Installing AWT Scales on my Para 3 Lightweight

appliedweapons...
At Traditional Pocket Knives, use my code "DOODYTPK" for $5 off any TPK exclusive!
AND use my code "DOODY10" for 10% off the Ohio River Jack!
www.traditiona...
At White Mountain Knives, use my code "Doody3" for 10% off!
whitemountaink...
At DNK Knives, use my code "doody10" for 10% off!
www.dnkknives....
Blade Ops: bladeops.com/?...
Artisan Cutlery: shareasale.com...
GP Knives: shareasale.com...
Blade HQ: shareasale.com...
Vosteed: shareasale.com...
We/Civivi: shareasale.com...
My Email: [e-mail]
MY MOST USED AND RECOMMENDED GEAR:
Kizer Drop Bear: amzn.to/3q7nPLY
Spyderco Delica Wharncliff: shrsl.com/43507
Streamlight Wedge: amzn.to/3WFxR3g
Ohio River Jacks: www.traditiona...
Leatherman Rebar: amzn.to/3bueYgd
Olight i3T Eos: amzn.to/3Jdm4DX
Fisher Space Pen: amzn.to/3ynuXWu
Lancelot Leather Strap Wallet: edcroundtable....
MY MOST RECOMMENDED BUDGET KNIVES:
CJRB Pyrite: amzn.to/3ODzD2W
CJRB Ekko: amzn.to/3OL1QF8
Rough Ryder Work Knife: amzn.to/3A5DY7x
Ontario RAT 2: shrsl.com/3vw0k
Kubey Momentum: amzn.to/3WDvMVu
Cold Steel Tuff Lite: amzn.to/3ouqNKj

[@GasStationKnives4Ever]

When I need to grip a barrel with pliers I always use a thick piece of rubber band for additional grip and protection.

[@Sal_car88]

I like early morning doodys before work. AWT scales are so awesome!

[@timtitus2532]

My Para 2 (not the lightweight) was a little stiff when I got it. Had to adjust the pivot just a hair, now it runs beautifully. Good video, Doody. Thanks

[@MartinMartin-xm8xs]

Very nice! I have the lightweight and have been on the fence about getting those scales. You just helped me make up my mind. Thanks buddy! Great video

[@cavemandanwilder5597]

FWIW Eric Glesser has said that blades from the lightweight SHOULD work with the G10 scales and vise versa. No guarantee but personally I would feel comfortable trying it. Also, there’s only one washer because the scales are made of nylon, so they made one of the scales really smooth in order to act like a nylon washer. For a bit more detail check out the Para 3 LW tear down video on SpiderCo’s KZbin channel.

[@doodysdaggers]

Gotcha okay that makes sense

[@andyhayward1261]

I love my P3 LW, even with the off center blade and FRN scales it’s a great little blade but the AWT scales really kick it up a notch or two ❤ For anyone looking at getting them I would recommend getting a lynch clip to replace the wire one because the wire clip moves so much that it’ll wear a hole in the cerakote that you can see even while the clip is attached, I can’t understate how ugly it looked lol - so bad that I just ended up buying a new set and put the lynch clip on it from the get go (which I do with all coated aluminium/wire clip knives now) Apart from that they’re fantastic! Also I absolutely love that CTS BD1-N steel so don’t feel like you NEED a super steel. I always intended to get another lightweight in a “better” steel but the BD1-N has grown on me so much that I no longer have any desire to do so

[@doodysdaggers]

Yeah man, even Spydercos more “budget” steels are fucking awesome

[@just_nate_8694]

Nice my Dood! Come on lightweight manix scales...come on lightweight manix scales...come on lightweight...... Come on OG Goat, AWT. When they come they'll be sold out days before I can even make it to the website I'm sure. The para 3 looks badass tho!

[@doodysdaggers]

Haha yeah hurry up AWT!!

[@saltytomato3018]

my spy27 para 3 came with slight lockstick like that too where it clicked when i pushed it in. What fixed it was cleaning it very well with alcohol so there was no lubricant and allowed it to wear in. After about an hour of fidgeting it was perfect. I tried oil and Graphite(separately) first and both only made it worse.

[@meursault1654]

AWT transformed my PM3 lw too. Super snappy and solid. For some reason did more for this model than my PM2.

[@Hungrybird474]

👍 you got a nice snappy one . Ordered some gun metal gray native 5 AWT s last night for the maxamet

[@WeaselJuice]

I’d love that blade too! Could definitely make use of it.

[@Jstarr918]

Awt is the way, I have a set for my mini adamas on the way

[@leafywiggy4427]

This company seems to make pretty nice scales. Probably gonna get some for my native5 lw and later on my para3 lw

[@zexnynex777]

If they can do all these LWs, and a G10 Manix, they can do a Manix LW, ive been waiting for a while now.

[@imiszasz2442]

awt scales remove the liner, and add a 2nd washer to make the build 'symmetric'. this is why they can help with off-centered blades

[@JROTCBALL]

I always wondered if the PM3 could have its scaled replaced.. I installed some blades we love scales on a standard pm3 n kinda want a LW in spy27

[@paullmight42]

I know you said it wasn't a big deal and I'm glad you were able to do this, but I really wish you would have told me there was an issue with it...I would have taken it back(and probably did what you are doing now lol)

[@doodysdaggers]

Nah it’s fine I didn’t mention it because it was still a decent deal for me, I got these great scales and clip and hardware. All good dood 🤘

[@ryandye6242]

Good morning Doods!!! Have been thinking about doing this just not sure if I want to yet. Love all my Pm3. I would have probably said the F word at least 14 times doing this 😂

[@jimluckie8800]

AWT is the bomb 💣 good fitting scales.

[@ryanjordan7268]

Great review!!! Thank you!!!

[@grndayjegi3]

If nobody claims that blade I’ll buy it off of you. I snapped the tip off of my s30v para 3 and ground it down to a stubby tanto but would love to have a full blade again lol.

[@doodysdaggers]

Somebody claimed it but never followed up. Hit me up on IG

[@tommyboy8341]

I want one so bad i just can't afford it the Pm 2 is one of my dream blades for sure

[@S7ORM3X]

Damm i would contact AWT for sure they probably will change your scales, also they sell a full set of para 3 lightweight hardware with the barrel and pivot

[@MikeJ602]

Can’t wait to get mine. Just waiting for the stupid salt to drop.

[@doodysdaggers]

Hurry up Spyderco!!

[@paullmight42]

and yes, AWT includes the additional washer

[@kill3rkitt3ns]

Bought some AWT scales for my Manix after watching your video, they’re fantastic. I did break the tip off my Para 3, not sure if you still have the old blade but I would love to take it off your hands if you do

[@doodysdaggers]

I don’t, sorry mang Glad you’re digging the scales 🤘

[@kathleensmith370]

good idea

[@Locoedc909]

Hey what's up brother how are you doing today? And if you have not yet given the blade to anyone! I will take the blade if you don't mind.. I have just the right spot for it since the blade of my para3 is pretty beat up.. that blade of yours would be perfect... thank you and have a great day.. also let us know how good spy27 is because I thinking about buying one

[@doodysdaggers]

It’s been claimed, sorry!

[@annasoH323]

I keep forgetting to check for Native 5 LW scales. Would definitely change the game there.

[@doodysdaggers]

They’ve got them at AWT! Might be out of stock but they make more fairly often

[@fredp1983]

This might be the way to go rather than Para 3 G10...... Theres only 1 or 2 makers of lightweight scales that I know... and theyre not cheap... in the end its almost the same price as a g10 version... What you reckon is the difference???

[@doodysdaggers]

I think this route ends up being a little more expensive because these scales are about $100. But totally worth it, they feel so good

[@fredp1983]

even though the lightweight para is cheaper by arounf that much too?? and it still works out $100 more? damn@@doodysdaggers

[@jimcchesn]

Has anyone claimed that extra blade? I’d love to do a custom build with it if it’s still up for grabs.

[@doodysdaggers]

Message me on ig

[@jd4edc]

AWT scales ship with the extra washer 👍

[@doodysdaggers]

Okay cool! Thanks bud

[@Jayscott75]

I don’t have a Para 3 but am rocking AWT on my PM2 and they are definitely great scales. I will say though, in your shoes I am pretty sure I’d be sticking with that dark Ti hardware as I think that looked pretty sick even with a satin blade. But it’s your jam and very cool of you to be passing the blade and hw on!🫵🏼👊🏼

[@doodysdaggers]

You might be right I’ll probably be switching back to those ti ones

[@sodathief]

man i had some closed blade play / detent rock it was weird. AWT said, they are not perfect and I had to return

[@doodysdaggers]

Weird! Never heard of that happening. Get a replacement?

[@sodathief]

@@doodysdaggers I kinda just gave up. I might try again some other time

[@Sal_car88]

Doody, I'll take the Ti hardware if it's not claimed yet.

[@whatfreedom7]

Anyone tried adding a second washer to the lightweight? Mine is way off center to the point it’s almost rubbing the blade on the other side. Just wondering if adding a second would center it up better if it would fit.

[@doodysdaggers]

It’s worth a shot !

[@ting280]

Is that the cast iron?

[@DrDrewdude]

Very nice!

[@Warsmith_Honsou]

What color of these scales? Look's like cerakote.

[@doodysdaggers]

They’re like a dark grey or black

[@R.H.bladeNshade]

I would love the hardware you didn’t need if at all possible haha. Been looking for some good hardware that doesn’t cost too much.

[@doodysdaggers]

Someone claimed it already, sorry!

[@Rubes160]

Can you tell me where you got that amazing parts holding tray?!

[@doodysdaggers]

Tinkerforce.com

[@jimmy_Ross]

i would love to have that blade lol

[@doodysdaggers]

Someone already messaged me about it, sorry

[@samturner6455]

Plastic and metal washer don't mix.

[@samturner6455]

Yes AWT sends a washer.

[@garykennedy66]

Would love the hardware if nobody else is interested

[@the_knights_edge]

I'll take the blade if no one wants it lol

[@doodysdaggers]

Someone already messaged me. If he falls through then it’s yours!

[@the_knights_edge]

Hell yea dood thanks

[@isaiahgray3057]

$100 scales on a $120 knife. Lol nope.