Рет қаралды 411
Explained step by step:
Application • This integral cylinder is suitable for DHW heating in heat pump mode. • The appliance is prepared for the optional addition of another heating circuit. • The equipment simplifies the hydraulic connection in heating systems, as the heat pump and heating circuit flows are separated by means of an integral buffer cylinder. This means that it can be used in different heat distribution systems. • Can be used for heating and cooling in a detached house (new or existing building).
Convenience features • DHW cylinder and buffer cylinder are steel cylinders with directly applied foam insulation. The DHW cylinder is equipped with an internal indirect coil and magnesium signal anode for additional corrosion protection. The two cylinders are mounted one on top of the other to save space; practical recessed grips facilitate handling. • Space saving installation through integration of key components in a single casing: WPM heat pump manager, cylinder charging pump, circulation pump and 3/2-way diverter valve. • Easy to handle, as the DHW cylinder and the buffer cylinder can be transported separately.
Efficiency • Low standby losses as both the cylinder volume and the heat exchanger surface area are matched to requirements.
Installation • The DHW and buffer cylinders are arranged one above the other and can be separated. Two recessed grips facilitate transport to the installation site.
#StiebelEltron #SouthAfrica #Renewables #Tutorial
Find us here:
/ stiebeleltronsa
/ stiebeleltronsouthafrica
/ 14063768
Technical data: www.stiebel-el...