Installing the 150gpd Water Saving Upgrade Kit | How To Tuesday

[@colin-carolmitch1817]

I'm not keep a reef but I do keep and breed Discus,I just Love Aquatics. I use RO water on my Breeding tanks to great success. I love this video and have followed it and now I'm producing very nearly double the RO for the same amount of waste, Win win. Many thanks for the Imformation.I will continue to support, here in the UK. By the way , love the challenge for Joey, who I also follow.

[@colin-carolmitch1817]

For succesful Breeding we have found that a TDS of around 80-100 seems to give us a higher fertilization rate of the eggs. We mix RO to HMA water in a 1:3 ratio and it just seems to works for us.As you know, Everyones source water is different so It might not work somewhere else.We are lucky that our tap water has a PH of 7 and a TDS of anything between 130-160 which is pretty good and only needs a small amount of adjustment. As for RO being a must, For us, yes it is, but if you were lucky and had the space you could set up a good clean rainwater collection and storage system. That water is excellent to mix into de-chlorinated tap water. Sorry long answer to a short question I know.

[@MyMidlifeCrisis2024]

Absolutely love this channel it's helped me out loads. And now I'm starting up my first ever reef tank i'll be here a lot more.

[@techwrecker9518]

I would have never thought of that... Going to implement it as soon as parts get here. THANKS

[@dennyr123]

Awesome !!! I was already considering doing this, and this helps quite a bit. Thanks so much... BRS is the reef keepers best friend !

[@timmydsaltwater983]

Thanks guys! Done in less than 5 min. Flushing for an hour then on to making pristine water.

[@JDReef]

That is awesome I've had an old membrane holder lying around empty for months.. I know what I'm doing with it now lol... Excellent video tutorial as always :)

[@SalamanderFangskin]

I just bought my first RO/DI unit with 6 stages, I'm exited to start using it! :D This kit is pretty interesting :)

[@SalamanderFangskin]

***** Thanks! :) I hope I can have a good start in reefing.

[@SalamanderFangskin]

***** Plus I have many years in the fresh water fishkeeping; but you know, never is enough. I want to understand very well everything. You guys help really a lot. As a matter of fact is because of you that I decided to get in to reefing :) very good information that you guys provide.

[@SalamanderFangskin]

***** Thank you guys, keep it up! :)

[@915Mang]

Nice video as always. But I want to add that people should buy this as the kit, because I got confused and had to buy everything individually which was a pain in the rear. I watched the old video, this one was way better! And a question, when I have the flush valve open, ro water is still being made right? Thanks BRS!

[@915Mang]

***** Thanks BRS, I leave the flush valve kit open before I make my RODI, and watched the old video to make sure I set it up right. I was worried because some water was going into my Reservoir. Anyways, thx!

[@-8_8-]

I did this with a 100gpd up to 200 gpd. Only difference is mine has a bypass for rinsing the membrane? So now I'm not sure, but it seems like it would only rinse the one.

[@BRStv]

In a water saver configuration, both membranes run off of one flow restrictor and one flush valve. When you open the flush valve, both membranes get flushed.

[@aquawhitereef]

Not sure I've found the video or not but do you have an instructional video on proper setup of an RODI system? Proper way to plumb it and add a pump if the water pressure is low, make it cleaner looking, best way to utilize the system and so forth.

[@berto3113]

Does it matter what brand RODI unit I’m using?

[@BRStv]

The water saver upgrade kit can be added to any brand RODI system as long as the tubing is 1/4" and the membrane GPD sizes match up 🙂

[@jseagate84]

How would you install a flush valve on that system?

[@BRStv]

A flush valve (either manual or automatic) would simply replace the flow restrictor. Just remove the flow restrictor, pop the lines into the new flush valve, and you're ready to go! Check out this video for a full how-to: kzbin.info/www/bejne/Y6LTk3udm7GGqtE

[@rayhaley]

I have the ro buddy 75 and have added to it. I added an extra carbon filter as well as an extra 75gpd membrane. I can't get the auto shut off to operate properly. I also didn't upgrade to a higher flow restrictor. The aso is after the 2nd carbon filter and everything is hooked up like in the video. What am I doing wrong?

[@blake_fishing]

Excellent video! Would this work with my small 75gpd RODI unit?

[@freeekonaleesh2]

Would adding a Third 75GPD RO Membrane (3 - 75GPD - Total 225GPD) produce a better yield in product water with less waist water than just Two RO Membrane's?

[@challenge792000]

I have a BRS 6 stage chloramines RODI unit. My pressure going in to my RO is about 56psi. Would you recommend this upgrade with out a booster pump? My supply TDS ranges from 165ppm to 175ppm

[@nebulaM16]

Hi I’m about to update my RO into dual membrane unit. I have trouble getting the Y connector to join the two product water’s. I would like to ask if I could use the T connector for this application. Best regards

[@aabtosway]

Where does the check valve go for the auto shut off??

[@aabtosway]

+BulkReefSupplyCom Thank you for your quick response!! Well I have one of your membranes, do I need one for each product line/membrane?

[@2711marcus]

Excellent video 😊 I have a question..... If you're.wasting half the amount of water after this upgrade does that mean the pre filters and membranes will last twice as long?

[@BRStv]

Exactly right!

[@briansfishtanks]

I've been planning to add this upgrade soon. Glad you put out this video to refer to when I buy it. Diggin' the new hair cut too BTW!

[@paulbragin5034]

What flow restrictor would I use for two 100gpd membranes?

[@claireputnam9435]

Hi, nice set up. I realize that my question is a little off topic. However, I have two different Ro/DI units (bought one and then decided on a larger tank) so could I run the waste into the second unit and get water from it without hooking up another line to it via the main inlet to the current ro/di system?

[@claireputnam9435]

***** No, they are not the one that is hooked up is a larger one than the one that is not installed.

[@michaelisakov1108]

Where do I install a check valve with this type of setup?

[@BRStv]

The check valve on our BRS units are built into the product water elbow fitting coming out of the membrane housing. That said, if you have a different unit, you'll want to install the check valve between the product line output of the membrane housing and the auto shut off valve.

[@michaelisakov1108]

How donu install a flush kit on this double membrane system?

[@michaelisakov1108]

@@BRStv I'm speaking about a double membrane system, also I have 2 150gpd membranes so I need to get the correct one flow rate flush fitting.

[@dipankarbiswas2683]

Do I need 150 gpd pump ??

[@BRStv]

We'd suggest using a booster pump for a 150 GPD water saver system if your PSI is lower than 65. If you're within the range of 65+ PSI, you don't necessarily need a booster pump.

[@trevormetcalf3034]

I have the corlife pur flow 2 24 gallons per day would I be able to get they and only put a 24 per day membrian

[@anthonybostock7515]

I want to run 2 150 membranes what restrictor wouldn’t want for that

[@anthonybostock7515]

What about to 100 then

[@saqibkharal3300]

Sir i have installed 75gpd RO on 20tds which is already purified by RO plant we need zero tds because we use this water in laboratory. So the issue is now i am getting 4tds and water output is very low like drop drop. Flow restrictor of 300 is pre-installed. So kindly guide me what should i replace to get more flow and low tds upto zero if possible. Thanks in advance

[@bensb166]

Is this method better than how you guys demonstrated in one of your older videos on how to install the 150 gpd upgrade kit? In the older vid it tells you to disconnect the red line and add it to the incoming on the top RO membrane rather than keeping it on the bottom, etc. Anyway, I'm curious to know which method is preferred. Thank you in advance

[@DKTek07]

Once installed and running, the system started squealing at the new RO housing waste outlet that feeds the second RO housing inlet. The tone changes with pressure changes. There are no leaks. Well water pump has a 30/50 switch. I rotated system to purge any trapped air but squeal remains....any suggestions? Very annoying.

[@theguyonthecouch3615]

Does this work with a flush kit? Is the installation any different? Thanks!

[@markgardner9308]

you mention 75 gpd. my ro system is 100 gpd. should i use another 100 gpd membrane?

[@bobbonecrusher]

great tip how to double your RO

[@rheinoxa1]

I had 100 gpd. After watch your video i bought another 100 gpd membran and set as in your video. The problem is leaking in drain water. HELP me please. My booster pump is 70 psi. And flow restrictor is 300.

[@shaunschannel1632]

So my tap water supply before my ro/di is avg. 380. Would I not benefit from this because it's too high?

[@davesmith9160]

I just upgraded to the 150 and I'm still only producing 3 to 1 ratio.. Pressure is at 65 psi and I changed all filters.. Any reason why?

[@davesmith9160]

+BulkReefSupplyCom sent..

[@davesmith9160]

+BulkReefSupplyCom I just purchased a 800 ml flush kit

[@MrSamurai904]

does this only work on brs ro/di system

[@MrSamurai904]

ok i have a 100gpd so will it work or no or do i need to tweek something

[@Breezee_86]

When your upgrading the membrane do you have to replace your original membrane at the same time as adding the new one?

[@paulbragin5034]

Does this work for a water general rodi with 100 gpd membrane?

[@markablevideos]

What's the minimum inlet psi to add it?

[@insectkiller2005]

Hi do you guys have a video on correct flow restrictors to fit either in single or double membrane mode . I also have two 75gpd membranes but with a 400 flow restrictor and I see you guys use the 550 .

[@insectkiller2005]

BulkReefSupplyCom ok thanks for the reply . What about the flush kit I have on mine already what do I do with this now ?

[@insectkiller2005]

BulkReefSupplyCom ok thanks very much guys looks like I have had the wrong restrictor 400 on the 75gpd :(

[@sedaquatics7277]

Hi Thanks for the advice, I’ve completed the setup now. My feed water supply is 190-210 TDS. Originally was producing product water of 4 TDS before resin. Now I have run in series it’s increased to a combined product water of 27-30 TDS. Any ideas why? Thanks in advance for your help.

[@sedaquatics7277]

BulkReefSupplyCom you were 100% right, thanks a lot. Membrane was lose, now re done and total combined TDS is 7 before resin. Much appreciated thanks

[@reeferaddickt66]

Hi guys, I saw this video and upgraded my RO unit with parts from BRS. My membrane in there was a 100 gpd, so i bought another 100 gpd membrane and installed in series. It seems to be producing water way to fast, 5 gallons in under 25 minutes. I installed a psi gauge and keep water pressure at 60 psi. I also upgraded the flow reducer from 450 to 600. The TDS meter is in the mail now, so I can't test the output water (lost my first meter). I triple checked both ro housings and have the outer port as the waste line. Any ideas is appreciated thank you.

[@reeferaddickt66]

***** Thanks, I missed your response. I took the unit apart a few more times and found that I had a line mixed up. One of the RO membrane housings I had, had a red line out for product water. I thought the red line out was waste. I fixed it and it all seems to work well. Oddly, if I used the original flow restrictor 400 gph it produces 0 tds water. If I use the updated one 600 gph as suggested on the website for 100gpd x2, it produces 1 tds water. I may add a 3rd ro membrane, I have lots of water pressure ( easily 80 psi),

[@cesar68033]

In my house I have well water I think I need 3 reverse osmosis I have high tds my 1st stage of my tds before resin is still 056

[@mannyvenegas4806]

Great video! How do you feel about a different connection, being, splitting the pre RO water into two separate membranes and joining the waste waters with one flow restrictor? I ask because I would like to do this with an Auto-Flush restrictor. If not, do you recommend the Auto-Flush with the setup on the video? Thanks!

[@oscarlover131]

I was on board with the idea until I saw the price tag! I guess membranes don't come cheap lol

[@DariushMolavi]

How does this change with the flush kit that you have on your plus systems?

[@jmdelira87]

What?!? He cut his hair?

[@trevormetcalf3034]

Get this*

[@knexmaster4119]

Why did all of my fish die when I put vodka in the tank?

[@cincinnatimike7]

I should have watched your video first. Randy hands are too fat! Couldn't see anything lol