Integra DA HKS Hipower

1990 Integra GS B18A1
Stock with type r headers, test pipe , HKS Hi-Power catback. Car has basic boltons.

[@HondaJazz808]

the lows and high tones sounds clean nice choice

[@pavelack]

thanks man i still have the car and she still rips

[@VarietyTipok]

​@pavelack I bought the hks for my da but its super quiet and has no wear close to the growl this one does, where'd you get this one if you can remember? Lol

[@fabricelaverdure2019]

Épilepsie crise mauricien 👍👍👍👍👍👍

[@holeshot1721]

Tanabe medallion sounds amazing on this car

[@TnigzJR]

love that sound. tryn to get my 92 to sound that low, the growl is dope! hks makes a pretty good exhaust

[@hachiroku6727]

Sound like f20c a little but it’s a freaking b series love the motor so much rev and it is and bullet proof

[@austin_94gt18]

He tried to go past that cop as quietly as possible 2:11 😂😂

[@pavelack]

No noise here officer

[@austin_94gt18]

@@pavelack 😂😂 Clean exhaust man. I'm glad you didnt go all Rice bomb. It sounds like a properly built tuner car. I am trying to get a 94 gsr.

[@pavelack]

@@austin_94gt18 thanks buddy, i indeed didnt want to cheap out, i waited 6months for hks to make me the catback because everything on earth for a DA is backorder. Pawlak_ on instagram if you wanna see the car

[@Nosloveingneko]

That's cool. Ive been having sound issues myself. I don't mind my system being loud but the complete lack of sound dampener inside the car makes it quite uncomfortable at times. I have that same thing going on with the mounts. Everything shakes,, and change on the dash bounces everywhere.

[@AjTheGoat115]

man this thing sounds awesome

[@pavelack]

thanks man i still have it 12 years later, and still worth every penny

[@acuraintegra8853]

Just ordered mine

[@pavelack]

Im still rockling it almost 10 years later bro

[@jasondavis7707]

I just ordered it tonight

[@chrisXDfull]

nicest sounding exhaust ive ever heard i shud get this on my DA

[@emmanuelp96]

Super clean sound bro!

[@ryanmartin5133]

I'm sold, great vid. Gunna get one for the Go-Kart

[@losv8415]

Good memories...

[@Den-Korablyoff]

Вот она, настоящая любовь!

[@pavelack]

thank you! i had to translate that!

[@Subaruwrxhiv]

Soooo clean. No rice what so ever

[@pavelack]

MinibikeMotoVlogs Thanks buddy, here is the car in question scontent-ord1-1.xx.fbcdn.net/hphotos-xtf1/v/t1.0-9/10391043_664736910321932_6380356829028851080_n.jpg?oh=a0834c1ff17dbcae809a45a2020a4453&oe=55E7AD2F

[@cravejdm]

That's so crazy. I have a very very similar video on my channel of my crx like that lol

[@pavelack]

I like your style

[@cravejdm]

@xPavelack thanks. Same to you. I love that style I just got done fabbed up a new exhaust for my 99 civic sedan it's the same style lol

[@pavelack]

@@cravejdm Loveit, i still have my DA its been almost 12 years now. shes only at 156xxxkm

[@cravejdm]

@xPavelack I wish I had my crx still it would of been about 15 years 😔 I'm going to be posting videos of my sedan soon.

[@gabrielsalasar153]

Que modelo es amigo de quiero poner a un cupra 1.8 turbo

[@gsub5886]

Very nice! Thinking of getting one for my 92 teg LS.

[@pavelack]

yeah buddy, you hear me clutch in and chill. scared the crap out of me! He was parked off on the right side and got off an exit before mine.

[@natepwns123]

And then speedbumb ! Where the fuck did my exhuast go?

[@pavelack]

its not so bad man, lower revs its really like discrete if you dont rip it, it starts to get loud (outside) at like 4k rpm and up, inside is moderate, i have track engine mounts also so my dash vibrates a bit with the car but you get used to it.

[@dattkidd.ryannn]

xPavelack what kind of exhaust can u send me a link

[@bradnaylor]

Man, that sounds good! :-)

[@blargslap]

nice man sounds real good! regards from New Zealand :)

[@pavelack]

+blargslap thanks man! the car is quite different now!

[@Shiestyfg2]

This sounds great🔰

[@randabuffer6562]

Finally one that sounds great 😎

[@Nosloveingneko]

There is a 1991 Integra up for sale not too far from where I live. Hoping ill be able to snatch it up. Not in the best of shape but ive seen worse. Also fantastic sound! Love the way it goes from low to high notes with such a range.

[@pavelack]

Type r 4-1 headers, test pipe , HKS Hi-Power catback. For the megapower i have no idea man

[@VarietyTipok]

How did you make the exhaust flange fit to the headers flange?

[@pavelack]

@@VarietyTipok i bought type r /honda flanges and welded my testpipe and the exhaust kit was bolton

[@kedzdacz988]

2.5 outlet and 2.0 inlet?

[@xiDaSHIZix]

It's that just the HKS muffler or full HKS exhaust

[@dattkidd.ryannn]

Great video I love it

[@StockishTeg]

Sound great!!

[@DodgerRocket]

You've got any full pictures of this car ?

[@mopower8219]

Is this the universal hks muffler or a specific one ?

[@Nosloveingneko]

Sounds better than my B18 swapped civic. How loud is it from inside the car?

[@Alpha-cr5cb]

Looks like DNA exhaust 2.5

[@shaherrafeaa8686]

thanks my friend for your response i have opel vectra a motor sport c20xe red top it hss 150hp i have same of your muffler and my the header 4-2-1 stock 2inch also my piping 2inch , without resentors very noise that stress on muffler loss of sound filter , the noise from the starting rpm to end it , i should add resentor in order to save the good filter sound without noise and i need from you show me or tell me what resentors shoud i install about kinds or size like your sound yesterday i insalled prospeed resentor i will update in in here to here that but i think that i need small of my resentors in order to be sound more up can i add 2.25 or 2.5 inch in my pipeng wituot noise thanks pro wiat your response

[@14sr20dets]

sound great!!!

[@pavelack]

Thanks man, definately worth the money and wait.

[@MrYELLOW94GT]

HKS all the way

[@xXx_sasuke_uchiha_xXx]

my lord

[@gabrielgarcia1468]

Awsome!!!!!!

[@ssjdavid]

How do you keep the deep sound in the top end? My muffler screams

[@pavelack]

Quality parts!

[@spoontl]

So you have a HKS hi power exhaust with a 2.5" test pipe hand welded? I need an exhaust for my GSR integra but I don't want one that sounds ricey. I want that screams in low tone.

[@pavelack]

Young TenTacion yep 4 to 1 header to a testpipe in place of the cat to the hipower catback. Perks of being a welder :')

[@Patrickeox]

That's hks hi-1 exhaust.

[@pavelack]

Love it!

[@VarietyTipok]

What test pip did you use for this?

[@pavelack]

it was made at a shop, just a pipe the same diameter of the exhaust and some honda flanges

[@VarietyTipok]

Ok cuz I have the same exhaust but mine isn't as loud as yours, like the purings quiet when driving too

[@xiDaSHIZix]

Hey man did you have just the HKS muffler or did you buy the whole system. Got a straight piped teggy and trying to get an exhaust. Would love any help thanka

[@pavelack]

full axleback with type r 4-1 header and test pipe

[@Kriiz95]

That cop at 2:10

[@DA9Darius]

Is the DA9 catless?? Sounds hecka good

[@pavelack]

Yeah, running test pipe after the header and straight back to hks hipower. I still have the car

[@mannymv93]

What kind of exhaust is this? So I can get the same :')

[@norcalpb]

And that my friend is why people should get their exhaust done by professionals

[@pavelack]

I can say it was definately worth the long wait and money I paid for, I did all the work on the car myself.

[@norcalpb]

Then you should fix the jiggling on the muffler

[@pavelack]

Dillon Hedrick its the play from the hangars and the camera vibrating, this video is also over a year old haha

[@afink20z1]

what motor?

[@ชายหล่านาดง]

Gooddddd

[@shaherrafeaa8686]

pls would you tell me how inch pipes you install in your system ? is there resentor in your exhaust system thank you

[@pavelack]

+Shaher Rafea'a the catback is 2.25", from the front to back its type-r 4-1 headers, testpipe, hks catback. I have the double small resonator model

[@Alpha-cr5cb]

High rpms I like it but not low

[@norcalpb]

The muffler shakes if no one got that...

[@TnigzJR]

Dillon Hedrick its the rubber gromets. theres nothing wrong with the exhaust shaking bud. if ypurs don't shake than someone welded it on and that sucks for you

[@uriellamere7596]

Does this muffler angle out to the side?

[@pavelack]

yes

[@asking123alexandria]

Hey do you think u can put a link down on where to buy this exhaust? I want to get it for my DA

[@spoontl]

here man www.evasivemotorsports.com/mm5/merchant.mvc?Screen=PROD&Store_Code=EM&Product_Code=HKS-3203-EX012

[@pavelack]

Stock b18a1 with bpu

[@wuntyme]

sound so sickk man, how much u got it for ? im thinking of adding t1r test pipe to my itr

[@pavelack]

+wuntyme was like almost 700$ cad like 2-3 years ago... and i had to wait a good five months for hks to make it for my car because it was obviously backordered for life. Worth the wait and every penny

[@wuntyme]

+sl4ppinb4ss3r do u still have it? canadian doller shit now days

[@pavelack]

+wuntyme sure do the car is full track ready

[@bennyboy6851]

I know this is an old video but what test pipe do you have? Thanks

[@pavelack]

BennyBoy i made it myself my friend, 2.5" like the kit with oem flanges. welder life :D

[@bennyboy6851]

xPavelack Oh nice haha, i was wondering because I want to recreate this sound on a B18C1 powered Integra

[@bennyboy6851]

xPavelack Sounds great btw lmao

[@michaelmilton8925]

I need a exhaust system for my 1990 integra ls 4 door. I've got the header(megan racing).

[@pavelack]

Ive had the car over 10 years now and still running this exhaust and still worth every penny even after exhaust tickets over the years

[@lukem8692]

This is fucking dope! Not rice what so ever please if you are a Honda guy spend the extra and get this and save out ear drums from those fart cans, I'm sure getting one for my mazda

[@darrenkrause6447]

what kind of Mazda do u have I have a slammed 2008 6

[@lukem8692]

+Darren Krause nice one, i have a 91 mazda mx6 currently fixing things on it

[@mesi707]

Where did you purchase this exhaust from?

[@pavelack]

the internet

[@mesi707]

xPavelack got the website? Or part number? Im trying to get one like this but the sites don’t have any pictures of what they are selling.

[@Helloidc]

Did you have the resonators on it?

[@pavelack]

Its 4 2 1 headers to testpipe and hks hipower catback

[@pavelack]

HKS Hi-Powwer

[@dc2014jhs]

Whats the name of this exhaust ? And how much was it? Would it fit a integra ls year 2000

[@pavelack]

HKS Hi power catback, look it up im pretty sure they make it for your model, i paid i think 700$cad ish for the system.

[@dc2014jhs]

Sweet do you know wher i can get this kit sounds legit.. i live in long beach CA

[@codygrant1025]

Diego Chavez They go for about 5-600 online !

[@DodgerRocket]

HAHAHA hilarious is this just the HKS Exhaust Tip ? you did your own piping ? what are the benefits of this against skunk 60 mm megapower?

[@kevingutierrez6844]

yo, so I know videos don't do too much justice as far as sound quality but this isn't bad at all... With this exhaust system does it give you deep low tones not too obnoxious? And when you open her up do you still get balanced sound between the intake and exhaust? Currently have a magnaflow in my DA9 and it just drowns the intake/engine roar.

[@pavelack]

yeah its pretty balanced, midrange you'll hear your intake a but and then the highs just rip out the back, it sounds race AF. the his car back is pricey though its the only downside

[@arbiebelisario7568]

is this universal hks hi power muffler?

[@pavelack]

no sir, this is the hi power catback for a 90 integra.

[@agboolaolomu6581]

Taxi 🚖 sma School bus 🚍

[@GamerTutBros]

What is that gold thing on the back of your car called? Where do I get one?

[@RabbitDogz]

Its called a tow hook and all the ricers have them. Theyre absolutely pointless for a FWD honda.

[@hondateg5497]

you can get legit tow hooks and if you do they will be a help when you are pulled out of a ditch if u so happen to crash in one

[@hondateg5497]

and rabbitdogz i dont know why you think there pointless for a FWD

[@RabbitDogz]

+HondaTeg54 That's not what I meant. a tow hook will work with any type of vehicle, I just don't see the point in putting a lot of power on a FWD platform, and you don't see daily drivers with tow hooks. that's why I said that

[@RabbitDogz]

+HondaTeg54 I guess I could've worded it better.

[@velvetx3847]

Inches out ? ('') and in (´´) ???

[@pavelack]

i dont remebber, its HKS Hi-Power catback and the actual pipe inner diameter i believe is 2.25" or 2.5" possibly, its made for this model jhpusa.com/products/hks-hi-power-exhaust-system-90-91-integra-rs-ls-gs

[@DodgerRocket]

You got an idle problem ?

[@adamcornell6738]

Typical IAC valve issue with Hondas

[@pavelack]

b18a1

[@edgarsantiago5534]

Needs to get pushed in but nice sound

[@edgarsantiago5534]

{:0 u noticed?

[@ObamaSaidHeLikesMe]

+Edgar Santiago lol u replied so quick...im actually impressed

[@ObamaSaidHeLikesMe]

+Edgar Santiago it does sound nice tho

[@RUS-qk7hz]

51 mm ???

[@pavelack]

Pipe diameter i believe is 2.25" its been 12 years 😅

[@RUS-qk7hz]

@@pavelack Sound Super me Nice :D

[@dominicmagana4723]

Hey did you tune your car after you got the exhaust on?

[@pavelack]

naw man the car at the time was running like that because the fitv was broke so i had to bypass it, it now idles fine

[@dirtyrottenpunk3668]

Idols too much in the beginning

[@pavelack]

Fermin Castillo The video is incredibly old,back then the FITV was messed up so it had a bad idle when it wasnt warmed up It also had a vacuum leak

[@dirtyrottenpunk3668]

Lies

[@dew000197]

+Fermin Castillo Fuck up

[@Patrickeox]

Sound like you have a vacuum leak.

[@rustybritches6747]

sounds nice!

[@thatloudCG5]

Bought this for my DA and sold the car but couldn't sell the exhaust. Now it's getting chopped and put on my CG5 Accord with some obvious refitting. The sound coming out of it will be an H22 and I can't wait to hear VTEC from it.

[@luiscaba7628]

What do you need to make your car sound like that in the beginning

[@scareyaf]

More like a toasted IACV