Installing The CLEANEST Front Lip On My Acura RSX Type S and Instantly BREAK It..

Acura Rsx front Lip Install!
05-06 Rsx Lips Only!
Magic Drift Lip 1: amzn.to/43Ct9Wc
Magic Drift Lip 2: magicdrift.com... (sold out)
Lip 3: amzn.to/45MZv2C
Yellow Fog Light Film: amzn.to/3MPLfx1
My Camera Gear 📸 & Mitsubishi Car Parts 🔧
www.amazon.com...
Merchandise 👕
www.racelegacy...
Social Media ⏬
/ miguel_dsm
/ racelegacy
www.tiktok.com...
Contact Email: [e-mail]
Spanish Channel 🇲🇽
/ migueldsm20
Mitsubishi Eclipse
Mitsubishi Evo
Mitsubishi 3000gt vr4

[@diamanteracer]

Miguel, look into Mac LIfter. They have these kits that make your front and rear bumpers fit more flush to the body but also in their kits they come with these plates that screw into your bumper to fix the issue you are having. I recently just go mine for my Prelude. Yes a Prelude... man when you first were showing what car you got before revealing you got the RSX I was hoping a Prelude... oh well at least we share on platform... the DSM always

[@rsx_chucky5397]

Yea like he said Mac lifter is the way to go, I'm thinking I'm gonna get some for myself

[@President_Blanco]

Dsm’s stay supporting bro 🫶🏽

[@MiguelDsm]

I’ll always have love you for you guys 🫶🏻

[@shardsforme]

Damn man, busy af and still killing it with the content. Way to keep working it out, man. Good work

[@MiguelDsm]

Trying my best man. Thank you

[@GhostDigital2k]

The RSX is coming along nicely. Can't wait to see the wheels. Definitely get some rest man.

[@AWD_T]

Get a thin sheet of aluminum and trace out bumper support. Drill hole(s) where needed and rivet it onto the remaining plastic. Just like how the eclipse front bumper is supported on each end except you rivet it on.

[@Evlh4x]

Option 1. Always liked the Dech Mech lip for the Evos but couldn’t find one at the time. I think that was the first video I watched of yours, of you installing that lip lol

[@MiguelDsm]

I might be reproducing the Evo deck lip In cf if I gauge enough interest. I’ll start pushing it when I get my Evo back from the shop

[@boricuacarenthusiast2553]

Love how the RSX is coming along👌🏼

[@kcrsx1994]

I knew i recognized that dsm from this vs that. Awesome that you have a rsx

[@manito6912]

Look into the maclifter kit. Helps aligning the bumper tabs n not coming off kinda like a quick latch

[@MiguelDsm]

Second comment I get. I’ll look into them. I wasn’t sure what they were

[@slipknot52331]

Good shit amigito! no te aguites!!! I know things can get tough sometimes, but just hang in there. Your hard work is going to pay off.

[@MiguelDsm]

Sticking it through man

[@tylercooper1058]

Looking great buddy. Those Mugen ft ends are amazing. Enjoy all your videos.

[@pFbSpecV]

It’s coming together! I get the feeling of to many projects at once! I have 5 cars and 2 have no motors, 1 needs a tune, 1 needs all new timing parts, and the last one needs a better torque converter haha so yea I get how you feel!

[@nachoevo8034]

I've had that happened. I went to harbor freight and bought a plastic welder. I plastic welded the broken tabs and used wire mesh when welding.

[@chrisbaumgartner2164]

Keep up the great work bro! ❤

[@akacryo565]

Would you consider changing the wheels? Also I love the build so much considering I have an RSX myself you make really detailed videos for the platform and they're both entertaining as well as descriptive if you ever wanted to follow a tutorial. Keep up the videos love the car(both of them).

[@ungestreckt1]

2:07

[@igameincolor4597]

Enjoying the rsx content seeing how i also own both.

[@chadjohnson6229]

Miguel, if you want to expand your content while growing as a car enthusiast, you should teach yourself to paint. It’s cheaper than wrapping your car, and isn’t as hard as you think. There is a wealth of knowledge for free on KZbin, and you could get an LVLP (Low Volume Low Pressure) paint gun and a spare fender. I too thought it would be out of my scope and too hard, but I’ve now painted 4 cars and I’ve gotten better each time! Trust me, there is nothing like fresh paint that you laid with your own hands - plus you could help your car subscribers who are wanting to learn how to paint.

[@RadRaf]

😬😬😬Waiting for an update on the mitsu!! Take your time brother. You've been pounding content out for the past few years I think we can all understand a break here and there. You guys still planning to continue tuner talk?

[@MiguelDsm]

Thank you man. I’ll be letting you guys know about tuner talk in the 3000gt combat wing install

[@rstezza]

What was this vinyl wrap like to work with? Would you recommend it for a beginner??

[@pstge]

What other similar screws can i buy if my local home depot is out of those?

[@dre1784]

Definitely look at the Mac Lifter kits, the bondo will not solve this problem with the RSX. The front bumper is already weak with the attachment points. Best thing is plastic weld to repair the rip C opening and get strong compressing brackets self made or like Mac Lifter. There are creative ways to fix this, been done on Hondas, BMWs etc for a long time, but that Mac Lifter kit is straight up already made.

[@MiguelDsm]

I just reached out to them! Got three comments about it so far haha

[@messyesk]

When's the turbo kit and awd coming haha

[@MiguelDsm]

Lol i need it to be reliable and use it daily

[@jewgs30]

u should get a mugen lip they're sick

[@MiguelDsm]

I’ve seen them but I’m not much of a fan

[@nachoevo8034]

What ya meant to say was "I bit off more then I can chew" 🤣🤣

[@mikeydejon2148]

Car turned out great. You doing great man 👍

[@MiguelDsm]

Thanks Mikey!

[@porterscotty1]

Either glue a washer on the bumper or run some quick disconnect buttons

[@MiguelDsm]

Going to end up running a lift kit. Will be making a video soon

[@phone8173]

i have a acura type s as well same color i also am looking for gst or gsx haha

[@MiguelDsm]

We are the same person haha

[@Jose_Evo8]

Anyone know where I can get a Carbon fiber lip locally around LA for a Evo 8 bumper

[@MiguelDsm]

Best bet is online

[@Tutuy17]

I think ive heard of people cleaning panels with acetone that they wanna wrap made from the same material as your front lip so that the wrap can stick. I might be wrong about it being avetone but thats what i think i remember it being. Also I'd probably do quik latch small buttons on you front bumper. Unless you dont like that look of course

[@justinruiz1203]

Bro get a plastic welder. Harbor freight has them for cheap. That's what I am about to do. Also your bottom bumper should have clips/screws for below

[@MiguelDsm]

I didn’t know they existed. Might have to try it. Bumper was only being held on with 2 8mm bolts

[@justinruiz1203]

@Miguel Dsm heck yeah man! I also just ordered the side replacement brackets with tabs for the bumper.

[@vicepixel]

do you live in OC? I feel like I used to drive down this street everyday in my RSX

[@El_payaso_.]

Needs a type S rear badge looks base model without it lol 😂

[@13THPR0PH37]

I like the second lip better.❤

[@djseiya4998]

¡Ay wey! You got this bro.

[@MiguelDsm]

I know man. Slow and steady

[@marvincastro2745]

That lip looks good, man! I like it a lot better than the V-lips I see a lot of people have. Something that actually molded with the bumper. **edit - I was talking about the lip you broke. lol

[@7ThrillFishing]

In the honda world, rsx type s parts are expensive to us haha atleast for me😂

[@MiguelDsm]

Im assuming comprared to the other Hondas? Try getting a Mitsubishi where half the stuff is discontinued lol

[@turbo_brian]

You're biting off more than you can chew is the saying. Also you got this, don't sell the DSM, you'll regret it

[@MiguelDsm]

Couldn’t come up with it in the moment. Not selling the dsm though

[@djpollo2474]

Lol and then there's me, who loves rear wipers😅

[@MiguelDsm]

Sorry 😅😂

[@ckojiro]

The car is looking pretty good. Really unfortunate losing that front bumper though.

[@MiguelDsm]

I think I just found a solution!

[@ckojiro]

@@MiguelDsm Nice! Can't wait to see it in the next video.

[@turbo_brian]

Better get a starion before they're all gone.

[@MiguelDsm]

Im sure we can find a barn find in the future

[@billybudd6566]

Fyi. The Mugen front bumper is worse. It's scraps a lot more.

[@endyrivas7932]

t amo miguel

[@MiguelDsm]

🫶🏻

[@vsparky6967]

Hello

[@MiguelDsm]

👋🏼

[@jahkyetiller493]

Yo

[@MiguelDsm]

✌🏼

[@speedisf]

Wao not good 😢😢😢

[@MiguelDsm]

It happens