INSTALLING NEW HYDRAULIC BRAKES + MAXXIS HOOKWORMS ON MY SEBIKES DUB RIPPER!

LINK TO HYDRAULIC BRAKES-
www.ebay.com/i...
Link to Tires- www.ebay.com/i...
THANKS FOR WATCHING GIVE THIS VIDEO A LIKE! AND SUBSCRIBE IF YOU ARE NEW TO THE CHANNEL
➢USE CODE “STEEEZY” WHEN PURCHASING A SEBIKE FROM RIDEOUT SUPPLY
rideoutsupply.com
➢Instagram: @steeezyfilmz
( / steeezyapparel )
➢SUBSCRIBE: / @steeezyfilmz
#ROADTO100K

[@JimP419]

Props for getting the hose cut to length too many builds with excess hose coiled around the stem, gives the bike a unfinished look.

[@TC-zi2yp]

Its literally a 5 minute process that you can pull off without bleeding.

[@henrycoronado3030]

When installing new brakes on old rotors, you need to clean the rotors thoroughly with alcohol, so the new brake pads don't get contaminated. Once that's done, then you must bed in the new pads to the rotors, so the brakes won't feel mushy.

[@SteeezyFilmz]

Appreciate the advice Henry

[@henrycoronado3030]

@@SteeezyFilmz Anytime!

[@six0sick]

What's up steeezy? This is Harry from Kentucky. And like a few others have said... sandpaper your pads, oh get the metallic ones first off, but sandpaper your pads in a circular motion and then lightly skuff up the rotors as well. Then isopropyl alcohol to them both. Let them dry while you get dressed, and then do your bed in process of hitting a hill, engage brakes, let go, engage again, let go. A few times and they should start biting.

[@SteeezyFilmz]

Appreciate the advice Harry

[@steadymobbin79]

I run Shimano deore xt with stock Tektro rotor on my duro and they catch good

[@bradleygoff1]

Was wondering where you’ve been. Love the content!

[@SteeezyFilmz]

I’m back I took a lil break but I’m back😈

[@broderickmoore7322]

Everybody who gets a new bike says the same thing. I dont wanna fall. I'm not gone wheelie until I break my pads in, but still end up throwin it and fallin or almost fallin🤣🤣🤣

[@JSuaveM3]

Yurrrr

[@og.reddyy]

It ain't ez being STEEEZZZZYYYYY 🔥🔥🔥

[@ramsgotwork]

Hey steezy I just recently traded my throne da goon for a custom big ripper with a disc brake conversion kit sinilar to yours, would I be able to put the fat tires on it the speedster ones?

[@anthonypinedo8113]

I got a question when you put the hook worms did you have to change out the tube and is the tire a 27.5 because I’m thinking about putting maxxies on my beastmode.

[@cwgnico6798]

fire

[@driftingpsycho86]

Try the 180mm rotor might need to use a different brake caliper mount

[@bl_jacobs]

Keep it up

[@rowdysworld22]

Think I’m bout to order these for my Maniacc

[@JTrowser]

You sound FED UP with that Dub!!

[@SteeezyFilmz]

I am fed up

[@dawayneakpan1816]

Lightly sand the pads and clean the rotor and you won't have that problem anymore

[@dawayneakpan1816]

With that mesh sand paper I forgot the name of it

[@tutufromdafutu5970]

W vid

[@impala6524]

Looks good

[@_ASPETICPC]

I have a savage flyer with deore breaks they are fine

[@orlandoreyes5020]

🔥🔥🔥🔥🔥

[@captaincarn3754]

I use mt200 brakes with maxxis on a mafia booma

[@SteeezyFilmz]

good choice!

[@nolanchai8137]

sand the rotor n the pads w i think 400 did it to my jawn shits grab like none, clean it w alcohol after

[@SteeezyFilmz]

💯

[@frankflygel3089]

Good

[@benjaminfrank_]

So when running the break cables through the frame is the frame completely hollow making it hard to pull cable or is there like a little tunnel in the frame to where you just stick the cables in the hole and it come out the other hole ?

[@SteeezyFilmz]

Yea pretty much

[@orlandoreyes5020]

What cranks are you using with your ros sprocket ⚙️

[@SteeezyFilmz]

Some used gt cranks

[@orlandoreyes5020]

@@SteeezyFilmz thanks a lot my brotha I appreciate it I picked up a dub ripper last weekend in broward and I found the gearing a little bit hard especially that I’m just practicing my wheelies

[@orlandoreyes5020]

@@SteeezyFilmz your videos helped me a lot thank you be safe

[@tutufromdafutu5970]

i got you ima watch the ad's

[@SteeezyFilmz]

Real one

[@pyro_icee]

❤

[@cwgnico6798]

go about 10 mph and start slowing down gradually and they will feel better

[@TC-zi2yp]

What changed? I thought you previously hated the hookworms.

[@SteeezyFilmz]

I became a man

[@driftingpsycho86]

By parts on Jenson USA

[@MMM_12345_]

Hey steeey , I have a big ripper and I have two brake options , the Magura hs33 or the shimano deore xt , Which one do you recommend

[@MMM_12345_]

love the vids btw , really helped me get into this hobby

[@SteeezyFilmz]

Hs33

[@MMM_12345_]

Thank you so much

[@MMM_12345_]

Also what size did you put on your dblocks, 2 Hebel or 4

[@steadymobbin79]

Hs33… deore xt is a disk brake

[@Remycutzz5380]

yo steezy my hydraulic brakes keep rubbing even if i adjust it i took a look at it and both of the pads are touching could it be too tight if so how do i fix it its not causing a problem i could still ride normaly i just wanna fix it (edit) im new to disc brakes cuz i got a mafia but i used to have a rim brake bike

[@SteeezyFilmz]

bike shop

[@marcusduong9715]

Need super bigs and a shimano rotor now steez then the dub would be sharp

[@SteeezyFilmz]

I don’t like super big honkins

[@marcusduong9715]

@@SteeezyFilmz gotchu gotchu but yeah I recommend the shimano rotor because they’re actually more sharp and It be dope to throw on some mtx33 hoops on the dub but that’s how I’ll build it if I had one

[@driftingpsycho86]

those rotors suck I suggest going to a Shimano rotors.

[@SteeezyFilmz]

Appreciate that Benny

[@OGPAPERBOY77]

Prolly the pads

[@beperformance256]

What free wheel do you have on your dub ripper?

[@SteeezyFilmz]

Not a free wheel it’s a hub

[@itsblack9324]

please make video how to wheelie please please

[@driftingpsycho86]

I do not like the tektro brakes horrible disc brake.

[@six0sick]

They slipped on me and made me tear my patella tendon. Needed surgery and everything. Fuck them tektros! I have Shimano xt on my Duro but CLARKS M2 hydros on my fast ripper. I'll be putting clarks m2 on every bike I get from now on.

[@SteeezyFilmz]

Oof hope you recovered well from that

[@Noplug305]

Yo

[@tinofilmz4360]

bike is looking wet 😭🅿️

[@FLE_toby]

pull up

[@tinofilmz4360]

sometimes they will sometimes it won’t, my fast actually may have the same thing as your w the hub thing, my “rotor” to bent even tho I change out 3 times 🥲

[@angelostroska4274]

Just get a new se monster ripper steezy

[@SteeezyFilmz]

Yessir post some KZbin videos on it

[@doctorwells1358]

I was told to stick with the same brand because the rotors may have different widths

[@SteeezyFilmz]

💯

[@huntuhhh]

Just put the shimano SLX 7120 on my cult devotion… been having problems with all my hydros having air in the line.. or so I thought we recently found out it was the oil I was running in the lines causing them to feel spongey

[@steadymobbin79]

Take em to a shop to bleed