INSTALLING THE BEST CATCH CAN ON THE MARKET.

Watch and enjoy as I install a Mighty Mouse Catch can on my LS3 Corvette.
WATCH ME WRENCH DISCLAIMER:
I am not a trained, licensed or certified automotive mechanic nor am I a professional automotive repair facility. Please consult with your local dealership and or a licensed and certified mechanic before working on any vehicle and make sure you utilize any and all safety equipment and safety measures at all times. It is also advisable to reference your vehicle’s owner’s manual for proper maintenance of your vehicle and for safety tips when working on your vehicle. The sole purpose of this video is solely for entertainment purposes as I document and share my build, that’s it. Due to factors beyond the control of WATCH ME WRENCH, I cannot guarantee against improper use or unauthorized modifications of this information. WATCH ME WRENCH assumes no liability for property damage or injury incurred as a result of any of the information contained in this video or any of my videos. Use this information at your own risk if you elect to do so. WATCH ME WRENCH recommends safe practices at all times when working on any type of motorized vehicles and or with tools seen, utilized or mentioned in this video. Due to factors beyond the control of WATCH ME WRENCH, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular results. Any injury, damage, or any type of loss that may result from improper use of these tools, equipment, vehicle, failure to utilize proper safety equipment and safety measures or from the information contained in this video is the sole responsibility of the viewer/user and not WATCH ME WRENCH. Please wrench safely.
Follow me on twitter @WATCH_ME_WRENCH and on Instagram @WATCHMEWRENCH. I can also be found on corvetteforum.com @ Watch Me Wrench

[@Anthony_Pell]

I like how you routed the hoses.

[@WATCHMEWRENCH]

Thanks for watching.

[@saintnificent5532]

Professor Wrench! I heard/read/dreamt(?) to mount a catch can as low as possible. Gravity helps keep more crud in the can. On my Vette my catch can is located where your old one was. I don't catch a whole lot of blow by in it. In my 6 banger Vortex Silverado I have the catch can level with the oil pan and it seems to catch more crud. I know different animal, and the pickup's my daily but still just thinking about the "gravity" thing. Like a siphon thing, you want to be lower than the thing you're robbing. And the first minute of this vid was *Excellent* the sound was Incredible!

[@WATCHMEWRENCH]

Professor Wrench, LOL.... Heat, vapors and steam will rises so I would guess, the higher up the better, but what do I know, I'm just an average Joe. Thanks for watching

[@saintnificent5532]

@@WATCHMEWRENCH Yeah "Professor ", your vids remind me of a community college class on How To Make A Hot Rod! Have you ever seen *The* Shell - Ferrari commercial? The audio is Incredible! I've probably Heard that audio more times in my life than Anything else...

[@WATCHMEWRENCH]

@@saintnificent5532 I do recall an old commercial with Ferrari race races. Is that the one you are referring to?

[@richardbarber8147]

Put the same one on my 2012 gs with A&A,BTR cam,headers,x pipe. Makes 685 rwhp 619 torque.

[@WATCHMEWRENCH]

Sf far it works well, I'm not seeing any condensation. How about you?

[@richardbarber8147]

@@WATCHMEWRENCH Maybe a table spoon of oil in 1000 miles.

[@WATCHMEWRENCH]

@@richardbarber8147 That's not much at all.

[@67smustang]

Did you need retune the car with this catch can i have same catch can and setup blower on ls7 only my fuel trims go leaner to both banks 12+ on cruise

[@WATCHMEWRENCH]

Perhaps the valve on the catch can is stuck open or closed. My car is fine, no tune needed

[@champspec]

Alright. I’ll be back…

[@WATCHMEWRENCH]

thanks for watching

[@benjaminluke8799]

What did you do with the stock dry sump lines? Are they routed as normal

[@WATCHMEWRENCH]

Yes they are still routed the same.

[@benjaminluke8799]

@@WATCHMEWRENCH what about the nipple on the valley cover? Did you cap that off?

[@WATCHMEWRENCH]

Yes, per the instructions I cap it off. @@benjaminluke8799

[@fredericoevanchyk7252]

𝓹𝓻𝓸𝓶𝓸𝓼𝓶 ✅

[@WATCHMEWRENCH]

Thanks for watching.