*Install* Stainless Works Catless LT Headers w/ X Pipe! 2011 Silverado 5.3!! **LOUD WARNING**

Ryan has had a Stainless Works Cat Back on his truck for some time now, and it just wasnt loud enough. In this video we install Stainless Works Catless Long Tube Headers with an X Pipe to make a true dual exhaust set up on this 2011 5.3 Silverado!
Subscribe to my channel for videos of my 1997 Ford Taurus SHO that I am restoring, content on my dream truck- 2012 ram 1500 hemi, and my buddies Silverado’s build! Also videos of car meets and events and installs!
Check out Andrews Channel!!
kzbin.info/door/6ttY3r30ggoz7KVIyk7UHg
Instagram: shooff3.4
Silverado Owner: russell7542
Twitter: @ZachZwhiteboy
Middle Song: kzbin.info/www/bejne/Z57SdailiLqNo6c&ab_channel=NoCopyrightWorldwideSounds
Outro song: kzbin.info/www/bejne/anLLlYd9oqZ6nK8

[@JohnSmith-xx1lx]

I like to lay down in the engine bay, that's one of my favorite things about these LS motors. A lot of people don't know it but there's a way to do it comfortably yes without breaking anything.

[@MrDodgeman79]

That was a beautiful sound. Beast

[@papilewis1517]

I’m convinced man, thank you for this😅 Music to my ears man it sounds nice👍🏻

[@elicarrillo632]

That's gonna be my next buy!

[@coarsegrind]

Very nice install.

[@carbuff81]

Wow, the truck sounds great! Love it. Now does he want to sell it to me, haha.

[@shawng7902]

Most just want them obnoxiously loud. That truck has a killer sound. Hard to tell how loud it really is from a video but tone is great.

[@michelledoyle9261]

I wish I knew where your tbss was..i needed those headers!

[@ssgstorm6509]

Nice. Looking for headers with or without cats for my 2020 silverado 2500 6.6 gasser

[@zchannel7671]

Sounds badass I’m definitely interested in getting headers on my 2021 5.3

[@eltorro663]

Same on my 2019 😂🤟🏼 but Cali cops are going to be on me

[@CesarHernandez-lh9xw]

Gracias

[@shawng7902]

I swear I dont think Ill ever work on mine again without pulling the inner fenders out. That 10 min of work saves 10hrs of not reaching. Its full exhaust time on my truck I think.

[@frankdatank7751]

Nice setup!! Did you need 02 sensor extensions for the front ?? Thanks!!

[@tman2505]

No

[@santiagocisneros3002]

Best headers for a 2013 1500 6.2? Chevy

[@MrSquidna]

thinking about doing this on my '14 Silverado with some speed engineering headers. I also have a broken bolt by cylinder 1.

[@Shooff3.4]

Do it! Definitely worth it !

[@carterallsup6529]

Do it. i have speed engineering headers in my 11 suburban and the fit like a glove. you won’t have any issues with fitment at all

[@ericsych821]

@@carterallsup6529 I have a 2013 suburban and I read there is issues with y pipe and 6l80 trans did you have any issues

[@ethan5989]

Can u send the link where u got those s headers from

[@justinmuscle]

Got a video of just the x pipe before? So I can see how much louder it is with the headers

[@Shooff3.4]

No, he just had the cat back on before, then with the headers came the x pipe

[@IMRgarage]

Did you guys have to remove the steering shaft to get the header up in there ?

[@Shooff3.4]

Not that I remember no

[@Pablo-zl3so]

Which gaskets do you guys recommend for long tube headers ? Also can I get som at auto zone or oreilys

[@Shooff3.4]

Factory gaskets are fine, pretty cheap too that’s what we put on this truckn

[@CesarHernandez-lh9xw]

Me puede decir como conectaste los sensores de oxigeno

[@bogey19018]

The problem with that type exhaust, you either have to drive slow or fast. In the middle cruising sucks.

[@Infamous_lml]

Did you have to get O2 sensor harness extensions?

[@Shooff3.4]

I’d recommend getting them because some trucks need them and some don’t. He put his on

[@aarons.5523]

Lol doin headers on these is a pita cuz those damn factory bolts always snappin. Almost better to just pull the damn engine and do a dod delete and cam while its out lol

[@rndmxcessmemories8496]

Did you put both headers thru the bottom or top?

[@Shooff3.4]

Bottom

[@TheBossXVI]

Did you guys get a check engine light

[@Shooff3.4]

Yes, will definitely need a tune with headers

[@andresrojas2747]

What about the sensors? What did you do with them?

[@Shooff3.4]

02 sensors are still used

[@krazykazy3007]

Hey brother do you know how many horses you gain from the long tube headers just curious

[@ambroseunderwood4249]

Brother

[@kylegreen378]

Its around 35 to 45

[@SuperChrisssssssss]

Gm header bolts blow

[@MarioMartinez-bo5pf]

did you have to get it tuned?

[@Shooff3.4]

Don’t have for it to run but it’ll run better if tuned

[@k-a147]

How much you think a mechanic would charge me for installing these? $$?

[@kannan4283]

Did you get a check engine light after installing, if so how did you fix it

[@Shooff3.4]

Got it tuned right away

[@kannan4283]

@@Shooff3.4 ok where can I get that done

[@Shooff3.4]

Have to find a reputable tuner that you like either in your area or one that does email tunes

[@bofadznutz]

What is this exact items/ set ups? Can you please say?

[@Shooff3.4]

Stainlessworks 1 7/8 long tubes with a catless X pipe into a true dual stainlessworks catback

[@trevorspruce1361]

How did it fit around the driveshaft???

[@Shooff3.4]

Front or rear? Either one they fit around it just fine

[@trevorspruce1361]

@@Shooff3.4 ok I just ordered long tubes with y pipe for my 08 and was worried if that would clear thank you!

[@Shooff3.4]

Sweet! Yeah no fitment issues with these stainlessworks. Shouldn’t be any fitment issues with any brand honestly

[@Stealthcola]

Raaaaspy.. The only way to kill it completely is to get those pipes the same length going into the x-pipe and out.. That means going under the transmission crossmember though..

[@jacobnichols7899]

You can still do equal length running down one side. You've just gotta use the same amount of pipe. Meaning you gotta roll up the tubing for the passenger side bank of the engine.

[@johnnyboy8497]

what mufflers you running ?

[@Shooff3.4]

Stainlessworks mufflers

[@heathshaw1549]

What mufflers u running

[@Shooff3.4]

Stainless works cat back

[@williambradley5300]

Will it pass emissions

[@Shooff3.4]

Being catless, no

[@zanixinaz]

Did you gain any HP?

[@Shooff3.4]

Yes, with a tune you can gain 20-30 hp

[@joshuawesbrooks7295]

Does long tube headers kill your gas mileage?

[@Shooff3.4]

Not horribly, especially after it’s tuned

[@cemetery76]

yea because it gives you a heavier foot

[@nathangivens20]

Can we get the link for the headers ???

[@Shooff3.4]

stainlessworks.net/by-vehicle/chevy/silverado/2007-13-silverado/

[@Stop_the_cap311]

Is this a stock cam ?

[@Shooff3.4]

Yes, but just posted videos on a stage 2 cam we installed in the truck!

[@Stop_the_cap311]

@@Shooff3.4 thanks for the response your truck sounds mean. I just ordered the sw cat back for my 2016 Silverado and it’s also a 5.3.

[@Stop_the_cap311]

Catless means high flow?

[@frankfavela4375]

We’re can I order these for my 2013 GMC Sierra

[@Shooff3.4]

Right on stainlessworks website!

[@frankfavela4375]

@@Shooff3.4 what are they called I have a 5.3 gmc 1500

[@frankfavela4375]

@@Shooff3.4 is it the long tube header kit for Camero

[@Shooff3.4]

No, put your vehicle make model and year into the page, and the headers for your specific vehicle will come up

[@frankfavela4375]

It only says it has cats how do I choose catless

[@texasmike7994]

1 7/8 a little excessive on a stock engine

[@Gideon_Judges6]

people have been saying that since at least the LS1 but it always makes more power

[@lynnv5838]

How much it cost those headers

[@Shooff3.4]

Close to 2 grand

[@noahkb80]

Whaaaaat😱