Installation of CHINT DTSU666-CT (SOLAX) meter and current clamps (ENG)

[@georgeesselink7622]

Thank you for the clear instructions. the manual is very bad so i had troubles to get it working. With these instructions i got it working.

[@almasolar9176]

Yes thank you, it's why we are continually integrating new video to setup or install our inverters. Thanks for your feedback

[@TheUltimoplayer1000]

Excuse me i have a question, can i use this smart meter in mi house that is 2 Line and 1 neutro?

[@almasolar9176]

Yes, it's a Three phase meter, you can use it. This meter is connected to SOLAX inverter. Do you have SOLAX inverter? If yes, you have to order meter to SOLAX official distributor like ALMA SOLAR. If not, you may have trouble which we couldn't help you.

[@thomasfederau442]

are the colors brown and brown/white correct? Pin 4 and 5 would actually be blue/white blue, right?

[@sylwesterjabonski8933]

Hi. Do you know if I can conect dtsu666-ct to hoymiles dtu pro s? If yes then should I follow this instructions or this what is on hoymiles movie?

[@almasolar9176]

Hi, we are sorry but we never tested this meter to Hoymiles inverter so it's impossible to confirm that will work

[@sylwesterjabonski8933]

@almasolar9176 is ok. Thank for reply. In the meantime i have conect it like distribution says not like hoymiles and its working. Only what get me nervous is that in hoimiles app it's showing that at night time I'm taking from gird 20w where I'm charging my car and many another thins are working and it's showing 20w🤔

[@almasolar9176]

@@sylwesterjabonski8933 The problem is 20W is very low. Hoymiles is not taking the value every second but certainly every 1min. They give to you the value at the moment. Maybe few second after it's 0W.

[@sylwesterjabonski8933]

@@almasolar9176 To everybody who is reading this, DTSU666-CT 100A is not working corectli with DTU pro S from Hoymiles. I tray changing the transformers but it doesn't help. Something is changed inside so I need to give it back to seller and buy correct one.

[@sylwesterjabonski8933]

@@almasolar9176 Can I change some settings in DTSU? Maybe there's a problem that my app dont measure all parameter correct? Like current ratio?

[@dilawarhussainawan6482]

Can i use this with my three fase inverter ongrid to on one fase wapda or ups??

[@almasolar9176]

THis video is only for SOLAX inverter and DTSU666-CT meter (ordered to SOLAX official distributor like ALMA SOLAR). You can't use another inverter or meter. Or if you use, we can't help on what wrong is it.

[@BoRn0XX]

Why is a cable cross-section of less than 1.5mm² recommended ? I used 1.5mm²

[@almasolar9176]

It's recommended because the port is very small but if you connected with 1,5mm2, there is no problem

[@abdulrehmanali8035]

Asalam o alaikum sir chint device work on Huawei inverter

[@almasolar9176]

We never tested on it. as Huawei advice to use it?

[@informativevedios2847]

How can i get this... What its price What a benefits of this meter pls tell em

[@almasolar9176]

You can order it here: www.alma-solarshop.com/photovoltaic-accessories/859-meter-sdm630-for-solar-inverter-104004003800.html It help you to know which power you inject or use from grid. It very useful if you want to inject overproduction to grid. Without your inverter can't manage it outpower. Please read your SOLAX inverter manual or see our installation inverter video to understand the value of it.

[@nadeemulhaq2003]

can i attach any smart meter with Solax Inverter to check Import/Export in Solax APP. Solax Recommend Chint EPM meter., DTSU666-CT(with solax logo) but if i use some other model as example یعنی وہ میٹر جو امپورٹ اور ایکسپورٹ کا ڈیٹا رکھتے ہیں کیا سارے چل جائیں گے ؟ Normally smart wifi , bidriretional Meters 3 phase in china +10000 Pak Rs 10k to 15k Rs Now not sure will work with solax or not ?

[@almasolar9176]

No you need to use the meter sold by SOLAX. You will not have the right datas if you are using your own one

[@informativevedios2847]

​@@almasolar9176do u have this device.. I want to install it on my solax on grid 10kw inverter. My inverter giving me fault meter fault . Pls guide

[@informativevedios2847]

One more thing my inverter port is RS485 not a lan port how we connect this device to inverter than?

[@almasolar9176]

@@informativevedios2847 Which inverter is it? you should Meter port dedicated for your meter.

[@张宁宁-l7h]

你好，朋友，电表一般是要配合逆变器使用的，所以具体的电表需要根据逆变器厂家来决定，如果之前是chint，那最好还是chint，你这的逆变器是哪家厂商的呢？

[@samomara1256]

L1 is brown and L3 is grey