No video

Installing a 1.5" lift on a 1995 Mitsubishi Pajero Mini

  Рет қаралды 4,242

Joseph Carlson

Joseph Carlson

Күн бұрын

Пікірлер: 35
@williambreeze2659
@williambreeze2659 7 күн бұрын
Not bad not bad!
@genecarlsonii3115
@genecarlsonii3115 9 ай бұрын
Nice job Joe. I'll talk to you later about lift ideas for my Volvo XC70....
@aaronbrook225
@aaronbrook225 4 ай бұрын
Nice one brother... Did you have to use hub spaces to get clearance for the front brake calipers and if so what ones are you running?
@bohprezident
@bohprezident 8 ай бұрын
Nice work man. I noticed your pajero mini has the stock side step/rock sliders… are they pretty stout or purely cosmetic? I’m curious if they break easily
@josephcarlson1774
@josephcarlson1774 8 ай бұрын
I would say they're purely cosmetic, it has all the Ralliart package extras that came on these and the only thing that is actually functional is the aluminum skid plate up front.
@Nardypants
@Nardypants 9 ай бұрын
I'm really wondering if the brake calipers are different between the Mini and the Junior. I got 15x8 Vision D rims in +6 and they just won't work as is in the front on my Junior. I'll have to put in 10mm spacers just so it clears the calipers. Did you have any issue on that front? I can't believe the 12mm difference in offset would make that much of a difference?
@josephcarlson1774
@josephcarlson1774 9 ай бұрын
I didn't notice if it was that close, they just went on without out issue. Next time I have it on the lift, I will check how close the clearance is and let you know.
@josuheserrano2285
@josuheserrano2285 Жыл бұрын
Do you think these wheels will do good at long term? Heard they are heavy and may cause premature wear on some drivetrain components. I love how it looks and want to buy them but have that in the back of my mind.
@josephcarlson1774
@josephcarlson1774 Жыл бұрын
They are a bit heavy compared to the factory wheel, but people(including me) of done this kind of upgrade to Suzuki Samurai(Jimny) for 30+ years without issues. We used to put 33x12.50's on heavy steel wheels and off-road them pretty hard. The PJ mini is built like a tank for a Kei car, I really don't see it causing of an issue besides maybe putting a little more wear or brake linings...
@josuheserrano2285
@josuheserrano2285 Жыл бұрын
@@josephcarlson1774 well that is what I needed to know, def getting these with some a/t's down the road
@jakegaier
@jakegaier 9 ай бұрын
Are you using wheel spacers?
@josephcarlson1774
@josephcarlson1774 9 ай бұрын
Nope
@abrishatube
@abrishatube Жыл бұрын
Do you think the samurai rear shocks fit the pajero mini with out the spring spacers ...?
@josephcarlson1774
@josephcarlson1774 Жыл бұрын
They will fit. The compressed length is so close to the factory size, it don't think it would ever be a problem.
@abrishatube
@abrishatube Жыл бұрын
@@josephcarlson1774 since parts are rare and expensive i don't mind sharing the samurai parts..🤣
@abrishatube
@abrishatube Жыл бұрын
@@josephcarlson1774 and i wonder if the propeller shaft u joint is same as Mitsubishi L200 and the pajero montero.. from the 1997. Mine is going out..
@josephcarlson1774
@josephcarlson1774 Жыл бұрын
@@abrishatube the u joints are probably bigger in the Pajero than the mini...
@abrishatube
@abrishatube Жыл бұрын
@@josephcarlson1774 i researched the internet the pajero jr and mini share the same u joint part number see for Your self
@TQchannels
@TQchannels Жыл бұрын
Was thinking of changing my shocks and struts. Are the suzuki samurai compatible for both front and rear?
@josephcarlson1774
@josephcarlson1774 Жыл бұрын
No, the front of thr PJ mini uses struts on an independent suspension, the samurai has a Solid axle with leaf springs.
@Official_VEA
@Official_VEA Жыл бұрын
What cross bars do you use for the roof rack?
@josephcarlson1774
@josephcarlson1774 Жыл бұрын
They came on it from Japan so I'm not sure. I also didn't get the keys for them so I can't adjust them...
@jamesloc9928
@jamesloc9928 Жыл бұрын
かっこいい!😊
@blondiemandere7591
@blondiemandere7591 Жыл бұрын
What performance tuning can you do on the Pajero for it to go faster with those heavy tires on it?
@josephcarlson1774
@josephcarlson1774 Жыл бұрын
You can turn the boost up a from 10psi to 14psi before you hit the factory set boost cut. Other than that, maybe swapping on an aftermarket ECU that can be tuned?
@martinmendiolamm
@martinmendiolamm 8 ай бұрын
​@@josephcarlson1774how did you turn up the boost?
@josephcarlson1774
@josephcarlson1774 8 ай бұрын
@@martinmendiolamm just a cheap manual boost controller from eBay. It's just a simple bleed valve implacable of the factory boost controller. Turn it up til you see 14psi or 1bar and leave it there so you don't hit boost cut.
@lenghtofpull
@lenghtofpull Жыл бұрын
Do you have any rubbing with that wheel and tire set up
@josephcarlson1774
@josephcarlson1774 Жыл бұрын
None at all
@anjosvlog7794
@anjosvlog7794 Жыл бұрын
Have you do cambering on your front wheel?
@josephcarlson1774
@josephcarlson1774 Жыл бұрын
It does have a small amount of positive camber. You can slot the 3 upper strut mount bolt holes to lean the top of the strut inward.
@ffmanan3630
@ffmanan3630 Жыл бұрын
Sir kindly mention your mini Pajero tyre size ,thnx
@josephcarlson1774
@josephcarlson1774 Жыл бұрын
235/75r15
How dose it sound ?
10:31
Benny's Custom Works
Рет қаралды 14 М.
PAJERO MINI | Wonky Broken Suspension
6:55
Benny's Custom Works
Рет қаралды 17 М.
managed to catch #tiktok
00:16
Анастасия Тарасова
Рет қаралды 48 МЛН
❌Разве такое возможно? #story
01:00
Кэри Найс
Рет қаралды 4 МЛН
Whoa
01:00
Justin Flom
Рет қаралды 50 МЛН
Huge Tires On Kei SUV! Will They Fit?!
14:56
Print Shift Repeat
Рет қаралды 24 М.
Мега лифт Сузуки Эскудо
31:28
СТО Ермак
Рет қаралды 51 М.
This is the best Kei Car Money can buy | Mitsubishi Pajero Mini
11:56
4WD Mini Pajero | BUSH TEST + Cooler & Fan Upgrade + Restored Wheels
12:15
Benny's Custom Works
Рет қаралды 12 М.
Mitsubishi Pajero mini Turbo gets a custom exhaust
7:13
Joseph Carlson
Рет қаралды 5 М.
managed to catch #tiktok
00:16
Анастасия Тарасова
Рет қаралды 48 МЛН