Installing HYBRID FLOORING in our FORD TRANSIT VAN

Welcome back to our van build series! Today we're installing Hybrid Panels into our Van for the Flooring - we chose the Floor Select 100% Waterproof Hybrid Panels from Bunnings Australia.
Here’s a list of the products & equipment we used through the process:
3 Boxes x Bunnings hybrid panels: www.bunnings.com.au/floor-select-6mm-2-2m-spotted-gum-hybrid-waterproof-flooring_p0135654?store=7312&gad_source=1&gclid=CjwKCAjwm_SzBhAsEiwAXE2Cv_pjPP7_dJXhAjgJMSdQPGIeN6ePMTtmjfDWy4TSsEv0qZDc9bhd_hoCjKYQAvD_BwE&gclsrc=aw.ds
1L of Waterproof Paint: www.bunnings.com.au/crommelin-1l-flat-aquablock-waterproof-primer-undercoat-1l_p1560469
3 Lengths x 1metre Bronze Aluminium Trim: www.bunnings.com.au/metal-mate-20-x-20-x-1-5mm-1m-bronze-aluminium-angle_p1138068
Orbital Sander with 80 grit & 120 grit sand paper
Angle Grinder
Ruler
Stanley Knife
Tape Measure
Jigsaw
Rubber Mallet
Right Angle
If you watched our subfloor installation video, you'd know we have already:
- Stripped the van empty and gave it a deep clean.
- Insulated underneath the subfloor.
- Built a sturdy subfloor to prepare for the flooring.
In this video, we take you through each step of the hybrid flooring installation:
1. Sanding the Subfloor: We started by sanding down the subfloor to ensure a 100% level surface.
2. Waterproofing: We applied two layers of waterproof paint to protect the floor from moisture.
3.Choosing Flooring Panels: We made a trip to Bunnings to pick out our favourite hybrid flooring panels.
4. Cutting and Connecting Panels: Back at the van, we connected each panel, leaving a 10mm gap from all edges and using a rubber mallet to secure them.
5. Custom Cuts: We used a Stanley knife and jigsaw to cut the panels to fit around the curves and shapes of the van.
6. Tackling the Step Area: Jess cut bronze coloured metal trims to fit perfectly around the step area.
7.Final Touches: We finished by sanding the back of the van with 120 grit paper for a smooth, curved finish.
The total cost for this transformation was UNDER $300!! ($298) and we couldn’t be happier with the results. Our van is starting to feel like a real home!
(We also had zero panels left at the completion of the floor! so 3 boxes was the PERFECT FIT for our Ford Transit van Floor + door step)
What do you think of our progress so far? Leave a comment below
Please like & subscribe if you found any value in this video & for more updates on our van build journey! - it would be much appreciated x
Follow us on Instagram & TikTok: @ausbackpacker - for daily updates and behind-the-scenes content. I'm also hosting a giveaway over on my instagram page (BOOM3) - announced on Monday 1st July 2024!
FOLLOW US ON SOCIALS:
IG: ausbackpacker
jesso.photo
domandjesso
TikTok: www.tiktok.com/@ausbackpacker
#vanbuild #diy #fordtransitvanbuild #hybridflooring #floorinstallation #vanlife #vanconversion #vanlifeaustralia #diyprojects

[@Story_Scape_Official]

Wow great video guys, keep up the great work!

[@domandjesso]

Thanks Harry! Appreciate the support, we will do 🎉