INSTALLING REAR CUP HOLDERS FOR LEXUS RC350

Рет қаралды 2,224

Күн бұрын

Пікірлер: 36

@ronerdelcastillo2090 3 ай бұрын

Thanks for this video. I was able to do the replacement without removing the seat. You mentioned on your video that you could have done it without removing the seat, so I did tried it. I just pull the arm tray from the backside up and push forward toward the front. Slide in the new cup holder making sure the notch catches it and push the cup holder down from the back side and snap it. Done in less than 5 minutes.

@Giangsturh 3 ай бұрын

@ronerdelcastillo2090 no problem! If only I knew before hand about pulling up and push out, this would've been easier, but this is what the video is here for!

@ronerdelcastillo2090 3 ай бұрын

@@Giangsturh Thanks a lot though, without your video I would have no idea on how to do it.

@elonmusk8667 Ай бұрын

Thanks for the video. I'm not removing my seats anymore.

@andrewszeto6518 5 ай бұрын

I thought about installing this on my RC 350 as well. But then all of a sudden I remembered...I have no friends and no one ever sits back there lol. So I decided to save my money.

@Skate_RC Жыл бұрын

Hey man thank you for this video! Literally did this to my 2019 RC350 AWD F SPORT today. We got such a good deal on the part itself and your vid helped so much getting the seat in and out. To anyone else planning to do this, get spare clips and you do not have to remove the cushions completely. Just undo the one strap and literally pop and slide the original tray out. Then follow the rest of this video. Again thank you so much man, I can actually hold my stuff properly when commuting.

@Giangsturh Жыл бұрын

No problem! I felt like you can actually pop the tray off without pulling the seat but the little plastic clips that holds the tray in place made it hard to pull out.

@Skate_RC Жыл бұрын

@@Giangsturh Yeah, unfortunately the seats do have to come out but the cushions themselves can stay on. I really didn't want to take the seats out but it actually wasn't that bad. It was actually a good thing we got the seat out, we bought the car used from Lexus and there were sunflower seeds from the previous owner under there. So it was a nice way to get the car cleaned a bit more on the inside.

@Giangsturh Жыл бұрын

@@Skate_RC that's amazing! Gotta keep our cars clean! Take care of it.

@Skate_RC Жыл бұрын

@@Giangsturh Yep and thank you, will do!

@Alex-kv3tg 2 жыл бұрын

WOW it's very clear for install instruction, thank you

@Giangsturh 2 жыл бұрын

You're welcome!

@andypetersen424 24 күн бұрын

DO NOT REMOVE THE SEATS! It’s easy to just pop the old center piece out from the back, lift up, then slide forward. Reverse for the instal. Super easy, took 3 minutes.

@Giangsturh 24 күн бұрын

@@andypetersen424 I found that out the hard way

@retroonyoutube5402 Ай бұрын

Do you know where the rear occupancy sensors are? Mine started coming on over bumps recently and im thinking some connector under this seat might be loose?

@Giangsturh Ай бұрын

@retroonyoutube5402 I never seen a rear occupancy sensor in an RC before. There were none when I did it.

@retroonyoutube5402 Ай бұрын

@@Giangsturh damn, so I guess no point to remove the back seats for this issue then

@Giangsturh Ай бұрын

@@retroonyoutube5402 do you have something heavy in the backseat? If so, connect the seat belt. The lights should be off

@retroonyoutube5402 Ай бұрын

@@Giangsturh back seats are both empty, but plugging the belts in does turn off the warning light Hence the seats are detecting some weight on the seats by mistake, which is why I thought an occupancy sensor might be going bad

@Giangsturh Ай бұрын

@retroonyoutube5402 what year RC do you got? Mine is the 2015 rc 350 f sport