Installing K tuned Engine harness on my K24!

Thank you for tuning in! I wanna hear you’re thoughts, comment below and tell me what you think! Like, comment, subscribe and give the video a thumbs up it would be greatly appreciated!
Follow my social media:
Instagram: @spvce___
Twitter: @spvce___
#cars #jdm #function #form #stance #vlog #unboxing #car #carparts #static #speed #fast #f22 #f23 #j30 #j32 #j35 #k24 #k20 #b18 #b20 #b16 #dseries #bseries #hseries #fseries #kseries #jseries #carshows #shows #budget

[@jyt3408]

"Shift" plug is for reverse lock out solenoid. Only needed if you are running 6 speed transmission.

[@Otjmore]

This helped me with my k swap harness not k tuned but watching the plug in. Thank you.

[@BryanBeast13]

i just noticed this was on a 94-97 accord. needed this for my 93

[@nelsonjimenez1483]

Can wait to see that car running!!!👍🏽👍🏽👍🏽

[@space3748]

Nelson Jimenez coming soon brother thank you for watching this build unfold a video at a time 🙏🏼

[@bobbydelamar606]

What oil pressure sensor and coolant temp sensor are you using? I noticed there 1 wire connector...?

[@antwyngascar]

Thank now I'm do my k24 tomorrow 🙌

[@Queensraces]

Hows the ktuned wire harness kit holding up any problems ???

[@shawngavigan8685]

the only part i didnt like was no solder on the knock sensor plug, trash the electrical tape and use heat shrink

[@space3748]

shawn gavigan well noted brother thank you

[@RLegooo]

That alternator is not a ground lol it goes to the fuse box

[@mikescj2aownergarage488]

What belt are you using? I want to run the a/c but delete power steering.

[@matthewhawkinson8554]

you said map while hooking up the plug to the tps and tps when you hooked up the map.....id check those just to make sure

[@space3748]

Matthew Hawkinson will definitely check that out next time im working on the car thank you 🙏🏼

[@matthewhawkinson8554]

@@space3748 no problem!

[@smokingdankerrday]

if you look at the video you can see he plugged them in correctly

[@Queensraces]

nice video im stuck btwn gtt the ktuned wir harness and the wireworx for my k24. so many diff people say keep it oem wire..but idk?any opinion on the 2companys

[@space3748]

QUEENS_RACES rywire makes a great product they have great customer service and can even help you trouble shoot your wiring if you are having problems over the phone, i got a k-tuned which is a tucked replica of the oem harness only issue i have is the coolant temp sensor to read the gauge

[@Queensraces]

@@space3748 ty bro i appreciate the info. i just hit up kseries and they mention rywire also . most like gonna ge that 1 ty for the info

[@space3748]

No problem brother glad i was able to help out 🙏🏼

[@kamereno]

What’s wrong with butt connectors? I hate those electric tape wire jobs

[@space3748]

kamereno nothing is wrong with it tbh, i did my wiring that way in case i have to check for shortages etc just so i dont have to short the wire to take the butt connectors off, in theory its better to do butt connectors because its constant connection so you are not wrong

[@kamereno]

Space I prefer to solder but it’s on you if you don’t care about good connection it’s only a 12v system. But for me butt connected at least. Electrical tape jobs like that are ghetto although works for temporary.

[@andrewlicata4633]

Is the factory k24 harness not compatible with the rywire conversion harness? Going to pick up my k24a2 this week. Trying to figure out all my wiring... before i start droppin hundos on shit I dont need. lol Still searching for a damn trans -.- And it looks like that k tuned harness is going to be another like 800 or so... but if its what she needs. its what she needs...

[@space3748]

To make a long story short no brother lol, all sub harness are made for k20a2 6 speed engine harness. You dont have to drop 800 like i did, i wanted this look, do some shopping online and figure out who is cheaper and i think its rywire.

[@andrewlicata4633]

​@@space3748 Picking up engine Tomorrow!!!!!!! So pumped!!! Can't find a 6 speed no where tho.... so pretty sure I'm going to run the same trans as you but add lsd.

[@irvsmadhouse]

Did you swap the crank sensor or the plug on the harness?

[@space3748]

Irvin Dorsey i swapped the k24 one to a k20 type s crank position sensor

[@K24Reggie]

I have a problem where my ecu is not turning on. everything is connected my sub harness and my engine harness all connected but my ecu still doesn’t turn on.

[@401kid6]

You have to add a ground to your main relay under your dash. You’ll see on your main relay there are two black wires in a pin. Add a wire into it and ground it somewhere. Boom your fuel pump relay should prime, check engine light should work and your ECU should turn on.

[@alexreyes5626]

How did you wire up your speed sensor

[@mikescj2aownergarage488]

What harness are you using beside the k-tune harness?

[@space3748]

Mike’s Expierience im using a Ry-Wire conversion harness

[@mikescj2aownergarage488]

@@space3748 Thanks bro🙏🏼

[@JesusFlores-dg7gb]

Bien echo

[@Serpentis666]

waiting for my ktuned harness to show up...hope it works well.

[@space3748]

Abstrahere De Vanitate it will brother, just remember what i said in the video and you will be golden

[@Serpentis666]

Space did you get the one with the power wire or no power wire?

[@space3748]

Abstrahere De Vanitate with power wire

[@Serpentis666]

Space I realized yesterday that i ordered the one without it on accident... I sent them a message right away to see if it was shipped yet and if I could exchange it... it’s my 3rd k swap eg, but I never did the wiring before and this time i have no help! Lol

[@space3748]

Abstrahere De Vanitate honestly its no different i think, its like a built in charge harness kind of

[@PaChiLa_Leader]

vid got TPS and MAP plugs reverse~~

[@space3748]

Law C yea i realized that the day i did it, following video i corrected it thanks man

[@Southsaccccc]

Is this the budget harness?

[@space3748]

South StocKton no this is the K-Tuned harness the budget harness is from rywire if im not mistaken

[@Southsaccccc]

Space oh I see. You’re not running a alternator relocate correct?

[@Southsaccccc]

Space and also what year tranny was u using? I heard 04 and 06 is a bit diff cause speed sensor

[@space3748]

South StocKton i am bro i just made my own charge harness, im using a 05 , 5 speed accord transmission if you are doing a k swap in a accord and using hasport mounts you cant use a rsx transmission on a itr, accord and tsx trans

[@Southsaccccc]

Space I see. Wen is this car going for a tune? Lol

[@rsxboys5393]

U gott have 6 speed transmission to use that plug

[@jasonramirez545]

The shft? I ask cause I have the same confusion about it

[@CarolineAldrich]

784 Adrian Harbor

[@masonscott2341]

bro twisting wires and taping them is fucked!!!! lmao atleast heat shrink it so it cant move as easy

[@mikescj2aownergarage488]

What tranny you running?

[@VinnyDeez-]

Whats the part number on that lower hose? I seen that the upper one was 9968 napa# im not trying to spend 200 bucks on silicone hoses 🥲

[@nolanritter641]

Still need a pn? I have one for a stock civic radiator i'll get it if you need

[@VinnyDeez-]

@@nolanritter641 im oky now i bought some other hoses and made it work thanks 🤝