INSTALLING FLARES ON MATTS BLOBEYE WRX WAGON

[@bmcghee8908]

Thank you for this I recently got mine and wasn’t sure how to cut the front fenders

[@fa5.problems895]

How long did they take to ship and what is that rubber flare liner called and part number ? I recently ordered and would like them for mine :)

[@CHUCKSNDUNKS]

Ralph Nguyen don’t remember how long processing took but once it shipped within a week. The trim I bought from 4 wheel parts, it’s bushwacker flare trim Part Number: B/W000055-01. If there’s one in your area go and have them order it gets there the next day and you don’t pay shipping.

[@fa5.problems895]

@chunksndunks channel, thank you! Yeah there’s some of those stores around here I’ll go pick some up again thank you!

[@dustinjoel6213]

What are the tire/wheels specs?

[@lconnell53]

Where do you get flares to purchase? I own a 2005 model that I want to install flares

[@ZackCarverWRX]

Do the front and rear flares line up perfect using the 40mm with sedan fenders and 60mm in the rear? I have a wagon with sedan front fenders also. or is one wider than the other (front/Rear)? thanks

[@ogfatdaddy7935]

The front flares are the 40mm and the rear is 60mm👍

[@MR-Deagle]

Hi nice car did the rubber that you put between the flare and body work come as part of kit or did you buy from some where else ? Thanks

[@CHUCKSNDUNKS]

Duran Winson i bought it from 4wheel parts it’s bushwacker flare trims

[@RobertBrolo-l3q]

​@@CHUCKSNDUNKS😮😮😮😮

[@RobertBrolo-l3q]

​@@CHUCKSNDUNKSlike your Subaru on your KZbin videos

[@hughsalkeld465]

what are the specs for those wheels?

[@dogstylez585]

Is that a black and decker drill lmfao o man throwback lol. Nice vid 👍

[@midwestjapan1716]

Where’d u get those fenders from

[@CHUCKSNDUNKS]

Midwest Japan ABW motorsports

[@TheActualCaveman]

Hows that rust cultivating?

[@CHUCKSNDUNKS]

Gravelord Nito what rust ? Lol

[@cameronmetzger4496]

Dude this will help alot

[@Viper3870750]

Hey I have two questions I hope you can answer for me. 1 - Why is it necessary to trim the oem fenders prior to fitting the wide body flares on? I like the look of them but the commitment needed to cut oem parts scares me lol. 2 - Are your headlights the Spec-D brand or just off of ebay? I've heard people complain about fitment issues with them and how they're not a perfect fit. What's your take on them?

[@CHUCKSNDUNKS]

Well the reason for riveted flares is to run bigger wider wheels or really meaty tires. Mounting the flares crates a new space when you cut off the oem fenders a space that the new wheels fill in. But you do have to be committed lol. The front fenders you can replace if you change your mind but replacing the quarter panels is an entirely different challenge. As for the headlights on this blobeye I believe they were just a aftermarket assembly like the spec-d. I’m not a fan of them on my Hawkeye i actually just opened the oem lights and fitted my own halos and light strips to my liking.

[@Viper3870750]

CHUCKSNDUNKS CHANNEL Yeah I get the purpose for the flares but wasn't sure if you could get away without cutting the fender to do so. That scares me lol. I'm familiar with opening up headlights and putting in custom projectors but I don't think I feel like going that route. I've done it on a couple of my motorcycles before. Where'd you get your projectors and mounting brackets to put them in your oem headlight assembly? Do you have pictures &/or video of you doing it?

[@CHUCKSNDUNKS]

Viper3870750 im gonna make a video of it soon because I’m redoing my headlights again but if you see my instagram there’s a pic of them I thing before and after shot @chucksndunks

[@twinturborotary_diecast]

Good idea on wearing the motorcycle helmet to cut the fenders. Lol

[@mileshamel7518]

How much was the kit and which kit was it

[@CHUCKSNDUNKS]

Miles Hamel ABW MOTORSPORT flares and they were about 4-500 I think

[@Hooz_DaS]

those too drill bit that you used, what sized are they

[@sgt-willkillu]

@dasgreen...., For the flares hole; M5 stainless pan head bolts. 5.5mm drill bit. For the car body; M5 internal, flush fit stainless Rivnuts. & 7.2mm drill bit.

[@chickenricesteak541]

Does your car have A/C with front intercooler?

[@CHUCKSNDUNKS]

Truong Nguyen not sure I understand the question but yes the car with the front mount has running A/C

[@cjorcullo5174]

Where did you get the flares

[@CHUCKSNDUNKS]

Cj Orcullo ABW MOTORSPORTS

[@tylerstickrod5550]

Where you get the flares man?

[@CHUCKSNDUNKS]

Tyler Stickrod ABW MOTORSPORTS they offer different styles and sizes

[@Team8k]

Is this the 40mm or 60mm flares?

[@CHUCKSNDUNKS]

AFFLTD the 60mm

[@lindltailor]

“Eyeball it. But careful not to cut too much” lol

[@subieimpreza3211]

Can you sent me a link where can i buy the same Flares Kit pls

[@CHUCKSNDUNKS]

Subie Impreza www.abwmotorsport.co.uk/shop-c1uww

[@subieimpreza3211]

@@CHUCKSNDUNKS Thanks :-*

[@bullsnation5420]

Sexy after months of researching wide body blobeye wagon for inspiration this is posted a month ago🤤👍🏼

[@sebsshenanigans]

yes, moto helmet for protection ahaha, love it :')