Installing Denali D3 Lights and Split SoundbombHorn on 1290 KTM Super Adventure | Step-by-Step Guide

[@johntr1574]

Lots of helpful information, thank you 🤝

[@moto-mate.]

My pleasure 🤝

[@ludmilavreme2578]

Great tips! Thank you 👍

[@moto-mate.]

My pleasure 🤝

[@tomactroop76]

Hi mate. Great demonstration I don't suppose you have any SB horn or light mounts for the new 2023 ADV 890?

[@moto-mate.]

Hi there, Where abouts are you based, if close enough and prepared to allow us to use your bike for measuring up etc then more than happy to adapt these to suit the 890

[@tomactroop76]

@@moto-mate. l would love to help but lm in Australia. I appreciate the offer.

[@moto-mate.]

@@tomactroop76 😂

[@moto-mate.]

@@tomactroop76 The 890 is on the list so stay tuned we'll get to it

[@CoursNatationcom]

Hello, where did you find the binding for the DENALI SoundBomb Split 120dB i have a 1290 S 2021 thanks

[@moto-mate.]

Hi, Do you mean the compressor mount? If yes it is not currently on the website (I am behind on this sorry) but if you contact me ([e-mail]) and give me your address I can confirm the delivered price for you

[@marcv338]

Nice explaining, but for the newer models _ KTM 1290 SUPER DUKE R (EURO 5), bj. 2022 (1290SDR/22) not yet available so it seems.

[@moto-mate.]

No listing for the SuperDuke R only the Super adventure so guessing the CAN bus instruction set is different

[@moto-mate.]

I have just checked the Denali Electronics website and they list the CANsmart controller for "ALL KTM 1290's" If you want to buy one to test, I am happy to refund if it doesn't work

[@garfin2010]

Another little informative video. Keep up the good work. Ride safe. 👍

[@moto-mate.]

Thank you 🤝

[@truepryorities]

Great video!! Do you think the lights will fit on a 1290 SAR 2018? If yes, will they work the same as shown in the video?

[@moto-mate.]

Hi there, The lights will fit in terms of space on the Gen 2 but the lights used on this video won't fit the Gen 2 Super Adventure, if you have engine bars then you can mount the lights on these. Also for the Gen 2 Super Adventure you will need a different CANSmart controller. Drop me an e-mail if you have any questions or we can help in any way.

[@colinsharp1314]

Great job .where are you based

[@moto-mate.]

Hi Colin, Thanks, I have seen your e-mail and will reply directly to that.

[@larrymyers1160]

Very informative, Thanks Would that installation apply for the Soundbomb on a 2014 Ducati Multistrada as well? Any ideas?

[@moto-mate.]

For your bike it would be the Compact soundbomb and NOT the Split soundbomb, there is a dedicated bracket for the 1200 Multistrada so all good there, you will also need a switch relay harness to take the load away from the CANbus which will see the increase current demand as a fault. Drop me an e-mail if you would like to duiscuss further or a quote to supply or supply and fit.

[@haroldasgailius3689]

Very nice job pal 👌

[@moto-mate.]

Thank you 🙏

[@raffaelematteo8888]

Complimenti per il video, però potevi far vedere in maniera piu' dettagliata i colegamenti specie come hai inserito il filo verde sul clacson non si vede nulla, bastava una semplice ripresa dall'alto con una piccola torcia.

[@kwizikle65]

I ordered the D3 lights and sound bomb for my KTM 2022 1290R however the sound bomb does not fit in the frame gap as there is a hug knob for the preload adjustment for the rear shock... I can't find anywhere else to mount it... anyone want a sound bomb? Very frustrated!

[@moto-mate.]

Hi there, that's a real shame, is it a case of needing a spacer? If if cannot fit, please return it to me and I will refund your purchase.

[@robswain5586]

A spacer would mean it would stick out into my leg. It will cost me more than it’s worth to send back from Australia. Perhaps I can get a deal on a “mini”, fitting kit and wiring (if needed).

[@moto-mate.]

@@robswain5586 Hi Rob, Drop me a mail to hello@moto-mate and I can sort something out for you.

[@NeilPerrin-f5d]

So I assume you sell that kit and do you post to Australia?

[@moto-mate.]

Yes, we do. Send me an e-mail with what you need and I will create a bundle package and subject to value shipping will be free of charge

[@NeilPerrin-f5d]

@@moto-mate. Hi mate, thanks for your quick response. Basically I would like to do all of what you have done that’s on the KZbin video to that 2021 1290 s ie the Denali split horn, bracket, front lights and wiring. Thank you very much.🙏😎

[@moto-mate.]

@@NeilPerrin-f5d Hi Neil, send me a quick email to [e-mail] so I have your e-mail address and I'll send you the quote. Regards, Phil

[@pairadice247]

Turn indicators?

[@moto-mate.]

Sorry, what information about the indicators are you looking for?

[@desmoboy]

not enough light when you work

[@moto-mate.]

Agreed but it was a dark, grim day so needed to be inside on that day and have a solution for the future

[@oussbou69800]

support de bonne qualité mais attention pas comptable avec support de valise touratech

[@moto-mate.]

Can you write in english ?

[@clay2pot]

Well ain't technology wonderful? A gazzilion £s for a ridiculously over complicated solution to what used to be a very simple task.

[@moto-mate.]

I get your point, however getting 23 litres of fuel on a bike and make it so agile and handle so well is in part due to the over complicated solution.