Рет қаралды 43
Morley DXC2 Fire Alarm Panel integrated with Access Control System - Testing by Manual Pull
When integrating a Morley DXC2 Fire Alarm Panel with an Access Control System for testing by manual pull, its crucial to follow specific safety and operational procedures. Here are some general steps to consider:
1. Ensure that all relevant personnel are aware of the test and any associated disruptions.
2. Notify the monitoring station or relevant authorities about the planned test to prevent false alarms.
3. Disable any automatic notification features if necessary, as pulling a manual call point will trigger a fire alarm.
4. Follow the manufacturer's guidelines for testing the Morley DXC2 Fire Alarm Panel and ensure that the panel is operating correctly before proceeding with integration testing.
5. Integrate the manual pull system with your access control system according to manufacturer instructions or consult a qualified technician if needed.
6. Conduct controlled tests by manually activating the fire alarm using a designated call point while observing how this interacts with your access control system.
7.Verify that all systems respond as intended, including door release mechanisms, notification devices, and any integrated security features related to access control.
8.Once testing is complete, reset all systems to their standard operational mode and address any issues identified during the testing process before returning them to service.
Always prioritize safety when conducting tests involving fire alarm panels and integrated systems - be sure they adhere to local regulations and standards.
#firesafety #safety #fire #firealarmpanel #firedrill #businesssolutions #emergencypreparedness #firesprinkler #electrical