Installing M3 front bumper and side skirts (E36 S54 SWAP)

[@ravisidhu1667]

Wow colour match up is good. Your right about the fixing. Got to work with what you have (plus Mfg only needs the parts to stay on till it leave the show room or special tool required)

[@jofojo8562]

«А сердцу к сердцу» , классная музыка 20:50

[@carsinruin6102]

You had me at S54 swap. Subscribed 👍

[@DailyDrivenE36]

Samuel Hewson well i don’t know if you’ve seen my other videos but it is s54 swapped e36 😁

[@mopedboys6669]

Love the bmw keep doing what your doing mate

[@182-media]

If only I lived where you can do almost whatever to a car. Norway is super strict and super expensive when it comes to engine swaps

[@babylane6028]

Move lol

[@RbNetEngr]

Why did you drill holes through the front bumper trim strips and install those big round fasteners?

[@DailyDrivenE36]

That’s a quick release, you know how you have to take bunch of screws and clips to take bumper off? so no I just press those “big round fasteners” and bumper is off 🤷🏻‍♂️

[@nikaubilava3213]

love bmw e36 love

[@juodaodisdiedukas]

Which 3m glue did you use for the sideskirts?

[@sergeygr]

Nice one! But you had to put a gasket between threshold and side skirt (on top of inner edge).

[@DailyDrivenE36]

Fankie u can but u don’t have to, i think it looks cleaner without rubber molding but i did use same glue to creat black line between the car and side skirt and I think it looks a lot cleaner, but it’s just me.... Thanks for the comment 👍

[@AnthonyLivesTwice]

What did you use for the sealant?

[@jesusmalonso7179]

Hello man, your car is awesome! I was wondering where you bought the cls type trunk spoiler. Thank u

[@DailyDrivenE36]

Thank you 🙏, i made it

[@gernnylornsxlor8603]

Nice car. Whats kit rear spat or rear diffuser you put on. I like, thinking doing the same thing for my car. Thanks

[@DailyDrivenE36]

Gernnylornsx Lor thanks, i made it like 2 years ago from aluminum laying around my house 😁

[@andrejafercek3173]

So... It is possible to change front grill without removing the lights???

[@DailyDrivenE36]

U r talking about the nose panel grills right? U can, just take top plastic cover off thats under the hood and u can get to the grill

[@andrejafercek3173]

@@DailyDrivenE36 yeah... Thank you very much!!! You just made my day, cause i was so mad about removing lights 😂😂😂😂😂😂. Thanks for video. 👆

[@RijiGIO]

კარგი მიდგომაა მომეწონა .)

[@juanfelipecordero9465]

Hello, in your video I could see that you put an iron under the bumper, can you tell me how you did it or where did you buy it?

[@DailyDrivenE36]

I got used one from the guy but u can get one online or DYI it, ez to make

[@jkprod.4314]

Is there a specific name for it ?

[@lucmarinovich6815]

Hey I was just wondering what the little black lip is you connected underneath the front bumper and where to buy it?

[@DailyDrivenE36]

Thats oem lip for m3 bumper

[@lucmarinovich6815]

Do you know where the best place to buy them is?

[@DailyDrivenE36]

@@lucmarinovich6815 aaaa... u can get them on ebay but get oem (has better fitment), are u local? I have one u can have it for free, might need to be painted but its oem

[@lucmarinovich6815]

@@DailyDrivenE36 oh yea that would be good but unfortunately I live in New Zealand

[@ItalianMafioso344]

My 1995 bmw 325is also did not come predrilled for sideskirts. How did you figure out where to drill the holes so that the side skirts would mount up properly? Nice video keep it up man.

[@DailyDrivenE36]

Warrior thanks, my 95 m3 did have oe side skirts so... 🤨 i started drilling but end-up using 3m window glue but i did drill the bottom, still holding good so....

[@sahroiromah1611]

so nice i love e36

[@gaijin.3644]

can you pls tell me what 3m adhesive you used btw good video

[@DailyDrivenE36]

Double sided 3m tape, get 3m tho... Works %100

[@benparsons99]

Were the skirts genuine bmw? I bought some replica ones and the clips don’t line up so will probs have to do something similar to this

[@DailyDrivenE36]

Mines are OEM, I don't know about replica skirts but on OE skirts you can slide clips left or right to line up with the halls

[@lovelrivas6999]

Hey man what paint color is your e36

[@nanatufuor4820]

How do I get some to buy , the kit I mean

[@frogking64]

Where did you get the sideskirts I've been looking for some myself

[@DailyDrivenE36]

From my donor car, 95 m3

[@ArapBayraminOglu]

How do I get the kit to blend in well with the color of a black e36 from 97? I’m afraid the kit is going to look to ‘new’ compared to the car’s paintjob making it ugly in overall sense.

[@DailyDrivenE36]

Can Oz If you are doing just bumpers and side skirts you don't have to blend the color as long as cars color looks good but if you are doing just door or fender or quoter panel than you might especially on 97, it will still look new but with time (2/3) weeks it will look ok, i had paint shop mix color by my car and not color code because its old car (color)

[@ArapBayraminOglu]

@@DailyDrivenE36 so it needs to be painted as well? They don't come in the desired color? Good to know! Thanks

[@absteven]

The AC control module unit may have broken, try to check on that.

[@DailyDrivenE36]

absteven i did, i have extra ac controller from my old m3 and i got one from pick and pull, still not working 😕, i got wire diagram from old data so will c if i can fined the problem

[@absteven]

@@DailyDrivenE36 I mean this .www.google.com/search?q=e36+%E5%86%B7%E6%B0%A3%E9%9B%BB%E8%85%A6&client=ms-android-asus-tpin&prmd=inv&sxsrf=ACYBGNSjHDTMi-fJWZ4bJv56O7uABVabyg:1577587399134&source=lnms&tbm=isch&sa=X&ved=2ahUKEwiW2puE69nmAhVkL6YKHdiXBZ4Q_AUoAXoECAsQAQ&biw=320&bih=541#imgrc=DD-ZC4yaSL1QEM

[@carterhoopss]

where did you get the kit?

[@DailyDrivenE36]

From my parts car

[@vakimovb]

Мне показалось или играла русская музыка на заднем плане?) Что-то из машины времени?

[@DailyDrivenE36]

Владимир Акимов Нет не показалось 😁💪

[@АлександрЕлисеев-ь5м]

Я на первых минутах раскусил , что Русский , )))) акцент выдал))). Тачка супер 👍🏻👍🏻👍🏻

[@carsinruin6102]

Where did you get the skirts and bumper? Thanks.

[@DailyDrivenE36]

Samuel Hewson skirts from craislist and bumper i got for $20 from one guy at my work, but if u r looking for m3 bumper i would get one from ebay, its not OE but still good bumper and comes with everything

[@milhailmartinez2224]

What color match did you use??

[@DailyDrivenE36]

Fuel door, paint shop mixed it by matching it to fuel door

[@mrnajee1]

your wheels are then not the same with or tires are not the same even if they say they are. Pieces closing the gaps between the wheel and hub are called "hud centric rings" just FYI

[@Magicstockton]

Subbed

[@Magicstockton]

How do you assemble the mesh grille piece? I have no idea how to get it to stay on. There’s no screw holes.

[@DailyDrivenE36]

Magicstockton u talking about the bumper grill right? Grill has halls and bumper has... its like pointy plastic screws (part of the bumper) and you use spacial washers but those things brake ez so your bumper might not have anymore especially if its used

[@Magicstockton]

Daily Driven E36 Oooohh. That’s those small washer with the teeth in them? Yeah, man, I just got a $140 eBay one and I’m assembling it. So basically I’m going to have to JB weld it... much appreciated. I subbed for a reason. 🏆

[@theterminfrator]

Hey i live in Belgium so it's definitly going to rust if i drill holes like that, how can i prevent that from happening

[@DailyDrivenE36]

theterminfrator There is a bunch of different sealer’s and paint that you can use from preventing it from rust

[@christianborresen9]

cant go wrong with cip ties

[@andrecasian4262]

"wow there you go, magic... nahhh " 9:03

[@vakimovb]

Привет, надо ли при установке климата перешивать комплектацию через инпу? Should i reflash the ecu to work with climate control?

[@DailyDrivenE36]

Владимир Акимов my AC still not working so i don’t know... its all connected and i have freon in it but... technically you shouldn’t have to program but i was told your idle will be off

[@rbrs1741]

Where did you get the parts from ?

[@DailyDrivenE36]

Ebay, pick and pull, craigs... lol

[@nyanthony3]

What kind of glue did you use?

[@DailyDrivenE36]

Anthony Pinero 3m for the windshield

[@imSchwaggy]

what rear diffuser is that?

[@DailyDrivenE36]

im Schwaggy home made lol 😆

[@abrambam3331]

My obd2 had clips for the side skirts but I got a 94 now so i guess this will not require clips lol

[@Magicstockton]

🏆

[@luckyboi1196]

What is the size of your tires?

[@DailyDrivenE36]

Lucky Boi11 215/45/17 front, i used 245/45/17 in the rear b4 but its same as front now 215/45/17 with 30mm spacers in the back

[@luckyboi1196]

So the 215/45/17 are look stretched? Cause i have the same style 5 as you

[@DailyDrivenE36]

Lucky Boi11 u can c difference in tires in this video and how stretched they r plus if u have m3 ull have to get spacers or grind front brake caliper plus my front fenders are rolled / rears have fender flares so i dont know if they fit without rolling your fenders

[@DailyDrivenE36]

Lucky Boi11 i have michelins upfront and pirellis in the rear same size 215/45/17 but michelins look stretched (not to bad) and pirellis dont but at the same time if i use pirellis upfront they will rub my fender even tho they are rolled so.... i can send you pic if you have instagram if you want

[@luckyboi1196]

Wow thankyou! But i have a E39, my IG is luckyjohnsuu

[@NERSISYANNERSISYANN-z3y]

💞💞💞💞💞💞💞💞💞

[@AlexThunderouse]

where can i get this difusor ?

[@DailyDrivenE36]

PierreCardiny rear bumper diffuser? I made it 😁

[@AlexThunderouse]

@@DailyDrivenE36 nice one :D can you share measurements ?

[@DailyDrivenE36]

PierreCardiny there was no measuring tape involved in it LOL I made it all by just eyeballing it, i did talk about it in one of my videos how i made it but don’t remember in which one lol

[@AlexThunderouse]

@@DailyDrivenE36 understand :) thanks for replay, i ll find it.

[@DailyDrivenE36]

PierreCardiny i will be making new one, don’t know how soon but i wanna make one so if i take bumper off diffuser will stay on the car 😁

[@wansirpunkuitm]

what the rim jj btw?

[@DailyDrivenE36]

safwan jamian im not good with rim sizes and all that but i think what you are looking for is (8jx17h2) right?

[@wansirpunkuitm]

thanks...what tire you use before and after?i also have same situation , different tires stretch differently

[@DailyDrivenE36]

safwan jamian 215/45/17 front and 245/45/17 rear

[@adellisdevelopmen6593]

What the fcuk you do to the rear bumper 😂😷

[@floyd2993]

name this rims is so 😻

[@sicariodave]

Колхоз

[@DailyDrivenE36]

🤣🤣🤣🤣 i wanna c your car, колхоз 🤨