give me long time riview for slipper cluch in rs 200 is there any problem ocure for engine

[@Bigdave123]

You didn't mentioned the after problem of clutch adjustment

[@motomaniac5163]

Will this modification make sense on my N160?

[@sandeepchoudhury9418]

Could you share the clutch nut opener buying link for ns200. I saw many crown socket opener in amazon but confused which one should fit for ns200.

[@itszubaidulislamofficial590]

Can I use n160 slipper clutch to ns160 bs4 ? Plz reply bro I'm from Bangladesh ❤️🇧🇩

[@anrajkumar5917]

Can i fit in 200ns bs3

[@Abhinash1993]

Hi does your ns200 after using n250 clutch assembly has any issue till date ?

[@sivakondiparthy2074]

Perfect content man i got recommendation from youtube watched all your videos from morning bottom of my heart your are under rated i useally watch spourtztourer from now im waiting for your videos every week does this slipper clutch fits for ns 200 2021 model thanks in advance.😊

[@ARKIONX]

Thank you so much. I’m glad that you liked my content. Speaking of slipper clutch, yes it fits all NS & RS models which were launched from 2017. Only BS3 models might have some problems.

[@sivakondiparthy2074]

@@ARKIONX thanks for replying and my suggestion is that try make a video on every weekend i support you man.

[@Junetktm]

Ktm duke 200 and ns 200 share same clutch means i can install slippers clutch in duke 200 happy ❤❤❤❤

[@harshusvlogs24]

Yes you can 👍🏻

[@johnck8707]

Ya its same but its costly 😅

[@kankit230]

Yes you can have been usin this for over 6 months

[@damaihati7151]

​@@kankit230Does the clutch handle feel lighter, sir?

[@kankit230]

@@damaihati7151 yea noticable lightness

[@dhanushgamingytdhanushgami432]

Service center members will our bike slipper clutch ?

[@ksr21vlogs]

Can we use N250 clutch housing as well?

[@KunchiKiran]

Any performance drop?

[@rajeev.212]

Can we install n250 slipper clutch on n160 and why does n160 has 3 springs does it have slipper clutch pre installed ??

[@deepankar0777]

Please also make a long term review of this modifications in your clutch. Subscribed 👍

[@ARKIONX]

Sure 👌🏻

[@adithyamohan5621]

man you should start your own accessories shop, if you have this level of skills.

[@gauteyfrombhw]

Sir, can Xpulse 200 4v can have a slipper clutch? Can you do some research and tell me?😢

[@MOMOGOD716]

Have a question...as an owner of bs4 rs 200 ...it has 6 feet gearbox but n250 and f250 has 5 feet units so how can this go as a direct fit ....answer needed admin

[@jonyjonyvlogs]

Use latest ns200 clutch

[@pulsarstunt180]

Ns 200 bs7 obd 2024 is compatible this slipper clutch

[@Rohith07]

Hi bro I have one doubt n250 has 5 gears and the n250 clutch comes with only 4 plates and 1 friction plate by this plates we can run ns 200 without any problem

[@gnrhkyfj]

yes bro also my concern on nmber of plates are less in n250

[@pragatish7601]

Hiii, can you provide a purchase link to the tool you used to remove the clutch lock nut

[@mohammed46abrar]

Bro how was the gear shifting & ridding comfort is there any advantages like milega, pickup..?

[@damaihati7151]

Engine braking is not powerfull as before

[@abhishekshrivastav3825]

​@@damaihati7151Thanks for this very very important information brother. I almost made up my mind to install this but now it looks like gaining something at the cost of losing a great feature. Engine braking in Duke 200 is very strong and it very much required in order to handle the type of acceleration Duke provides. Can't imagine how would I slow down my Duke with less engine braking than before. Can you please provide a lump sump figure like how much in percentage the intensity of engine braking is decreased after installing slipper clutch. It would be of great help before taking this decision as once it is done it would be a new area to learn how to rely on wheel brakes only if the there is less engine braking.

[@shaik.ramzan7892]

This slipper clutch which model is this. ??

[@gamesshots1701]

Pulsar as150, ye Sleeper clutch Assembly use kara jaiga?

[@Games-xu6fh]

Guys, pls advise on if i can purchase N160, heard that bajaj engines develop issues afetr 2-3 years.

[@mushy8549]

What about the running speed and performance??

[@sayyedsalim9442]

Bro rs200 meh lagega bs6??

[@tomholland9340]

Thanks man I was searching this for long time , can you make a video on authorised front usd forks of bs7 to bikes bs6 and lower models than that and ? also gear shift indicators authorised ones

[@omkarvyas1359]

Hey man I am about to do this in RS200 PLEASE LET ME KNOW CONS OF THIS MODIFICATION SO THAT I CAN BE READY FOR ANY CONSEQUENCES

[@SonuKumar-vw2yi]

is this slipper clutch can be installed in pulsar 220f also??????

[@PrAtiKRoY-f7s]

Make a video on clear clutch cover for dominar 250.

[@binnadaprudvi4653]

Broo i have duke 200 bs6 will this slipper clutch work for me because clutch of duke 200 is hard please reply

[@gauravpal4187]

What's Your Review Now And This Is Worth And Suitable For RS200 BS3 ?

[@RIDERXMP50]

Can I install in ns 160

[@lefinamage9504]

Can I install a slipper clutch on my 200NS (2013 model year)?

[@varunnahshon7919]

Bro then i guess the same clutch assembly can be used for a bs3 duke 200 as well? Please let me know! Thanks

[@ARKIONX]

Yes

[@user34202]

Can we install ABS on NS200 2017 model

[@akshayveralkar4611]

yes but will cost approx 30 to 50k

[@warbot2544]

Bro make a vdo on Installation of SC in r15 v2 ( have see in some vdos that r15 v3 SC is direct fit, but those vdos were not clear and detailed as yours )

[@aniruddhans5681]

Such useful video. Tnq bro

[@Koushik_19]

Please tell me bro Which headlight ?

[@christoshaji7334]

Bro is there any problem while installing on rs 200 2017 model

[@kishannr911]

Kindly do some videos on Speed 400 new bike, it does not come with rear wheel splash / mud guard which will make shock absorbs to get accumulate dirt.

[@ampassionstruck9138]

Can this be used in the Ns160 ??

[@gnrhkyfj]

bro why you dont install the outer hub of clutch assembly of n250 is there any diffrence on that

[@bjsp0309]

slight difference

[@Shatishgs]

I'm having NS 200 BS3 (2012 Model) can i install Slipper Clutch?...

[@Therjxrider]

can We Do Same With KTM Rc 200 bs3 please reply

[@ilhanayoob7187]

Bro plse help can I install new ns200 speedometer on bs6 ns 200 with all features of new model?

[@sushovangayen]

Obviously apply fresh oil on new plates to avoid burning it up abit..& also reminder of changing oil filter while changing it to a new one..😅

[@badmodder6712]

Bro i am having RS200 BS3. Will it work for it??

[@ARKIONX]

Yes 🙌🏻

[@niteshmewada02]

Is it fit directly to rs 200 ???

[@nayanumare1739]

I can do this in My AS 200 ❤️ You are awesome brother 🙇🏻‍♂️🙏🏻

[@uniquerider694]

Yes bro you can . M

[@Andresgonzalez0k]

De que moto es el embrague que le colocaste a la ns200?

[@Abhinash1993]

Please make video of installing duke 200 chain sprocket on ns200

[@DINESH-mr6dn]

Hi,Bro mine was rs200 bs4 i might be confused why you don’t use the outer hub of the assembly is there is any issue. Why because we replace the clutch after 30to40k km once on that time changing the full assembly is better than changing the inner unit?? That’s why asking your reply helps lots

[@ARKIONX]

Hi bro! I have explained the reason why we cannot use the inner basket of N250 on NS200 in my review video on slipper clutch. kzbin.info/www/bejne/b6iQo32Xi6-Hg9U

[@subhamkumar3088]

N250 comes wid 5 gears ..& ns200 with 6 ..? doesn't effect

[@naveenpinto4574]

No

[@madhukeshnp]

Can you tell me if the same can be done for CBR250R? or any other way? Thank you.

[@damaihati7151]

Different engine

[@madhukeshnp]

@@damaihati7151 omg! I never knew that Bajaj NS200 and Honda CBR250R has two different engines. Thank you for comfirming. Let me see if i can install Ns200 engine on to CBR.🤷‍♀🤷‍♀🤦‍♂🤦‍♂

[@helmetboy-zo8fn]

hi bro is this fix at in ns 160 are not

[@mvlvr]

Do you recommand changing handle bar.. im thinking to change from long time .. but i doubt if its safe on high speed and other conditions..

[@ARKIONX]

Hey @mvlvr If you are looking for a comfortable riding posture then yah, you can go ahead and replace your handlebar with duke 250 one or dominar 400 one Speaking of high speed safety, I have ridden approx 2k KMS with the same without any problems and the handlebar is strong enough to support the weight. Also in case if you are planning to change then I do recommend you to only use original bolts from Bajaj or TVS instead of cheap once.

[@mvlvr]

@@ARKIONX thanks responding.. was just going through your videos.. ur making some quality videos and explanation is excellent..ur so good at what you do..

[@rasta244]

Bs6 n250 slipper clutch can fit to ns200 bs6?

[@gowtham9153]

​@@rasta244i think we can

[@ruinsane46]

Hi Bro, can we install this slipper clutch in Pulsar ns 160 bs4??? Your response is much appreciated.

[@ARKIONX]

Hi 👋🏻! Unfortunately I haven’t checked the size of its hub compared to inner hub, and moreover I think it might cause issues with clearance if you install it in ns160. However ,if you have access to local spare parts stores near by, you can always take your clutch basket and compare its dimensions with the slipper clutch unit and then make purchase decisions accordingly.

[@heyitsfakawma4917]

how about rs200 do we can do the same with it??

[@lokierica6050]

Bhaiya can we install this slipper clucth in n160 ❤❤

[@abhisheksadmake2846]

N160 me nahi hai kya slipper cluttch?

[@raviroget]

Hi Bro, Thanks for the amazing video. Does this slipper clutch fit Pulsar N160 ?

[@dishantsharma3343]

I also want this ans , but i am doing engine breaking while rev matching so this technique works fine for me , and i don't feel any kind of back torque in my bike i also own N 160

[@AFFAIRZCURRENT]

Bhai ns160 mai bhi dal sakta hai kya

[@FreeSpirit-tt1ll]

Can we install ABS in non abs model ns200?

[@AsifAli-ck2py]

Is it ok for ns 200 2023 bs7 ?

[@sumitkumawat4127]

I have a bs3 ns200 sir. Can i install please reply

[@gg89899]

This is called detailed video, but henceforth no BGM please.

[@Sunilkumar-vg1kf]

Bro i’ve a doubt ns has 6 speed gear and n250 has 5 so is there any issue for 6th gear after installing slipper clutch

[@ARKIONX]

No issues bro.

[@Sunilkumar-vg1kf]

@@ARKIONX which is 6 plates required for ns bro. N250 has 5 plates so i’m confused how it happens. Cause i don’t want to spoil my engine i need proper knowledge about this.

[@gnrhkyfj]

@@Sunilkumar-vg1kfyes right

[@gnrhkyfj]

@@KurhaediHartokoso its safe for higher rpm like stock clutch assembly of ns

[@TOPE...223]

Is this dominar 400 indicator plz reply 😊

[@ARKIONX]

Yes

[@shaikh1917]

Sir slipper clutch is available for avanger 220 models

[@thundersquad757]

I'm also researching for past four years. But not found yet.

[@stevenlomath5935]

Can i add this slipper clutch to my new gen rc 200 as of both engines look like same

[@ARKIONX]

Yes you can

[@varunshetty03]

Can we get slippers clutch for rs200

[@sudhanshukumar-wy4vf]

Housing different hai ya same.Aapne housing kyu nahi badla.

[@ARKIONX]

Different housing, I have explained it in my review video.

[@manasmgodbole8680]

Soooo 5 gears or 6 ?

[@adrianchonm]

Good morning I’m from Colombia my question is this slipper clutch for pulsar n250

[@ARKIONX]

Yes

[@adrianchonm]

@@ARKIONX thank you for answer me, I’ll get it and install. Is only install no need any modification

[@rahuldebnath5079]

Tumne indicator ko customise kasa kia

[@PSDeep]

what did you apply on gasket before installing cover? slipper clutch cost and of which bike??

[@Ultimateajit]

3300 and that is dominar 250cc is direct fit for NS200 and RS200

[@simhadrinaidu262]

bro top speed how much bro after slipper clutch installed 🙄

[@mohitranjitthakur]

No increase in top speed , only pick up , acceleration, mileage, smooth gear shifting and less jerk meanwhile downshifting

[@debojyotimazumder6692]

Will it fit in n160?

[@ranger4770]

can this be installed on the old ns200 and as200 aswell?

[@ARKIONX]

Yes

[@crazyrestorer2020]

New rc 200 will it fit?

[@dfrancisco7095]

Can put a link on where can we order?

[@halfevilme]

Bro is it ok for bs3 Edition

[@rohitbaruaaa]

I was waiting for this video..Thank you, is there any problem after riding for longer hours?

[@ARKIONX]

No problems so far, will post a separate video on the experience after installing slipper clutch.

[@warbot2544]

Indicator and projector headlamp link ?