This video describes what to do, before you start up your BAUER compressor for the first time. (Junior II and PE 100).
Пікірлер: 18
@lusajondaga4892 Жыл бұрын
very nice description
@thisischanaldeath Жыл бұрын
Danke schon
@shalikapriyani7655 Жыл бұрын
I use BAUER Kompressoren Junior II. I got a problem during using the air compressor to refill the air cylinders. As per the instruction manual, international filling connector connected to the air bottle, opened the cylinder valve then pressure gauge showing present pressure of the bottle. Once I started the compressor air is not filling to cylinder, when removed the connecter from the bottle pressure gauge still showing the beginning pressure of the bottle without dropping. While running the machine I felt air leaking on top of the safety valve of filter cartridge. Advise m
@bauerkompressoren Жыл бұрын
The situation you describe can have several causes, so unfortunately a remote diagnosis is not possible. Please contact your responsible BAUER partner to solve the problem: www.bauer-kompressoren.de/en/bauer-worldwide/sales-partners-worldwide/
@taz0o0o0o0oo Жыл бұрын
I think you did not install the air filter, that what happened to us actually
@user-md7zb2dv4p4 ай бұрын
Hallo, can you please correct me if wrong, do I understand correctly that in this compressor configuration /automatic drain and switch/ filling hose shall be deflated completely once compressor switched off for a longer period? And when deflating of hose done using filling valve, filter unit still remains pressurized to avoid saturation of filter. In other words depressurizing of filling hose will not cause that filter unit will lose pressure completely?
@bauerkompressoren4 ай бұрын
Hello, thank you for your comment and your question. We can answer this as follows: If the filling hose is to be removed from the tank, the filling adaptor/valve must be depressurised, otherwise it cannot be removed. This means that the connector is depressurised, but not the filling hose and the P21 TRIPLEX filter column. In other words, the unit is pressurised and this pressure should not be released from the P21 until the next restart. An exception to this is the 2nd stage intermediate separator, which is depressurised after the unit is stopped. When the unit is restarted, any remaining pressure (depending on how long the unit has not been in operation) should be released in order to avoid peak current consumption.
@omidn2876 Жыл бұрын
How long fill out the scuba tank?
@bauerkompressoren10 ай бұрын
The duration to fill a diving cylinder depends on several factors like charging rate, the size of the cylinder as well as the filling pressure. If you have for example a JUNIOR II or PE 100 with a charging rate of 100 l/min, one 11 l diving cylinder, as well as a filling pressure of 200 bar, it would take approx. 22 minutes to fill the breathing air cylinder.
@fabitos7 Жыл бұрын
cual es el valor o ,precio de este compresor???
@bauerkompressoren10 ай бұрын
Please have a look at our official sales partners worldwide and contact the one next to you for price information: www.bauer-kompressoren.de/en/bauer-worldwide/sales-partners-worldwide/
@sergekekourakoyvogui72662 жыл бұрын
Hello . it's working by fuel or electricity ?
@rethishkr92 жыл бұрын
Electric
@vabeachjuggalo3 Жыл бұрын
It is electric drive. You can buy a gasoline version of the JRII if fuel is easier for your use.
@edgararaque7335 Жыл бұрын
Buenos días necitamos aceite y filtros
@bauerkompressoren10 ай бұрын
Please contact your local BAUER dealer for ordering required parts and consumables: www.bauer-kompressoren.de/en/bauer-worldwide/sales-partners-worldwide/
@comercializadoradiaz922810 ай бұрын
Quiero adquirir 3 equipos bauer junior ll a gasolina 4500psi Para mexico
@bauerkompressoren10 ай бұрын
We are pleased about that. Here you can find official BAUER dealers in Mexico: www.bauer-kompressoren.de/es/bauer-internacional/puntos-de-ventas-en-el-mundo/america-del-norte-y-central/