Installing the Evenflo Revolve 360 Car Seat Using LATCH - Get it right!

[@foreverlaz3]

I’ve been forcing the car seat to level in the black ball this entire time. Completely oblivious to the adjustment level behind the seat. Thank you so much.

[@ff9813]

This is a very well done video. Very informative and simplistic to understand. Thank you for sharing!

[@PizzaBall_]

Thank you so much, I watched the video from Evenflo before this but your video did a MUCH better job explaining everything.

[@biggbootsy4]

Thank you, thank you, thank you, i definitely needed the assistance. Excellent job explaining.

[@jumurdoch1]

Great video. Specially the info about the lower anchors. I wonder if that applies to any car seat. I’m gonna look it up now. My other son weighs more than 40 pounds and we are using the lower anchors on his car seat (different brand). Thank you!

[@passengersafetykidsafe]

Yes, most heavier car seats will have lower anchor limits. The lower anchor bars in your vehicle are only designed to handle 65 pounds (both car seat and child weight combined), so they do the math and figure out how much the child can weigh using this installation method. Once it's outgrown, you must switch to using the seat belt for installing the car seat. If there's a limit, it will be by the installation diagrams on the car seat where it shows LATCH installation.

[@angelenafanucci73]

Do you have a video of how yo install with the seatbelt method??

[@passengersafetykidsafe]

Yes! You can view it here kzbin.info/www/bejne/Z3OwfayEm6mIpK8

[@douglasferris4596]

Should show how these tether to a truck back seat. It’s not like an suv.

[@kellyryan8307]

If it’s in the middle of black and white (like you have) is that considered okay position for a child Up to 40lbs. I can’t seem to figure out how to get it REALLY in the black zone. I have it fully in the upright position

[@passengersafetykidsafe]

Sorry for the late reply! I hope you found the answer you needed, but we always recommend bringing specific car seat installation questions directly to the manufacturer (Evenflo in this case). They have technicians on hand that can help you get their seat installed correctly in your vehicle. You may also choose to get your car seat checked locally by a certified technician. Search for a CPST in your area by clicking on "find a tech" at cert.safekids.org.

[@JL-kb5oo]

Should the seat belt be threaded through the blue area? I noticed yours was not. Also my base does not move but with pressure I can make my seat move back and forth inside the base. Is anyone else’s like that?

[@passengersafetykidsafe]

When you're installing this car seat with the LATCH system, you should not use the seat belt - it's one or the other, but not both together. If you'd like an instructional video for installing this seat using the seat belt and tether, we have one here: kzbin.info/www/bejne/Z3OwfayEm6mIpK8si=7UilmL-6jEKLp8tU For your second question, I'd recommend reaching out directly to Evenflo with more specific information about what you're experiencing. They should be able to help you troubleshoot any issues you may be having!

[@chiefrushhh]

What if you use lower anchors and seatbelt?

[@passengersafetykidsafe]

Thanks for watching! You should only pick one method (lower anchors OR seat belt), not both at the same time, as they are not designed to be used together (think contacts and glasses). Using the seat belt is the preferred method per the Evenflo manual. Regardless of which method you use, don't forget to always use the tether!

[@romualdochavez9672]

Does the recline position only allow for the ball to reach the middle for the gray and black zone? If my kid is more than 20lbs should the ball be further to the left (in the black zone)?

[@passengersafetykidsafe]

Yes, I believe they want the child to be more upright if they're over 20 pounds. But to be sure, it's always best to check with the manufacturer themselves. They have a customer service line and can answer any questions you have.

[@G_Lob814]

Should you always use the top tether strap and the seatbelt straps?

[@passengersafetykidsafe]

You should always use the top tether. The LATCH system (Lower Anchors and Tether) may be used, or you can use the vehicle's seat belt with the tether. We have a video on that method here: kzbin.info/www/bejne/Z3OwfayEm6mIpK8

[@Summerlad]

Thank you for simplicity

[@ariannaamador4789]

I have a question guys do you guys car seat wobbles when past by a hole or something bumpy .? Like in a rocking motion side to side..??

[@passengersafetykidsafe]

The car seat should not wobble. We recommend getting your installation checked by a certified Child Passenger Safety Technician. You can find one in your area by clicking on the "Find a Tech" link at cert.safekids.org

[@ariannaamador4789]

@@passengersafetykidsafe thank you so much !! I I sure will get this check

[@rangerlax0]

@@passengersafetykidsafe It should not move. BUT IT DOES. Like WAYYY too much. This is not a safe or good car seat!

[@passengersafetykidsafe]

@@rangerlax0 When correctly installed, it should not move more than 1 inch when you're testing it at the belt path. If you're unsure about the safety of your seat, you should definitely get it checked out by a Child Passenger Safety Technician. Click on "find a tech" to search for one near you at cert.safekids.org - Good luck!

[@rangerlax0]

Now test the secureness of the car seat while is locked in. Mine moves WAYYYYYY too much

[@passengersafetykidsafe]

Sorry to hear that! You may want to get your car seat checked by a certified technician. You can search for a CPST near you by clicking on "find a tech" at cert.safekids.org

[@adriennebills8629]

Do you have to use the car seat with the base??

[@passengersafetykidsafe]

On this car seat, the base must be used.