J’avoue que c’est un sacré travail, je vous félicite grandement cela m’aurait plu d’avoir cela sur la mienne mais du coup je renonce car je ne pourrai pas le faire moi-même . Mais encore bravo. Bravo. Bravo à vous. Bien amicalement.
@print-master9 күн бұрын
shook my head long time before you did
@cexy63s4 күн бұрын
@@print-master ??
@MisterRandum3 жыл бұрын
Same issue on the passenger side of my s550 coupe. The light on that side sits a little crooked, I'll adjust it 1 of these days. Good vid tho, my knuckles bled too lol
@cexy63s3 жыл бұрын
😂😂 mannn I’m glad I wasn’t the only one that struggled with the install it was aggravating but well worth it 🙌🏽 thanks for the support man
@MisterRandum3 жыл бұрын
@@cexy63s Salute bro
@raysekulic12662 жыл бұрын
Mate, great video. I put one on my 2018 E300 coupe, which was hard like your video. Now I have a 2019 c63s convertible, I'm in Australia I believe we have similar ones to Europe. All I had to do was take the cover off and remove the camera. It just slipped in easy after that. Enjoy watching your video.....cheers👍 FYI....the Australian version I didn't need the blue things on the wire
@cexy63s Жыл бұрын
Thanks man ! Glad my video could be of help , good to know my video goal was achieved. Hope you been enjoying it
@haydenbiju3411 Жыл бұрын
Hey bro, I have the exact same car! Was it just plug and play? Any advice would be greatly appreciated!
@raysekulic1266 Жыл бұрын
@@haydenbiju3411 Hey Mate, when I did mine back when I made the comment. I only did one side at that time and stopped to watch this video (can't remember which side). After watching the video and making my comment, I then went back to finish the other side. This is when it got a bit trickly for me, while the first side was very easy (remove cover and plug and play) the other side required a bit more attention. I had to remove the cover, mirror first. for some reason the way the light is designed (a little bit larger than the original one there) I had used a filing tool to enlarge the area where the light will slip into. The filing was done on the plastic "honeycomb" like frame inside the light and took about 15min extra. so, one side will be very easy, and the other side will take a little more time and soon modifying of the mirror. as mentioned above, did this first to my 2018 E300 and then my C63s. I'm very happy with the results.
@haydenbiju34117 ай бұрын
Amazing! Thank you for helping :) how would you say the lights are holding up
@ianmuir36402 ай бұрын
Mines was in the bottom of the door pop the old one out and connect the new one and pop it back in finished same both sides
@zayheadmedia32153 жыл бұрын
Fye🔥🔥🔥
@omedafzali32692 жыл бұрын
Best video realy i have this Problem today i make this a Little Bit Otter and have many problems thanks
@cexy63s2 жыл бұрын
I appreciate it that man ! Glad you found and liked the video ! More videos coming
@Yuwan4103 жыл бұрын
Damn that was a longer process than I thought haha
@cexy63s3 жыл бұрын
Yeah I was not prepared but so worth it ! 💪🏽
@rleader12 ай бұрын
The puddle lights are not on the bottom of the doors?
@cexy63s2 ай бұрын
@@rleader1 nah, they are in the bottom side of the mirrors but can also be on the bottom side of the door
@Byctvyb2 жыл бұрын
You didn't have to use those little blue things with the wires sticking out?
@erkydi3 жыл бұрын
first time seeing the inside of a car's side mirror XD...
@hassan150 Жыл бұрын
How did you get the puddles to come on when reversing? Did you get that coded in by someone? Thanks
@cexy63s Жыл бұрын
It’s not programmed it’s just briefly on before you pull off or in this case I turned it on and reversed
@ms-ys1wo2 жыл бұрын
So to change the puddle light the camera has to come out to
@cexy63s2 жыл бұрын
Yes
@WaleedTarantino7 ай бұрын
How did you code it to get them to stay on for the camera?
@cexy63s7 ай бұрын
They stay on if you unlock the car
@willharper22253 жыл бұрын
🔥🔥🔥
@987654321392673 жыл бұрын
Are you thinking to get new wheels?
@cexy63s3 жыл бұрын
I like the stock ones I got, I picked those specifically so I didn't need to get after market rims. But I may get a 2nd set in the future for events & things.
@AA_Vics3 жыл бұрын
Do you think there is a difference between more expensive models? Meaning ones that sell for $150
@cexy63s3 жыл бұрын
There could be I’ve seen ones that are not as bulky / thick & will install easier those costed more than what I got. But then there is the aspect of over paying cause these aren’t really expensive lights or cost that much & someone wants to charge a lot
@o0Guns0o2 жыл бұрын
my light is burning out... jesus thats a lot of work for a 2$ light.... (mfg cost of light)