Installing BMR subframe connectors in my 1986 Camaro.

In this video I will be installing BMR subframe connectors on my third gen Camaro. I will have to remov the lower control arms, test fit and grind down the paint. then I will weld in the subframe connectors. clean up the welds and apply some paint. Finally I will reinstall the lower control arms and add the BMR sticker.

[@mrphiscal]

A grinder and paint make you the welder you ain’t

[@ForsakenSteel]

Facts

[@coltonbradley4483]

Man thanks for your insight this all new to me what knowledge I have is what we did to my dad's Camaro but we put a big block in it I bought my first project car to build with my kids and any help I can get is always nice

[@ForsakenSteel]

I'm glad you found some value in the video. Good luck with your project!

[@Captgreatvalue]

Hey interesting never ínstales one of those before thanks for the content can’t wait for the next one

[@ForsakenSteel]

This was my first as well. Thanks for watching!

[@Captgreatvalue]

@@ForsakenSteel hey any luck with the trans situation any one give you any ideas to check? Boy I tell ya that 6 speed must be sounding better every day lol 😂

[@millcreekrange]

Great Video Man!! 👍👍

[@ForsakenSteel]

Thank buddy! Hope you are having a great weekend.

[@kevinl.2291]

The eyeball measurements looked perfect on those stickers. I couldn’t agree with you more welding on your back sucks. Great video well see you on the next one ✌️😎👍

[@ForsakenSteel]

Thanks. I have a calibrated eyeball. 😂

[@raydavis168]

Friday sounds great

[@ForsakenSteel]

Thanks for voting Ray.

[@timwindsor03]

Awesome video brother. Thanks for sharing. Keep the content coming. Hope you have an incredible weekend. Much love and RESPECT

[@ForsakenSteel]

Thanks for watching Tim, much love brother. 🤙

[@cmro386]

Good tip to do when doing any welding on a vehicle is to disconnect the battery. You have a good chance in frying the ecm with the battery hooked up.

[@ForsakenSteel]

You are correct 💯

[@cmro386]

Great video! Very helpful. I have the same subframe connectors to install on my 92 Z28.

[@ForsakenSteel]

I've only driven the car once after putting them in but could definitely tell a difference in the cars rigidity.

[@dante04srt]

Ordered some Spohn Sub frame connectors that should be here tomorrow. Going to spend some time this weekend getting them welded in to my Z28. Hopefully the weather isn't as terrible as it looks like it's going to be.

[@ForsakenSteel]

Hopefully the rain holds off. I could tell a difference even just jacking it up and down. I can't remember to get my car finished. I've done so much to it. Let me know how it goes for you.

[@dante04srt]

@@ForsakenSteel so far it has SUCKED. I have 2 layers of 6x6 to get the car up but it's still been very slow going. The Spohn connectors just require so much more welding than the other styles (BMR/UMI) so it's been a real PITA. Just got the driver side done so far and getting ready to call it a night. I'm beat. I should have asked to borrow your cribbing. Lol

[@ForsakenSteel]

I'm sorry to hear it's been such a hassle. If you end up needing these cribs just let me know. We can meet in Maryville somewhere.

[@libertysgarage8411]

Great video. Those look like pretty stout sub frame connectors. Friday vids would be cool. Great way to start the weekend.

[@ForsakenSteel]

Thanks Liberty!

[@thedudeman9629]

Just found your channel, Love what you are are doing brother 👍!! stripped down my 92 RS, making her brand new again. 5.3 swapped it just like you have done. I can appreciate all your hard work, Thank you for sharing it..... Fridays are good

[@ForsakenSteel]

Well welcome aboard. This build has gotten completely out of hand. 😂 Thanks for watching and good luck with your build.

[@thedudeman9629]

hahaha🤣Mine has too, Thanks man👍

[@matthewnelson4298]

I learned everything I know from reading the the books

[@ForsakenSteel]

I wish I knew how to read....show off. 😂 Seriously thanks for watching.

[@donaldhalls2189]

As long as it dose what it's supposed to do, is what matters, all the best to you and your loved ones

[@ForsakenSteel]

I'm with you, if it works it works. Thanks for watching hope you and yours have a great weekend.

[@drainpluggarage]

👍

[@ForsakenSteel]

I just put you and the boys some stickers in the mail. Keep your eyes peeled for them to arrive. Thanks for watching!

[@drainpluggarage]

@@ForsakenSteel ill do the same. Just replenished my stamps. Thanks.

[@stuandkristengreen1000]

I have the BMR connectors as well. I have a Flux core welder too. I was unsure it would hold. After seeing this, I'm going to give it a try.

[@ForsakenSteel]

It really turned out good. I've not really got the car out except for a very short test. It definitely feels tighter. Good luck with your project.

[@briankinnear7461]

Great video. IMO you should paint all those frame components black like the rest of the frame. One consistent look. Look forward to seeing more on the Camaro. Be safe and stay well.

[@ForsakenSteel]

I get that but it is like a surprise when you look under the car. You can't see anything until you get on the ground and look. Then bam what's all that. Thanks for watching Brian!

[@williamschroeder1120]

Hi do you have any carburetor I can have. Mine is going bad. Your car is looking osome God bless you and your family.

[@ForsakenSteel]

Thanks, but no I don't have any carbs at all. I do appreciate you watching. Good luck with your carburetor search.

[@davebarron5939]

This is one of my next items to complete. I have the connectors however, I have to finish my exhaust first, and there will be some adjustments with that because of how i have run my exhaust, via the OEM route. the passengers side gets in the way of the connectors, so I am going to have to get creative. Either Friday or Tuesday for me. Thanks.

[@ForsakenSteel]

It would definitely be tough with exhaust in stock location. Thanks for watching Dave.

[@kenjuicekrajewski9577]

Great video bought for my 91 rs hows the ride? firm or really stiff and pot holes etc im building mine for street strip and country twisties

[@ForsakenSteel]

Well I haven't driven the car much yet. It does seem super solid. I wish I could tell you more about it but I just haven't driven it enough to say. I do appreciate you watching though and good luck with your project.

[@kenjuicekrajewski9577]

@@ForsakenSteel thanks i need them either way even though i do like a long trip once in awhile in between racing so i know its what these cars need take care

[@ForsakenSteel]

I agree no matter what these cars definitely need them.

[@thereluctantgearhead4544]

How long are them 2x4s you used to make your stands? And how high did you stack them? I'm wanting to copy them. Good idea it appears.

[@ForsakenSteel]

Sorry it took me so long to get back with you. I actually have a video on building them. I'm not sure if there are measurements or not but most likely. If not I can get them for you this weekend. Thanks for watching

[@thereluctantgearhead4544]

@@ForsakenSteel Thanks man, I could use a set of those.

[@iR0CZ]

Friday

[@ForsakenSteel]

👍

[@MarkTisdelJr]

Did they give you a different feel after driving?!

[@ForsakenSteel]

I haven't driven it since I installed them. I should be taking it back out in a few days. I'll be sure to include that in the next video. I did nothing that when I took the car off the stands it didn't flex as much as when I put it in on the stands.