Installing a Injen/Kyostar Cold Air Intake! (BMW F32)

[@TheDonz]

I just installed mine just 10 minutes ago. What I did different with the top cover, I put the cover over the back plate and put the screws in, it holds it in much better than the way you did it. Because the 4 screws you have in are not doing anything the way you have done it.

[@joshuasherwain]

Well done. That's great you did it a different way. It's all learning. The screws ain't the best that comes with it though. But I haven't had any problems with mines.

[@TheDonz]

Yeah the shape of the cover is a bit off too, has to bend the flappy things on the side to get them to screw in which was a major pain in the ass, but either way it looks pretty stable and sounds great still

[@joshuasherwain]

@@TheDonz , yeah I know what you mean. But it won't give you any problems. It sits and holds in well. Definitely sounds amazing 👌🏾

[@lsreborn]

Good video my guy. Rev that bad boy. can you upload a video of revs from the outside?

[@joshuasherwain]

Thanks for the comment. Yes I'm gonna be uploading one soon. Plus some tunnel run's etc👍

[@glorysantana777]

I installed mine and I've been experiencing mixture codes I changed my throttle body I changed my hose for venturi and breather valve and now I'm going to change my Map sensor I'm not sure what the code is

[@joshuasherwain]

That's great. Are the codes still popping up or not? Hopefully, they would have gone. Some people experience the codes, and others don't. Hopefully, you have sorted everything👍🏾

[@juice6378]

Did yours rev up to 2k rpm after you start it on cold start mine has been doing that and idk why

[@joshuasherwain]

No, I don't remember it doing that. What other modifications have you done to your car?

[@akacharr3207]

mine does too

[@joshuasherwain]

@akaCharr , I don't understand why both your car's are reviving up

[@juice6378]

@@joshuasherwain nvm I made my own vacuum line and it helped it

[@juice6378]

It’s because you need the vacuum line and it doesn’t do it as much just a little but then I got the tune and now it doesn’t do it

[@sharp3110]

What year is your bmw bro? And where did your vacuum wire go? I have a 2014 328i and I wanna get this but I don’t know where the vacuum wire goes.

[@joshuasherwain]

@sharp3110 , Hi bro. Mine was a 2014 model, and I didn't have a vacuum part, but you can either tie it up or put a rubber nipple on the end.

[@SPADERZ216]

did you ever have to upgrade your mass air flow sensor after installing this new intake? im getting fault codes 118001 mixture control: mixture too lean

[@joshuasherwain]

No, I didn't. It worked fine 👌🏾. That's strange. I wonder why. Try cleaning around the sensor and the area where it sits

[@SPADERZ216]

@@joshuasherwain Weird thing but after I changed my ignition coils and spark plugs the fault code and engine light went away, not sure if its relevant but seemed to have fixed my issue.

[@joshuasherwain]

@@SPADERZ216 That's great 😊🙌🏾. I'm glad to hear that it's finally working 💪🏾. Good job 👏🏾

[@rahelanuthayakumar7212]

Do you think we can get a Cold Air Intake system for the BMW F34 GT models?

[@joshuasherwain]

Hey there, thanks for the message. Of course. There's a few available see link below www.ebay.co.uk/itm/153575916195?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ltOho6afTNO&sssrc=2349624&ssuid=1aciLuO_R0-&var=&widget_ver=artemis&media=COPY

[@arturkornacki3975]

Hi i have question. This will be to fit 320d f30 2012 ? Pleas for help or maybe u know where i can find good one ;)

[@joshuasherwain]

Hi there, please check the link below. Contact seller as it's just stating the 320i etc not 320d but check seller for confirmation. www.ebay.co.uk/itm/276429890648?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=nIL9baEGRnq&sssrc=4429486&ssuid=1aciLuO_R0-&var=&widget_ver=artemis&media=COPY

[@sharp000_]

The hose that you took off the stock one what did you plug it into because mine is just sitting there and my check engine light came on and it's not running right

[@joshuasherwain]

Are you talking about the hose from the outside of the air box? If so that doesn't get disconnected. Also have you connected your mass air flow sensor?

[@sharp000_]

@@joshuasherwain yes the one hose that disconnects from the outside of the original air box and yes I put the mass air flow sensor on the new intake just don't know where the other hose goes after I disconnected to from the old air box its just there because there is nothing to put it into on the new one

[@joshuasherwain]

@@sharp000_ , oh what model car have you got?

[@sharp000_]

@@joshuasherwain 2014 328xi sport package

[@joshuasherwain]

@@sharp000_ , I think that extra hose maybe your vacuum line hose.

[@aaronsamadi133]

Nice job thx!

[@slimeokokok9073]

where did you put the vacuum hose at

[@joshuasherwain]

Have you got the Kyostar induction kit as well? If so it doesn't come with a connection for the vacuum hose. So you can either plug it with a rubber or see if you can secure it so how to the intake tube. You may have a different model as I have a bmw 420i. Only the injen induction kit comes with the vacuum hose connection.

[@MigueBatista-d4w]

where did you connect the vakiun?

[@joshuasherwain]

My one didn't have a vacuum, so normally you can attach it to the rubber end that sometimes comes within the box or if they do have a tip on the intake where you can attach it then you are good to go.

[@proreframe6057]

Do i need to tune my car before i install this intake?

[@joshuasherwain]

No, it is best to fit the intake first, and then you can tune your car.

[@proreframe6057]

@joshuasherwain appreciate the answer thanks 🙏🏿

[@jobkim448]

Hey bro i just installed mine and ive been having check engine light with code p0171 which is lean. But i cant find any leaks on my intake. Did you happen to have the same problem? Thanks

[@joshuasherwain]

That's great bro. Never had no check engine lights. Have you double checked that everything is connected correctly. It's strange. It's normally a plug and play. No engine error code should come up.

[@jobkim448]

Yeah i checked everything and it seems like everything is okay. Until i checked the maf sensor pipe. I think thats the reason why i have check engine light.

[@joshuasherwain]

@@jobkim448 , nothing wasn't damaged in the process was it? Have you tried resetting it and see if it does anything? If not try and put back the original one and see if you still have the same problem. If not than. It may just need resetting but it shouldn't have any engine light at all.

[@groef400]

I've gotten the same lean codes. Did you solve it, did you solve it in the end?

[@groef400]

​@@jobkim448did you solve it per chance?

[@hackersdelcampo6564]

the check engine light come on after the installation?

[@joshuasherwain]

No engine light came on. It was all fine without any error codes

[@chowsie15]

How did u find the performance and sound of it. The overall quality?

[@hackersdelcampo6564]

@@chowsie15 i bougth one from ebay for 200 bucks it sound amazing and acelerations is better sorry my english is not good

[@joshuasherwain]

@@chowsie15 , The performance was increased a bit and the sound has nice tone to it. Quality isn't to bad.

[@SlumptDrew]

@@hackersdelcampo6564 so is it better than injen

[@prod.shottaa]

is injen and Kyostar the same thing??

[@joshuasherwain]

It's practically the same. They may be a slight price difference.

[@louisjones952]

Do you think this would work ok a 420d

[@joshuasherwain]

Yes it should work. They have the same setup.

[@jakeridgway6425]

Will this fit 2013 116d

[@joshuasherwain]

Hi bro, I don't think it will please see a listing below www.ebay.co.uk/itm/203154620838?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=cSQutYedQDq&sssrc=2349624&ssuid=1aciLuO_R0-&var=&widget_ver=artemis&media=COPY

[@joshuasherwain]

Also what model is your car like F series?

[@jakeridgway6425]

@@joshuasherwain f20 the air box is basically the same can’t find one for mine anywhere

[@joshuasherwain]

@@jakeridgway6425 bmw f20 induction kit, search this on ebay and go down the list bro. I'm sure the 116d or 116i will be the same.

[@jakeridgway6425]

@@joshuasherwain the intake for a 116i is near the top of the engine cover mines the same layout as yours lower down

[@sixhookedup2782]

Hey man , its been about a year , how is it holding up ?

[@joshuasherwain]

Hey, it's holding up well thanks. Car's just away ATM getting some part's upgraded on it.