Installing Pre-Cut Tint Kits

Recommended Tint and Tools
Carbon Window Film:
Carbon PreCut Kits: lexen.co/fullkit

[@RichardRLeal]

Cost to tint a window $20 for tint $10 for squeegee $2000 water bill

[@Den3productions]

Where do you live California!?

[@DavidG6935]

LOL

[@baseball-4ever]

@@Den3productions Mars

[@KeepItSimcoe]

😂

[@jamessamen3933]

Lol

[@bumble_rumbles]

I like all the experts poking fun at the account of water used. I tried to install precut today. It truly takes a ton of solution. My driver door ended up with a couple creases and those well known little bubbles that f'd it up

[@TheMotocross4life]

dude are you me? just tried it today too, and learned you need a-lot of solution! messed up one tint going to try it tmr on the others and hopefully all goes well

[@kj4beats]

So how many gallons of water will I be putting into my door panel?

[@hontoniarigato7956]

haha I know right every video the door panel is getting jizzed on like no other, you would think its bad for the door but I guess its not.

[@raiderman28]

That's hilarious. he does use alot of water, but i am sure its clean, because he flushes the dirt out of there. also most guys don't use a tank with a sprayer like he does, most use a spray bottle, alot less water.

[@LTDanno360mods]

kj4beats. dont ever drive in the rain?

[@1Deejay7]

There are drain vents in every door.

[@shaniatwain1995]

Not with the fucking doors open

[@johnfarrell2680]

I dont think your using enough water mate by the time your finished the garage will be flooded

[@tbirdpimp07]

can I just park the car in a swimming pool to save time and water?

[@Justin-wf5nr]

@@john1120 lol. That made my day. Hahaha

[@john1120]

@@Justin-wf5nr thx😀👍

[@john1120]

@@BradleySevenfold it's dead now..

[@toristarkey5229]

😂😂😂😂😂

[@cjmaserati648]

Bruh 🤣🤣🤣🤣

[@msmegification]

Watching this video convinced me beyond the shadow of a doubt that's this job needs to be left to a professional.

[@Lorilee369]

Wow! I am glad I watched this BEFORE attempting a blind install. Thank you for this!! 🤠

[@relic4989ify]

Would Niagara Falls be enough water to get the tint on properly or

[@skismosis]

i fouled up my first try on the back of a '79 chevy window because i did not watch you do this first lol , you make it look simple , great job , im gonna try it again and get it right this time. thanks alot.

[@davtrott16]

What did you do wrong?

[@rebellemming84]

Thank you for sharing your knowledge! Wish I had watched your video before ordering my kits because I would like to support someone willing to teach. However, there will likely be another tint project, so I’m saving the video and link :)

[@LuxuriousDreamer-hk4mq]

Hey man I have a submarine you can tint the windows on You'll have plenty of water 😊😊😊

[@jiggajigjones8210]

LuxuriousDreamer 2017 haha

[@keithpeters2381]

got one of your kits and it looked great and was easy to install. will post pics this weekend.

[@TWAN330]

You’ll only need these 3 things.. ( then proceeds to name off about 10 things ) 😂 thanks bud

[@daffyduckphd]

lol there are still observants in the universe, with PhD’s in Sarcasm. Bravo or was that Skepticism.

[@josetamayo3617]

Tf

[@ort619]

@@daffyduckphd Touché

[@cdsouthern]

Conquistador? Platinum easy reach? Yellow turbo? Who comes up with these ridiculous names for a squeegee?

[@bc9796]

Chris Southern 😂i was thinkin the same shit

[@jiggajigjones8210]

Chris Southern squeegee enthusiasts. They love fusion handles.

[@istraightupkill]

You got the turbo 5000 with the flex polygrip? Nah I just got my credit card.

[@BlueFinch]

@@keyboardwarrior2812 username DEFINITELY checks out. lol

[@benthomas318]

Keyboard Warrior so bold.... behind your keyboard

[@waterfall836]

Great job. Thank you for explaining how to get the job done.

[@surroundedbyus]

Matt very awesome video!! Its so awesome you share this with the layman.

[@bigdaddy4429]

I’m getting flood insurance before I get my windows tinted

[@ariasjose21]

Agreed I get it is easy to do the pre-cut but, Holy crap that's a lot of water. That bag covers the door outside panel only, but tons of water is going inside of the door where all the electrical are.

[@TheIamdevin]

Jose Arias your technically wrong,the electrical is usually between a waterproof clear plastic layer or even a hard plastic layer on newer vehicles and theres little to no wiring between that layer and the metal door panel where the water is going. Doors have drain holes at the bottom so its not like the doors fill up and have water in them forever

[@thesmokinogre]

TheIamdevin Thaaats right

[@smokessauce]

LMFAO!

[@viscrilla917]

Lol

[@trapbird3963]

Are we all just going to ignore how he said "hey tint-ernet"

[@omghalo3rocks]

Lmfao

[@placepages8071]

I'll never forget it 😮

[@ILoveBoxingHako]

🤣🤣🤣

[@hans2five]

What a strange thing to say on.......film. 😂 lol

[@whatitisnt.]

@@hans2five 😂😂😂

[@fedegarcia1985]

Muy bueno lo tuyo!! Siempre veo tus videos y aprendo este trabajo, yo estoy empezando con lo mismo y te tengo como referente. Fede desde Argentina.

[@Sunnylynn77]

Thanks for sharing, I got a good ideal on how to do this......I APPRECIATE THE KNOWLEGE, I have more confidence on doing it, then just reading the instructions.

[@wizzdumb_610]

Did you try it yet? I'm wondering if it's really as easy as it looks or if it's just like every other KZbin tutorial where they make it look like it's no problem but then as soon as you try it yourself you start having suicidal thoughts due to the stress it comes with.

[@quattro4944]

Great that you sharing how to do it . Some just keep that as secret like NASA , even if you know how to do it you still need experience to do it properly . Once again Top Man

[@Jbell440]

Thank you for the step by step detailed instructions! This helped me so much!

[@lowhertzhighspl]

Presentation was professionally done.

[@Logaweed]

I just put this exact precut on today ordered from his website. If you do eveything write and you have the write tools it will turn out excellent.

[@driftersgonewild710]

New title "How to Waterboard your Door Panel"

[@CoronaTheVirus]

LMFAO!!!!

[@Eatprepd]

Good one haha

[@MamAras]

I wanna thank you for explaining it step by step, and I wanna thank me for watching :)

[@amoaa06012657]

Great video helped a lot can't wait to get my kit and start GPO

[@jimmylamb9595]

Pre cut kits look easy to do..thanks for the how to info.

[@ShiestyTeknikz]

can i call a fire truck to water my windows clean? or that's not enough water?

[@mikibigheart]

Lenny Bruh omg hilarious

[@iicube5000]

😂

[@mattyjgallo]

oh theres no fire, I'm just tinting 1 window

[@ChuckWood]

Ive watched several different people tint over the years and they all use a fuckload of water.

[@IamKittySweets]

😄

[@fuzzylumpkins6034]

This feels like when your buddy is high and tries to explain the physics of a movement in a long, drawn-out story to make it sound interesting when he could've just said he had to jump. Apply slime, fit tint, squeegee, tuck tint in seal, squeegee again. Leave to dry. It is not as complicated as drowning the car and people giving dumb names to squeegees . I do appreciate the content. Just over cooked.

[@jofinger3877]

I need alot of practice, thanks for the helpful video. Now i try to get mine done

[@wp11302000]

I'd like to get more info on pulling out seals too. Which ones to pull, when to reinstall. Nice vid once again

[@AwakeDude911]

you sir just sold me $34 dollars in tools...and a video to do the job ! thank YOU !!!

[@hunteresSAS]

All these water comments are killing me.

[@verts3565]

lol

[@amcclaur80012]

Like really how much water do you really need

[@PSUNATION]

It’s water…it does dry out

[@scarce911]

You've come s long way man.. congratulations on the "tint studio" ..btw, I'm glad you don't say "tinternet" anymore lol

[@maxomega72]

Thank you for explaining max from italy

[@daffyduckphd]

Had watched couple other demos. And working with uncut tints was a drag. I ordered a pre cut; and was watching uncut videos-to learn process. Click … “watch a pre cut dummy” This was first one. WOW what a difference. I was about to return my tint and install kit and bite the bullet. I was trying to avoid: paying someone $300+. Uncut was a pure hell experience about to happen. And I knew between it, frustration, impatience I’d lose lot more mental life affirming energies; and I’d probably screw it up. But after watching this pre cut video I’m a happy righteous dude. And I’m looking forward to trying it myself …. though the rear gives me pause. Just cleaning that sucker … I’d rather go down with the Titanic. But I’m hopeful and by installing sides I should be faith full. Thank you for posting.

[@Moeyasseri]

How did it go?

[@brrrt7623]

Well? How'd it go??

[@youngroosevelt38]

Any update?

[@latyrasellers-lim8101]

Thank you I'm going to attempt to tint my windows tonight I'm just nervous because it looks intimidating but you made it look really easy

[@tracruns1406]

How did it go?

[@latyrasellers-lim8101]

@Trac Runs it was horrible tbh I only got one window to stick 😢 I just ended up going to a shop 🙃

[@tracruns1406]

@@latyrasellers-lim8101 All windows are different, some more difficult than others but you made an effort and that's what counts .

[@MrMarc806]

Hey guy ur good at this. great video for teaching people how to tint there car or frucks,, thank u thank u

[@chadbice8919]

Really good process!!

[@ajsimpson1981]

this is probably the best how to fit pre cut tint video I've seen nicely done.

[@davelee3207]

Very good job of explaining in very good job of showing us thank you appreciate it keep up the good work

[@chadsexinton]

JESUS. ALL THAT WATER. YOU'RE TREATING THE INSIDE OF THE WINDOW LIKE ITS THE OUTSIDE.

[@lSil3ntZer0l]

There is no such thing as too much water (cleaning solution) when tinting. The inside has to have no contaminates on the glass what so ever.

[@RamonAsher]

+lSil3ntZer0l Yes, but now the inside of that door is going to have contaminates, when the copper contacts on the electrics corrode and the interior of the door begins to rust.

[@dodgeramsport01]

Do you not drive in the rain?

[@RoastFlea61]

Dodge Ram 01 ah yes, because the rain hits the inside of the window. Cause that’s how that works.

[@nate2490]

@@RoastFlea61 but a little bit does go down into the door. Thats why there are drains at the very bottom. No damage is done by this at all.

[@nhsplayer07]

a spray bottle works just fine a garden hose is a bit unnecessary lol

[@tribulation138]

It's not a garden hose idiot. It's just a pump spray for your garden.

[@ItsTheApeManWC]

He is a professional. The products he uses for everyday use is gonna be different obviously

[@bigdaddy4429]

Holy shit a beautiful job. I’ve watched 6 times. Nice!

[@michaelmichael9940]

Awesome job explaining. Thanks

[@Saytheodd]

I wish I ordered my tint from you thank you for the video

[@TheOlavarria49]

You are the first one who pull out the plastic bag to protect the car. Thumps up for that. Hey, do you have soapy water on that little thing you are using to spray the glass?

[@chrisyummytaco]

What do the different percentages of tint look like? I'm trying to decide what to put on my front and back and how well the different shades would look nexxt to each other.

[@b.jlovett]

Great job and video buddy , I would think a car such as a Challenger or a Mustang with frame less door windows would be an easier process 🤔.

[@aaronevans5450]

Thank you for sharing with us how to do this. You make it loos so darn easy but I know I will screw this up. Lol

[@Solidcastrecords]

Nice tutorial , will try do it , Thanks !

[@ziamura8095]

Good job, and you are the fastest one .

[@davidgaston6575]

When you pull out the seal, when do you put it back in. Afew days after, can you drive it, or right after finishing the tint?

[@808autobody7]

Love the video... done properly. Screw the idiots that dont understand water drains and mostly everything electrical on a car is waterproof especially on doors so keep it up. 👍

[@sandokan1578]

Thank you for the video. You use only water? I see other videos using soap water... Can you please clarify on this.? Thank you

[@robs5579]

Made it look so easy

[@speedy9640]

Hey man good video looks pretty easy but how do you do it on a subaru legacy 05 sedan doesn't have window frames also the back window does it come molded or you need a heat gun

[@VanquisherUSMC]

Make sure you use your fire fighter hose to tripple clean and short circuit everything in the door, CHECK!

[@AkashColvin]

Can you precut one for 2014 BMW F30 Model? 328i - 4 Door? I don't see it on your website for newer models.

[@Lifecontent1987]

He did do a great job

[@Rick_Motorsport]

thanks for all your videos, you´re a ***** stars person, thanks a lot..

[@lartstnc]

so i tinted my trunk windows (98 explorer) and i managed to leave scratches all over my windows. i guess cause i used the cheap, shit blade that came with the kit(Blackmagic). i did use your technique, squeegee from the center out then up and down and out. worked great. i have very few bubbles that i just can't squeegee out. oh and this is my first tint attempt but i think it came out great.

[@centraltexascivic7299]

I need precut tint for my vw passat wish there were more videos on this car

[@jeremy0203]

nice graphtec... FC series? im curious which/who's program are you using for the precut stuff? There are quite a few out there and I am having a hard time deciding which I would wanna go with. Also of course how do you like that program, pros and cons?

[@tristangould3310]

can I use the garden hose ?

[@nickvillasenor1215]

Where do I get one of them super soaker 1000's? Or can I just use a bucket?

[@parmorama]

You can use a pump/pressure sprayer from a garden centre.

[@Beheldx3650]

are pre-cuts worth the money you spend? how much is a good pre-cut tint kit cost?

[@LargerThanLifeLTL]

great tutorial brother!! many thanks :-)

[@cali0559]

Nice! It would be great if u can go into detail in a back window as far as getting the water out behind a tight third brake light. What tool do you recommend for that.

[@daffyduckphd]

I don’t know your car.My brake light housing is moveable (to change out bulb - LEDs nice until you need fix); disconnect wire harness and problem moved out of sight, mind. Just saying. Good luck.

[@stevenr10155]

Great vids guy. Top knotch.

[@joeparker7435]

I ordered a kit for my 2015 ram 1500 regular cab truck . I got it about a month ago, it came in and all looked fine... till I attempted to put it on . It was about 6 inches too short . I messaged this company and received a response to take a pic so they could see what I was seeing .. cool. After thinking about it , I realized they sent me the tint for the rear windows of a crew cab truck . Now, when I pulled it up on eBay , it brought the pic of the crew cab up . No problem , I ordered the front door kit. After several messages back and forth him telling me , that the doors are different on a crew cab and a standard , yes the rear doors are. I said ok, I’ll just order the other other kit, and eat the first one . This dude blocked me... I was willing to accept the screw up and still order he is a coward

[@thomasingram2644]

Actually the front door is different on a standard cab vs a crew cab. There is a slight difference

[@Q-gf8vb]

Ok boomer

[@kindbud5991]

Do I put the seals back on after the tint is on and dried on the car or will the tint come off with the seals on the car after the tint is dried

[@nikolarakic4749]

I was wondering if electronic below the windows works after so much water? Anyway, top quality film

[@tattrie17]

Yes, they are designed to get wet to a certain degree. No seal is perfect. Usually there is a vent or weep hole at the base of your car door, but most people never see them. I have had literally hundreds of door panels off. There is also insulation and plastic inside the door panel to keep it somewhat climate controlled inside (fights off condensation) of the door panel and keep the elements from harming the electrical switches, door speakers, etc. Never ever throw away the clear plastic door liner behind your door panel if you have to replace a window motor, window regulator, etc. Things will rust up in a heart beat!

[@ranger1496]

Thanks for information. How many windows before success ?.

[@subrosabmx94]

Gonna have to order some

[@44Thump]

Awesome info , thank you

[@katharinevachon2258]

good stuff but I have a question, how would you do a 2006 Lincoln town car

[@Droopy808]

Damn just found this video after watching all of your newer ones. I was like who is this guy...

[@mikedoingmikethings702]

What kind of water solution did you use? Does AFFF sticks better than the AR-AFFF???

[@chrisclark1964]

so how much time should we wait befor using widows up/down so we won't make tint pull up?

[@darjambro89]

can you do a Ford expedition tint windows plz. I'm new at this.

[@JayJay-de8vq]

What is in the spray bottle, water and some type of soap solution? It looks bubbley when you spray it on....

[@epicgaming3778]

Hey I want to do my side windows but I am worried that the electronics will be messed up even when I put the trash bag where does the water go when I squeegee the water down please let me know I don’t want to get water into my electronics I did my rear window and the third back light doesn’t turn on anymore what do I do please let me know to prevent the water from going into electronics, thanks

[@redlitego6085]

Great job!

[@lov3torock]

I have seamless/rimless windows, im assuming this would make tinting much easier?

[@voop.3373]

is all pre cut window tint pre shrunk? becuase i got some pre cut tint from rvinyl and im not sure if its pre shrunk or how to tell.

[@TheMrjogas]

BMW e46 1998 new shape all windows shipped to ireland?

[@asmr-everything630]

Awesome job

[@josevargas6834]

want to know what % shade film for 2015 ford explorer limited front window?

[@calle24seven91]

hey can you precut tint film for honda civic sd

[@jorgeb878]

Hello I would like to ask you wich set tool set do you recommend window tint Chevy Cruze lt 2016

[@mikesgsx420]

Can you pre cut the front Windshield for a dodge charger???

[@-_-MANNYMAN]

I have an 2007 Honda Accord 4 doors sedan. Should I order this kit?

[@dani_c7.5]

Is installing more easy removing the door panel?

[@kevinlopez9400]

Where can I get tint from sun tech like those tubes you got

[@Akave89]

could recommend a tint brand and pecentage for a 2012 toyota corolla, i was looking online but i have no idea how much to get or what brand etc.. what would you recommend? I dont know if this matters but my car is black four door sedan..

[@KurtDee]

Can you do a 2005 Ford f 550 2 door 20% window tint pre cut?

[@electricwave3]

Can you show us how to put the seals back on? I'm having such a hard time putting them back on

[@pauloevangelista4298]

Hi which tint is the best to use 1PLY or 2PLY? Thanks