Installing All The Electronics Into the Huina 580 Hydraulic Conversion from Magom. Step By Step!

[@R.C.A.D.]

Watched from start to finish,😊👍 Great job all around !

[@RCConstructionHobby]

Awesome! Thank you!

[@R.C.A.D.]

@@RCConstructionHobby My pleasure 😊👍

[@PYROTEKNIX_]

I want to get a hydraulic upgrade but don’t know if I should go for the cheaper version from huina or just get the magom arm

[@RCConstructionHobby]

Get the magom. It's better.

[@tommyrescue82]

the track motors have a round green board on them do i need to take them off??

[@RCConstructionHobby]

If you are doing the conversion yes. You will want to install ESC's to replace the green board.

[@mastergame3243]

Where and where did you buy this ESC for the quick hit?

[@RCConstructionHobby]

The ESC I use are called tinyesc from fingertech robotics.

[@anthonyjones6107]

Thanks for the video can’t wait to up grade mine 👍

[@RCConstructionHobby]

Good luck!

[@MicaseHD]

What direction does the pump run??? does it matter??

[@RCConstructionHobby]

Yes the pump only runs one direction.the valves decide which direction tge cylinder goes.

[@billyrogers9624]

So was everything here all bought in one kit?

[@RCConstructionHobby]

The kit from magom has everything you need to convert it to hydraulic. You have to buy the huina 580 separately.

[@MicaseHD]

Where did you get the larger stick nobs on your radio in the thumbnail of this video???

[@RCConstructionHobby]

I designed them and printed them. They are available on cult3d to download.

[@cyker30]

Need this to upgrade mine.. nice vudeo..😊

[@RCConstructionHobby]

take a look at the aliexpress upgrade. it seems to be a little better and cheaper. I have issue with the valve block. seems a lot of people do.

[@krisclark4031]

Hi nice machine could you put up a link of were your got your remote please

[@RCConstructionHobby]

I bought the transmitter from Amazon. The sticks are 3dprinted. Search flysky fs-i6s

[@krisclark4031]

@@RCConstructionHobby thanks but in still struggling to fined one that has both sticks that return to the centre

[@RCConstructionHobby]

You can buy the centering stick for the flysky transmitter. Very easy to do. They cost like $5. Don't walk away from these just because the left stick is not centered. Buy the transmitter and add the stick centering kit. Very easy to do.

[@krisclark4031]

@@RCConstructionHobby ah ok thanks a lot I didn't know I could do that

[@alangriff1]

Is it usual to use brushless ESCs...I see most rc excavators using brushed ones

[@RCConstructionHobby]

Deoends on the type of motor. If it is a brushless motor then a brushless esc. If it is a brushed motor then brushed esc.

[@alangriff1]

@@RCConstructionHobby yes..I understand that. Thanks

[@alangriff1]

S then is a brushless motor better to use with hydraulics?

[@RCConstructionHobby]

For the pump yes. For the tracks brushed is better. Think if you want fast then brushless. If you want slow then brushed.

[@sed6]

How many more videos in the series until you're done? And when's the next one?

[@RCConstructionHobby]

Thst is it for this series. Back to the regular videos next week.

[@RCConstructionHobby]

Every Sunday 7am new video

[@RC-CARS-WORLD]

awesome,, great video 😀👏

[@nisann2713]

For what is BS5 ESC ,

[@RCConstructionHobby]

Track motors, slew motor and any accessories you want to add that have a motor.

[@PYROTEKNIX_]

I’m new to this hobby and all those wires are making me nervous

[@vbdino]

Your radio modification is also highly interesting if those are 4d sticks

[@RCConstructionHobby]

no they are not 4d sticks but they do look like them. I just 3d printed them.

[@speednut071]

Hey bud would you print me a set of those sticks? I'll pay you for them and pick them up

[@RCConstructionHobby]

Sorry I dont print these but you can get the 3d files to print them from Cults3d. I believe there is a link in the description of the video

[@nisanbharati8040]

Hey buddy I am a school boy of class 12 . After some days there will be a science exhibition. It will be very helpful to me if u make a video on how to install all wiring and hydraulic kit. In an excavator

[@RCConstructionHobby]

I made another video on installing the hydraulics. This video shows how the electronics are installed. I would be a very long video if I had to show every single step like cutting the wire and soldering.

[@wahyurc1790]

😲😲😲😲😲😲😲😲😲😲