Installing a Y8 Exhaust Header on Project Civic EK + NEW WHEELS!

[@spoonfixer3387]

Should have went with the 99-00 version. It's a tubular 4-2-1 design and looks like a header with the shield off. I gave one on my d15b and it was a nice upgrade over the 4-1 stock manifold that was on there before.

[@ADAMTREJO75]

I would never put a gasket between the manifold and B pipe.....That's why Honda put those two metal ring gaskets there. I did this same swap on my DX. Best upgrade in my opinion. Had to put a cat on tho as I live in California.

[@savagewarriorzz2199]

Took off my stock y8 headers for ebay headers. Definitely putting the y8 headers back on because the y8 headers has a bolt down brace. Ebay headers does not. I read over time if the hearders to down pipe isn't bolted down there's a possibility it could warp the head. I sure appreciate the videos that come out to teach us. Nice sound by the way :)

[@ocasperllv439]

probably black wheeels ; rota slips ; rota grids (te37 ); rp1s ; or maybe the weld racing vms rims ;

[@TheCitizenErazed]

13:08 instant rice

[@Curi0u50ne]

@04:40 Sounds like Steve Guttenberg talking about manifolds instead of big ol speakers or budget systems that sound good for under $1000

[@Coda5610]

Im guessing the wheels now, 1 of you guys atleast got either 949, slips, rpf1 or the Konig Hypergrams

[@karlsolitario8013]

Hype is real! My guess is it's Rota Slipstream

[@manuellopezej1]

finally been waiting for this

[@leoboy191]

So he had a check engine light for a unplugged 02 sensor?

[@dylelibatique7564]

Wait this fits it? Front pipe has different angle to put the bolt to it

[@djohnnineonesix820]

I have the MagnaFlow 448034 supossed to be the heavy duty of the 408034 cathalitic converter (CARB approved of course) original resonator and a mild MagnaFlow exhaust muffler on my Ej8 I love it.. Thinking on swap a b18c with the tegra automatic transmission into. But I'm not sure if the Ej8 automatic ecu can control a S4XA. But anyways I have a B18b1 with a S80 transmission with Type R internals except LSD. And a S4XA. And the p75-a54 and the S4XA computer. My Chihuahua hates manual transmissions because she can't ride on my lap.

[@G13BBPower]

Dude! Between the Header and Downpipe comes only the two O-Rings! Nothing the big silver Gasket. And you need a other Downpipe Braket.

[@Fruity_Boba]

I'm gonna guess some RPF1s since you seem to like the Meshs. They're kinda similar?

[@zacharyayers9653]

that exhaust sounds angry with the cat deleted cant wait to see more

[@freeshavacado7378]

Just started watching your guys channel. Are you guys planning with sticking with stock Honda parts for the most part in your track vids for both civics?

[@RefineMovement]

+Free Shavacado not usually. Just depends really on the mod and the price and what it's does for the build. We have a ton of other videos showing aftermarket parts. Check the playlists.

[@freeshavacado7378]

Refine Movement oh ok. Any plans to put in a roll cage?

[@RefineMovement]

+Free Shavacado I would like too but not anytime soon. My civic (silver coupe) is getting a new clutch and flywheel soon

[@balloney2175]

I have Y7 like yours, but you took away your cat converter?

[@allgasnobrakes1665]

Hey bro, when installing the down pipe gasket. Does it mattter which side it goes?

[@PeterChan-z3v]

2 stage Clutch and new brake pad Can last a mile long and back

[@monkey_madness9439]

I'm looking forward to that y8 intake manifold swap

[@deshawnameer6406]

i guess it's kinda randomly asking but do anybody know a good place to watch new movies online?

[@finneganrandall5667]

@Deshawn Ameer i watch on flixzone. Just google for it :)

[@kylejayden3825]

@Finnegan Randall Yup, have been using flixzone for since march myself :)

[@deshawnameer6406]

@Finnegan Randall thanks, I went there and it seems like they got a lot of movies there =) I appreciate it !

[@finneganrandall5667]

@Deshawn Ameer you are welcome :)

[@nickamarit]

Was that light on your dash the cat warning light? I remembered that when I decatted my D15 Civic, she threw a cat warning light.

[@RefineMovement]

+Nick Amarit I don't remember now but probably

[@akmalps9999]

Great vid! By the way, what is the best model Civic for starters in your opinion?

[@RefineMovement]

Starting out, I would say any 92-95 or 96-00 Civics, if you can get the Si model also the best. performance. The 88-91 civics are good but its harder to find parts. Also if you plan on modifying the engine get a Civic that is OBD1. This civic is OBDII which is fine but its want to throw more CEL codes

[@manuellopezej1]

Akmal Manan 92-95 civic

[@akmalps9999]

Refine Movement thank you for answering my question.

[@Adamdub612]

With the Y8 setup how much hp do you think you got total? Great looking Civic! 😬

[@RefineMovement]

+Adam White Sr. there's no way to know, unless I dyno it. I'm just hoping it puts down 100hp to the wheels

[@balloney2175]

Engine light is on?

[@rafael8298]

Hello ,did you notice any diference after installing these headers?

[@RefineMovement]

Can’t remember really. I don’t think so. I just added some eBay headers and it did help with throttle response

[@Tec-fv2xb]

Why not just put an aftermarket header on?

[@RefineMovement]

+King D too expensive. Not wanting to throw money into a motor I may not keep

[@RefineMovement]

I just chose not to buy it. Send me yours if you want me to it so bad.

[@savagecivicboiproductions4029]

4-2-1 headers go for $40 on eBay

[@yeahyeah6518]

Why didn't you you use a spark plug defouler on your down stream o2, it should trick ecru into not throwing a c.e.l

[@RefineMovement]

I did

[@bbbt8090]

My Y8 was so slow but fun at the same time lol

[@mvilleproduction473]

Volk wheels...maybe te37s?

[@PeterChan-z3v]

New starter

[@GarageBuiltHondas]

Buddy Club P1's!

[@suicidaldemon]

Keep the ac!

[@bryanlarrea2867]

Is that intake manifold off an automatic y8? It has the iacv ports blocked off.

[@bryanlarrea2867]

You'll probably need a different throttle body too.

[@porterperformance8943]

better to run the y8 intake.... as its bigger

[@bryanlarrea2867]

Porter Performance Yeah but this one has the iacv ports blocked off. I'm pretty sure he also has to get a different throttle body too like a y8 tb. Yet again that's what I've heard on honda tech and d-series.org

[@porterperformance8943]

probably I didn't look at it that close.... he may have too

[@RefineMovement]

+bryan larrea it is from an automatic. www.clubcivic.com/forum/threads/how-to-y7-to-y8-intake-manifold-swap.59172/

[@raysegura7444]

Rays RE30 club sport?

[@allgasnobrakes1665]

Where do you connect the secondary o2 sensor?

[@RefineMovement]

+Jamesy_ EK9 in the test pipe if you get one for OBD2

[@allgasnobrakes1665]

Refine Movement oh ok thanks brother

[@bryanrojas6468]

What did u do with the second o2 sensor

[@RefineMovement]

Have u heard of the spark plug defouler trick? You had that to the tip of the o2 sensor and it tricks the computer into thinking everything is normal

[@bryanrojas6468]

Refine Movement thank I’ll be trying this on my ek

[@tatialo37]

Where can I get stickers?

[@xRagent11]

does the catalytic converter still there?

[@RefineMovement]

+JNathan Tatsumi no cat

[@theoddstreamer6918]

i have a 1992 Civic and i dont have a cat in mine????

[@iceyinferno]

Konig Dial in?

[@dsworks9760]

Konig Hypergram?

[@linusquist2387]

949 6ul?

[@aarynvalenzuela6872]

You throw a code with those headeds

[@rafaelsanchez3476]

Did u put the catalytic converter

[@RefineMovement]

No I put a cat delete pipe in its place

[@rafaelsanchez3476]

The cat deleted pipe is the one with is together with the header

[@rafaelsanchez3476]

The check engine is on in your honda

[@RefineMovement]

No it’s a separate pipe. No check engine light I had to put a spacer on my O2 sensor

[@rafaelsanchez3476]

4.5" MUFFLER TIP RACING CATBACK+HEADER+PIPING EXHAUST 92-00 HONDA CIVIC EG/EK/EM I gonna buy a kit for ebay

[@GODSGUNSGLORY]

Sw388's???

[@pablosanty509]

Rpf1?

[@rockytharpjr]

keep the a/c

[@PeterChan-z3v]

Short shifter ek

[@LosMntana]

Mindset wheel

[@louderthanlegal4423]

0:43, rpf1

[@AcousticFunnyman3]

Why not just get an aftermarket header?

[@RefineMovement]

Because they are more expensive. I dont want to dump a ton of money into a motor that may not be there for a long time.

[@mushy18100]

Refine Movement smart move

[@cunohuerta4680]

Klutch wheels SL1

[@elliot438bcfcVTEC]

Rota grid

[@Lastnamebundy]

advanti storm s1

[@MumbleVlogs]

Rita slips

[@vannakhem1241]

Rota slipstream

[@marcuskelley9591]

Rpf1

[@vannakhem1241]

Desmond reg's

[@TheTechnoGizmo]

Rota slips

[@JdmCarreras]

avids

[@angelleyva7880]

Kosei k1

[@CruuuzY]

Steelies lol