Installing heated grips on a DR650

  Рет қаралды 2,581

Jeremy Goertz

Жыл бұрын

Is it possible to install new grips over the stock Susuki DR 650 throttle tubes? Yes, and I've found something that actually worked well at removing the OEM bonded grips.
#dualsport #dr650 #advriders

Пікірлер: 20
@tyee4u
@tyee4u Жыл бұрын
I had read about that throttle tube problem and spent the $12 on a new tube 👍
@revel_arlington
@revel_arlington 3 ай бұрын
Thanks, this has saved me a heap of faffing around, found a motion pro replacement for about 10 bucks and ordered them, that just looks too hard. cheers
@davesober2093
@davesober2093 Жыл бұрын
I like it when you talk a lot in your videos versus a bunch of fast-forward stuff. Like it. Thanks.
@adamb724
@adamb724 9 ай бұрын
You can use hairspray to push on a stubborn grip, it also helps to lock it on.
@davidrivera1727
@davidrivera1727 Жыл бұрын
I like the honest real world mechanical review sometimes on KZbin people show you how easy things are, but this is the way usually things go there’s all these little hangups that turn it into a biatch. Thanks.
@davidbasinski2634
@davidbasinski2634 10 ай бұрын
Nice peak into your project.Anything to extend riding time in the northern latitudes.ty
@davesober2093
@davesober2093 Жыл бұрын
2 sided tape around your bar and then with alcohol or gas as a lube/catalyst, it will slide right on and lock in. A golf grip technique. I will be quiet now.
@jeremygoertz
@jeremygoertz Жыл бұрын
Right on! Thanks for the tip👍
@elitetimberservices
@elitetimberservices Жыл бұрын
I started putting mine on saw the original is one piece with the tube and quit and ordered a new tube for 10$ instead of ruining the original. I'll wait the few days for it to ship.
@Sarj_ent
@Sarj_ent Жыл бұрын
I thought I was crazy while installing my oxford grips. Currently doing that now and found the throttle tube is indeed bonded to the tube. Guess I'll cut them off🤦‍♂️
@Zerotys_ADV
@Zerotys_ADV Жыл бұрын
Good job on the install. That throttle tube almost beat you, lol. How do you fit on the DR? You look like you’re over 6’ tall. Have done any mods for your height. Thanks!
@drfrisker
@drfrisker 6 ай бұрын
What happens when the grip material on the oxford's wear out? Do we buy a replacement set of heaters?
@jeremygoertz
@jeremygoertz 6 ай бұрын
What happens when the tires wear out? Do we buy replacement tires?
@nriyo3
@nriyo3 Жыл бұрын
Jeremy have you ever tried air pressure to free them up?
@jeremygoertz
@jeremygoertz Жыл бұрын
To free up the grips? Yeah I do that in this video on the left one, but the right side I think they actually cast the rubber onto the throttle tube. The air works great for most of them though 👍
@davesober2093
@davesober2093 Жыл бұрын
Are you hiding a clown-donkey under the tape on your hat? By the way, I ain't no clown-donkey.
@jeremygoertz
@jeremygoertz Жыл бұрын
Hahahaha!! Just a local company that had hats for cheap but I don’t necessarily want to advertise for them 😆👍
@josephgeorgeejr7039
@josephgeorgeejr7039 Жыл бұрын
Lift an edge stick a screw driver pull up pour in some alcohol and they slide right off, if that doesn't work, definitely th 60$ lmao
@jeremygoertz
@jeremygoertz Жыл бұрын
Not this one. I’ve changed a lot of grips in my day and this was completely different than any others I’ve seen. If only it were that easy
@MrKidkiller159
@MrKidkiller159 7 ай бұрын
Typical car guy.