installing windshield 2013 Tesla model s

[@Ihaveabagonchain]

after watching your videos i feel confident to go out and change some winshields.

[@gilbertocisneros85]

bien por la instalación felicidades maestro

[@vdkarautoglassreplacement3642]

gracias gilbert

[@Veal44]

Luis thank you so much for videos,has given a lot of knowledge as a young installer...have you done any of the new Tesla? I’d like to see your technique to reassemble mirror bracket......this camera was very tough to install PERFECTLY so if you have technique I would love to see!

[@Top12Boardsport]

Great job. Well done!

[@spazzman90]

Nice work. You obviously know your shit. Model X next please.

[@kennethcheah4682]

GREAT CLEAN JOB. EXCELLENT USE OF WRD.

[@winsteezy403]

Heated wiper defrost connection needs to be done at shop?

[@arielguerrero1959]

Hola, que herramienta y tecnica usarias si tuvieras que salvar el windshield o el rear screen o el roof glass???? Gracias

[@vdkarautoglassreplacement3642]

Hola orange bat o raptor incluso viper

[@billyho28]

Man I’ve done so many of these at the Microsoft campus in Seattle

[@thomaslopez2427]

Great video! Are you in Lewisville? Im in Fort Worth.

[@billyho28]

Every single one I’ve done has always had the camera and heated lane departure area rain sensor and heated where you have to use a pick to hold the grate of the speaker, then pull the bottom part in the door jam under the a pillar cover by the knee

[@ilive41]

Yes, prior to 2015, when AP1 was introduced. But 2012-~2015 is similar to most cars. It’s the disassembly and reassembly in this video that has us cringing. Good reminder to take Tesla’s to Tesla.

[@luislehmann9929]

Is a 2018 model s widshield compatible with a 2014? Any answer you can provide will be appreciated

[@the209ceres]

Can u how how to put the 3 side seal

[@conociendolostiempos]

I noticed you always keep your glass out on the sun. Wont that glass crack after being in the sun for so long?

[@vdkarautoglassreplacement3642]

Família Salazar SANA DOCTRINA no never happens

[@conociendolostiempos]

Where i work.they Say ,its happened to other techs. Glass has cracked for being under the sun for so long. Id like to ask you some more questions. Is there another way i can contact you?

[@vdkarautoglassreplacement3642]

@@conociendolostiempos i mean depend how long takes the other tech. Do the jobs one oure its enough.to finish with no problems

[@conociendolostiempos]

@@vdkarautoglassreplacement3642 i see what your saying.

[@jameschapman132]

Your glass stand is pimp !! Please do a how to video on your glass stand

[@JustinSkaterLee]

Seems easy enough, makes me wonder why the shop I work at doesn’t do them

[@actioncircus1]

It's all about liability.

[@ilive41]

This is hard for a Tesla tech to watch. When you power off the car, you can’t then open a door without the power coming back on. The forward hood rests are threaded rubber, set exactly where they should be for even fit of the hood. Never pop them off. The plastic covers on each side are to be removed and installed with the rubber forward hood rest remaining where it is. Basically, take your Tesla to Tesla.

[@Xedilian]

You never wanna unplug the rain sensor bro. Just leave it pluged into the car eletrics and remove the actual rain sensor from the glass, more professional. saves the owner possibly going to the manufacture to get a computer reset. Happens sometimes, makes you look like a dickhead but it's easy to avoid

[@vdkarautoglassreplacement3642]

Uff ok good to know from a professional..i will try to dont looks like a dickhead...for the next and i will go with tesla dealers cause i do gobs from them and before doit i ask em for manufacture instrucción. And they said.just never get any soirce of power when sensor are unplug....so in this case they are the dickheads ..but i will take your advise..looks like you know more that the dealer and the manufacture manual...thsnks

[@Xedilian]

No i just mean you end up looking like a dickhead when you replace a windscreen for a customer, and they ask why their computer is failing and complaining about an error... All because you unplugged the rainsensor during replacement. Dude i've had this happen to me under Balron, even though manufacture instruction says to do it their way, doesn't always make it the right thing to do. It's a backwards piece of info but it's a good thing to know man. i didin't mean to come across as some kind of " professional " thing but it's what they do as a standard... Just to avoid that bit of embarrasment because usually w/e comapny you work for gets charged by w/e car manufacture you work on. I wasn't calling you a dickhead it's just my way of saying " looking like an idiot " but a little more verbal.

[@danielkeller6168]

Xedilian what do you do for the newer GM ones that has wiring go through the metal mounting bracket then? No way to get the sensor off without unplugging it on those.

[@fast97gt]

I've been installing Auto Glass for over 19 years and have unplugged EVERY R/S, and LDWS on every windshield I've ever installed if equipped. I've never had an issue EVER! Now, I have had customers call and complain about another shop that 1 or the other sensor is not operating correctly, and almost always the R/S is installed incorrectly, or not cleaned prior to re-installing. The LDWS sensor is another issue, most shops do not re-calibrate or have the incorrect software for that vehicle.

[@DG-xx5sc]

You work doing wholesale and everything cheap $125.00 allday??? labor w glue... all this install w tools, So many trucks dallas cheap running around American glass agd is pgw about to change in coming months i was told

[@gilbertocisneros85]

carros tan feos hasta para abrir el hood es eléctrico.

[@vdkarautoglassreplacement3642]

algo asi todo electrico ahora