Installing / replacing your Suzuki Speedometer cable

[@nleco]

best cable attachment video I've seen. I'd hang out with this fellow just to have a beer and listen to him tell stories.

[@lawrencedube229]

I unhooked cable from speedo and can turn cable easily ,I heard a pop in speedo sensor on first ride after new tire replacement ,I'm going to order a new speed sensor and hope that's the problem 🙃

[@lawrencedube229]

I don't know how to get speedo cable off sensor ,my bike is a 94 Sportster??

[@Martijnvdboogaert]

Thank you Santa, you sound like a fun guy being around with.

[@pjayx7320]

Most American tutorial ever

[@kallumbmx]

most American tutorial ever, but i tilt my hat to your sir, supermoto speedo just stopped working and i couldn't be bothered to see how it actually works, well now i know 👌🏻 best go fix it 😑

[@safetystephen]

Thank you very much. I am fixing the cable on an '82 KZ750 after I put a better tire on the front. Speedo worked exactly like you said for a couple blocks then nada. Much Regards.

[@a.b1266]

The speedometer gear at the front wheel has quit turning on my 1980 GS1000G. Any fixing this part?.... Looks like a replacement thing....

[@jasonstale5900]

I almost bought a new cable... most helpful sir!

[@nonyabiz2777]

Mom mom used to call me a fu(k head. Oh brings back memories. Nice.

[@Xeil]

I actually had this issue on my GPZ. I thought I had got it in properly, but I found myself not being able to read my speed when I went to the gas station to get brake fluid because my rear brakes bled out on accident lol (fixed that too). It eventually caught and is working now, but i'm glad to know that something so simple can help a lot. :)

[@rayleduc6564]

thank You so much, Save me some money you did in time

[@SaintSantiXIV]

Best intro ever

[@PlatinumG]

The moment he said fuckers and fuck heads I immediately liked the video. This is how I learn. Also this helped me fix my problem. Thanks fucker.

[@benjisbikes8182]

Thank you!!

[@lawrencedube229]

How do I know if my front wheel speedo sensor is broken

[@dawino6260]

If it's in right and dont spin the cable LOL ... but that little dust cover pops off easy - you can visually inspect the gear in it pretty easy .. Quickie way to be sure if it's the cable -- pop the cable off at both ends - spin the inside cable with your fingers - if the other end doesn't have the center cable spinning, it's a bad cable

[@agiantman]

I like this dude's attitude. Thanks for the tip!

[@thebanditsix]

Disconnect cable from wheel end then put end of cable in a drill and spin to check if cable n Speedo working if u don't have a centre stand.

[@myownspecies5628]

Legend

[@angelofdeath12345]

Good, real how to! Practical, no PC, whatyaneedtoknow!

[@MetalHeadMarc]

Dawino, thanks for the colorful commentary!

[@lmind2]

This guy is AWESOME! Wish there were more of you around. All this P.C.(politically correct) shit people spout smells like old ass and feet.

[@darknitethunder]

Line the Further-Mocker up Tightener up and your good to go. Classic Biker lingo.

[@dawino6260]

Think that one has the newer single screw with a push in... but yes pretty much all cable operated speedos

[@powerserg7230]

That intro is awesome haha

[@levithomas1960]

What is that part called

[@dawino6260]

The sensor/speedo drive? or the cable?

[@levithomas1960]

@@dawino6260 speedo drive the thing that insert into the wheel to tell how fast u go

[@dawino6260]

@@levithomas1960 speedo drive is what it was called 40 years ago .. that's still what I call em today .. bikebandit has a parts fiche up on their site .. different manufacturers call it different .. but generally if it's cable type it's a drive and if it's electronic it's a speedo sensor or "inductive pickup"

[@dawino6260]

pop both ends off and make sure the cable didn't snap internally - rotate your wheel make sure sending unit is still spinning - if both of those are ok it's probably the plates in your speedo (at which point it becomes cheaper to ebay in a speedo than to have a watch guy fix it)

[@audinos4827]

Does a new cable need to be lubricated before installation?

[@expletivedeleted5183]

Just changed the chain and sprockets on my bike. Dude before me had a 14t with a 47t which threw my speedo way off. All good now.

[@soubithefirst]

thanx a million i have to install my first ever speedometer and couldn't figure how the hell its hooked up

[@triblemaster]

can you show how you change the speedometer gear box?

[@patrickrobertsohm3793]

On my scooter, both connections are OK, but the cable by the wheel, just broke up. I guess I need to change it, but hard to find the right one for a Motorstar 150cc.

[@cfazekas0441]

Hey I have a question I have a 1978 gs750 and the carbs arnt giving the engine enough fuel to run it was running fine and it just stopped running so I hook the floats out and bent them a bit and it worked for 1 min and stopes running and idk what could be wrong in the carbs

[@dawino6260]

Generally I've been getting em pre-lubed -- when in package if caps on both ends=probably pre-lubed if no caps on ends = probably needs to be lubed

[@dawino6260]

Which bike do you have (so i get one out that has the same/a simular one)?

[@narcovice]

how will i know if it worked

[@cfazekas0441]

After I put em back together it pissed fuel out of the over flow then it stopped and the engine cut out so do you think that's an improper float adjustment ?

[@germagic2]

i love how you talk

[@narcovice]

who knows may even work on 49cc moped. i pull the cable back and forth and the speedomemoter moves but not when in the moped.

[@dawino6260]

If they are overflowing Float gap is USUALLY the case - (and probably in this case based on you had em floating too high before) ... needles and seats will do it - but if a gap adjustment was just performed and they didn't leak before - I'd be inclined to say bad gap and check it first -- I'd also be suspecting a gas washed engine and IMMEDIATELY before I even turned it over again - changing the oil

[@DirtyGarageTx]

Does these apply to 2005 750 gxsr?

[@expletivedeleted5183]

I like your I don't give a fuck mentality, great shit! Hope you still respond to these posts, cause i have a question. I have a 2006 750 katana and the speedometer reads 70 when I'm only doing about 50. This wouldn't fix that problem would it? Not running right now cause I'm doing carbs, lines, pet cock and tank restore/rebuild.

[@omegaman7241]

thanks bro

[@joeboxer9819]

Why is he repulsive? The guy just showed you how to do something that you probably didnt know how to do. Was it his words? If so my friend, heres some thicker skin. Hope it fits. Great video!

[@FoSbaKiaS]

i went over a road bump and my speedometer stopped working. I assume a cable must have slipped off, but how can i fix this? anyone has an answer?

[@dwayneguydammit]

thanks for the vid! i gotta change one on an intruder 800

[@dawino6260]

The speedo should move if you spin it... Did you rotate your wheel a little to make sure the sending unit is spinning? (lot of guys mess those up when they put their wheel back on - those little ears on the cheapies are a sad joke - the real gear ones dont do that though)

[@tiddysprinklez]

I have a CB Honda but I'm having issues trying to get the speedo gear off of the wheel what's needed to get it off

[@FoSbaKiaS]

thanks a bunch bro, i'll give it a try: ) i wish i dont make things worse

[@dawino6260]

google kazuma parts -- it's all interchangeable

[@CH33BO_OFFICIAL]

you are hilarious dude.cheera

[@narcovice]

well i only noticed what i told you. but ill try with the wheel thing. i screw it on the wheel like supposed to. but it wont work mabey need to buy a newone.

[@dawino6260]

sounds like you bent em the wrong way and are starving em -- Should be able to just google the float gap - and yes even with brand new floats - them old brass ones have to be gapped every time

[@makea4tune1]

thanks man ...

[@dawino6260]

Always glad to help

[@IKurtC]

thanks for this vid good Sir

[@dawino6260]

good source is "parts for scooters" without the spaces stupid crap wont let me post a link but you get the idea on what to add behind it

[@pinkpantherer]

Great commentary

[@cfazekas0441]

Ty

[@P14YCR]

thanks man!!!

[@cfazekas0441]

Many thanks :)

[@jonathanreonico2722]

Ok thank..i got it..godbess

[@jonathanreonico2722]

Ok thank you

[@SidecarRider]

Fucking A.. Thanks!!!!

[@jonathanreonico2722]

Wala para sa rs 125 honda..nasira kc ung akin

[@dawino6260]

I THINK you are asking is the RS125 Honda the same method -- Yes it should be -- Honda at the bottom may be a screw on cable or it may be the cable with the wing and a phillips screw -- topside will be the same at the speedo --- I'm mostly guessing at what you asked -- i read and write English, Hebrew, and Russian and guess at the rest

[@jonathanreonico2722]

Ok sir..now is ok

[@DJlobo702]

Son of a bitch my intruders speedo cable just broke. Nice timing fucker!

[@DirtyGarageTx]

Ok thanks

[@andrewglasgow4812]

sounds like a typical trump supporter

[@dawino6260]

I'm actually Constitution Party -- But i enjoy picking on Democrats... A: because they represent the very same type of socialism my family came here in 1955 to escape and B: because it's just plain fun