Interceptor 650 Tubeless Rims Conversion For Only Rs 5,000: Way2Speed Kit Installation

For those watching a video of mine for the first time, I have a custom Royal Enfield Interceptor 650 that runs on 17 inch custom aluminium rims that are wider than stock.
And I have been wanting to convert them to tubeless from a very long time.
The safest, tried and tested option that I wanted to go for was an Outex kit. Outex does make a kit for the Royal Enfield Interceptor 650, however, that kit was useless for me.
Since Outex kits are pre-cut according to the motorcycle's rim's width, and my rims are wider, I could not use the standard kit.
Outex also does not do custom kits.
So, if I were to still insist on Outex, I would have had to buy two separate kits from two different motorcycles to match my 3.5 inch front rim and 4.25 inch rear rims.
Now, an Outex kit in itself is Rs 13,500. And buying two kits to mix and match would have meant Rs 27,000 for just the kit and Rs 2,500 for installation.
That is steep. I am sure you would agree with that.
And so, I was stuck running tubes inside my custom rims.
Until, Melvin from Way2Speed decided to help me out.
Way2Speed has come up with their own way to convert the rims to tubeless and it essentially entails you applying a solution on the rims and letting it dry out, sealing the gaps between the spokes and the rims.
The video explains it better than my words here.
The kit costs Rs 5,000 for a regular Interceptor or Continental GT650 but since my rims are wider, Way2Speed sent me an extra bottle to cover the surface and I had to pay Rs 6,500 for the kit.
Still, nothing in comparison to the Rs 27,000 I would have had to pay for Outex.
I've been using this kit for over a month now and have even done a 190 kmph run with them. The tyres have not lose any pressure whatsoever.
So, the kit has been working brilliantly for me.
Melvin told me that he has installed this tubeless conversion kit in over 20 motorcycles and none have reported any failure so far.
The one drawback of using this kit that I can think of, it is applied by hand, manually.
And that means, it will never be spread as evenly as the Outex tape. Which means, the wheel will never be 100 per cent balanced. Even though we will probably never be able to tell the difference, which would be minimal, it is still something that I thought I should highlight.
The long term reliability of this kit is yet to be seen. Since it is such a critical component, I am only laying the facts in front on you.
I am neither asking you to buy it, nor am I asking you not to. I can tell you though that it is working for me.
The rest is your call.
Melvin from Way2Speed can be contacted here for the tubeless kit: / way2speed
and [phone]
Needless to say, this kit is not just restricted to the Interceptor 650 and can be used on any spoked rim.
I hope you found this video useful.
Thank you so much for giving me your time. I hope you have a great day.
Cheers

[@abhinavbhatt]

I have been using this kit for more than a month and have not had any complaints so far. I have done 190 kmph too, along with riding the bike on some rough terrain too. If you would like to see more updates on this bike and my other motorcycles, you can check out my Instagram that gets updated with bike information on a daily basis: instagram.com/abhinavbhatt19/

[@ramitsarohavlogs7560]

its a silicon gel i think

[@vr46_003]

but bhai.. won't it create balancing issue in the wheels?

[@kookierulz]

Its a silicone ...use the Dow Corning brand.. that will do the same work as this. And its the most powerful silicon in market. I made my interceptor tyre tubless with it and 1 tube costs 220rs only.

[@abhinavbhatt]

Very minor. May not even be noticeable. Read my description. I have explained it there.

[@abhinavbhatt]

Wow.

[@shobinp5789]

i like how this guy just agrees to what the mechanic does and doesn't interrupt him.,

[@abhinavbhatt]

Well, the technician definitely knows a lot more than me. I'm just the guy who bought the kit.

[@tangetaier1783]

​@@abhinavbhatt hey mate, how is it performing.? The tubeless conversion I mean, and what if we need to adjust the spoke.? Or maybe even replace a single spoke.?

[@m80555]

I find your videos absolutely crisp, to the point and no unnecessary stuff..keep up the good work buddy ❤️

[@MotoSlug]

"Melvin doesn't want the nipples to be visible" - CBFC

[@abhinavbhatt]

😂😂😂

[@zub07]

😂😂😂

[@chaimasalatvx4007]

#freethenipple

[@ZaidKhan-cz4jd]

😂😂😂

[@Torquebeast650]

😂😂😂

[@SG-encrypt]

Good work. The only problem with these conversions is once you need recalibration of the wheels i.e. tightening or loosening of the spokes then you got to go through the whole process again which is cumbersome. In the long run its better to go with puncture resistant liquid which can be refilled incase of tyre change or tube change and it's very cost effective and a tried and tested procedure. It costs only 1000 to 1200 for both the wheels

[@rapoliit]

thats really helpful and well thought solution. thank u saurabh.

[@anindachatterjee1825]

Can u plz explain a little more how in long run it is better

[@SG-encrypt]

@@anindachatterjee1825 In emergency it won't leave you helpless

[@tangetaier1783]

​@@SG-encryptso in case of a pucture, we need to fill it with the tubeless pucture kit .?

[@adilkavina9421]

Bro this is a silicone tube which is available in the range of Rs150 to 500Rs depending on the hardness & use u can easily get it from any hardware shop get the automotive silicone that they use to stick windscreens , they have better heat resistant which will be needed to combat tyre heat generation of long drives. Another point that i read on other comments they have rightly pointed out that if you rebalance the weel & tighten the spokes it will definitely loosen the silicon grip, even then it's cool u can do this every 10 k kms , this is a grt money saving idea if u buy silicone tube from the hardware store , under 500 + labour 😢

[@dexterax6634]

Abhinav I think this is a silicon paste they use in houses to seal in tight spaces or anywhere to avoid any leakage of water. They are about 400-700rs per bottle

[@andrewcarnegie5342]

Royal Enfield should offer alloy wheels as an accessory because tube tyres can leave you in a pretty dangerous situation.

[@autoheadroy1140]

Somehow Royal Enfield has heard you! Thr next update comes with tubeless tyres and alloys!

[@aviroopdas400]

Tubeless tyres for sure, but with spoked wheels.

[@Strdyaftrnoon]

@@autoheadroy1140 wdym? When are they coming?

[@Strdyaftrnoon]

@@aviroopdas400 wouldn't that be costly af?

[@aviroopdas400]

@@Strdyaftrnoon as an option, those who are willing can get them.

[@RaxitD31]

It most certainly looks like silicone glue that is used to stick glass to the window frame. That is much cheaper. Around 200 rs for this sort of bottle I guess. The application and tool too is similar.

[@Lens_luminous]

I think you are right here, I had built an aquarium using silicone gel, looks exactly like that.

[@mmatania]

The sillicone and gun costs around 500-600 in hardware store. Just a rebranded generic off the shelf product.

[@guzzijack9714]

This may work for a low power bike like the RE, but rims for tubed and tubeless tires are different and doing this on a more powerful bike may just spin the tire on the rim. Tubeless rims will have "serrations" to grip the bead.

[@Car_Factory_007]

Wow....Abhinav Sir If this thing works....thn thnx to u. All interceptor owners going to save a lot of money who are looking forward for expensive tubeless kit🙂✌

[@abhinavbhatt]

✌

[@logicalindian_777]

This basically looks like silicone filling, like the way2speed is branding the silicon with its own branding.

[@sumitb15]

You are actually correct

[@knshobhin560]

Yh might be but we don't have other options. And i think something is also mmixed with that paste

[@najeemmanzoor]

hey it's silicon paste which is use join aquarium glass tanks &used in house roofing..which available at hardware/ powertool shops...which cost around 200-300 and higher..and the gun cost around 800 -900rupees

[@rajeev4243]

Like the way you made a simple and uncluttered video. Had got outex done formy Triumph Speedmaster rims. However in the last 1year it had to go back to the servhce centre thrice! One will know the efficacy only with about 3-5000 kms done on the odo. Suggest speak to the Manufacturer to understand how is this different from basic silicon which some here commented on. The difference in chemical composition (if any) will help people decide better

[@abhinavbhatt]

Sure. Will do. Will also make a follow up video.

[@SrinivasGanesh]

Inder is required to stay Indoor! But once this lock down is lifted, I'm gonna get these from my Tamil brother! Definitely want that tubeless-ness in the motorcycle super cool stuff this is! Thanks once again AB!

[@abhinavbhatt]

Hahahha. You and your puns.

[@Lens_luminous]

@@abhinavbhatt ain't it the regular silicone gel used in gluing glasses together...? I am not acting smart, just curious to know?

[@GaganSingh-zb9cr]

atleast there is one moto vlogger in delhi who knows about mechanical stuff in his bykes..keep it up bro baaki sab naale hai

[@abhinavbhatt]

Bhai, kisi ko gaali de ke kya faayda. Har kisi ki audience hoti hai. We always have a choice to not watch what we don't like :)

[@9chetanshetty]

This looks like a regular silicone sealant ! Good idea though ! But I'm not too sure about the longevity . I advise you to regularly check if the sealent is giving away

[@abhinavbhatt]

Sure thing.

[@jaswanths4326]

This paste looks like aquarium sticking silicone

[@Gondriman]

I think so , some kind of construction silicone paste.

[@streetsquiid5615]

Cause it is!

[@vijayrajmalhotra4879]

This is general purpose silicone caulk....no need to pay 5k for it...available in any hardware...the down side is each time the spokes have to be adjusted after "wheel out" u may have to rw do the entire process....just like the other 27k kit....so riders it's u r call However for silicone to make the spoke nipple hole air tight the following has to be followed strictly 1 remove all surface coats...paint powde coating etc...base metal to be visible 2 degreasing is a must 3 the surface should be highly polished and buffed because if u have to resilicone after rectifying wheelout it will be next to impossible to remove the old silicone 4 the silicone takes from a couple of hrs to semi harden...so either keep rotating the wheel slowly so that I he silicone doesn't flow to one side or lightly run teflon tape on the silicone to avoid flow.... Now u r done. Last step is to install a valve on the rim....all the best Personally I feel this is way to much of an headache....

[@manojpandhi2004]

Its just a silicon tube u can purchase it from market for just Rs. 200 - 300

[@ashwin9189]

Abhinav I suppose that material is like silicon glue used for making fish tanks and other utilities that Costs 200 buck a bottle??? I doubt your material is way too costly

[@abhinavbhatt]

I have no idea about silicone, man. I just went with what I was sold.

[@ashwin9189]

No problem Abhinav no one can take away your destiny just a couple of thousands are gone from your vallet but atleast we can caution fellow bikers

[@avtaraunta]

Silicon

[@krutikvapiwala]

After using this paste and sealing the rims , what happens when we have a wheel alignment done and the spokes are loosened or tightened?

[@kiranfelix5799]

We need to be redoing that...when we adjust the spoke .it either expands or compress na... so the normal setted glues will be loosened

[@sharadpanwar7]

It's better, you do the wheel alignment first then apply this thing. I used Anabond (used for engine gasket sealing) for front wheel. But it will be better you get it done by professional.

[@krn_5521]

Yes thats the point ...........👍🏼 At that tym it we have to remove it ......

[@sanjaysingh-qi6gz]

I mean damn! .. u r so passionate about biking .. u don't even want a 0.001% ususaul thing in ur bike m hats off dude.. u r a gem in utube..♥️♥️♥️

[@abhinavbhatt]

Thanks

[@tejhima8436]

Sir your videos are dope♥️.We need more videos in this quarantine time.so by seeing your videos we can pass all the time easily😊.stay safe

[@abhinavbhatt]

I have 2 more in the pipeline ✌

[@sharadpanwar7]

Brother there is an Engineer at Chandigarh who charges Rs 4000 per bike and seals the rim so that you can go for tubeless on Spokes wheel. He also have the set up to balance the rim but there are extra charges for it. And instead of using Silicone based compounds, He uses his specially formulated compound that doesn't deteriorate by chain lubes or oil or even heat.

[@abhinavbhatt]

Okay. Do you have any details of the guy?

[@ashishpalsingh]

Any good quality silicon tube should do the trick

[@chris5k132]

Yep, that particular glue is too expensive for me. A fevicol white glue should work too , right? I really think it would be able to seal properyly

[@moksha3042]

Fevicol is water soluble.

[@bharathraja7232]

@@chris5k132 you'll get silicon tubes in the hardware stores just like the ones shown in the video. That would do it! And Fevicol might not be recommended as it's water soluble.

[@TheRanand]

Silicon will cost around 180-200 per bottle and two bottles will cost us 400 -500 bucks that's it

[@govindsharma8846]

Yes I think same, and 150 for silicon gun

[@GOLDENOPTUS]

This paste is available for around 600 rs then why spend 6500 for same

[@ashishshah6951]

Mr. Abhinav nice video sir but u can achieve same with silicon gel u get at hardware store for 300 to 600 per bottle jut try of one may be some one can save there money thank you sir for you video.

[@abhinavbhatt]

Will see if silicone provides the same results.

[@kkhalifah1019]

Looks like regular silicone sealant, the kind you use to plug leaks. I know of BMW F800GS riders who use windscreen silicone sealant to do the same job.

[@sudhirkataria9958130]

***SCAM ALERT**** Guys please dont buy it,its 120 rs ""silicon sealant general purpose (GP)" YOU CAN easily buy it from near buy HARDWARE store.these people making scam.

[@way2speed]

Actually we used butyl rubber mixed proportional with polyurethane for keeping the integrity. It does look like silicone but it's 300% more tensile strength and pressure sensitive than silicone

[@sudhirkataria9958130]

Look whose talking...sorry for your knowledge.i cant help you god may be....wtf tensile strength hatts off its newton liquid not solid. Tensile strength for solid not liquid.bro its shear strength.. Dont making fool of people in the name of interceptor. I think you forgot to see the ingredients of GP..if you are the so called inventor i give you salute boss🧏‍♂️🧏‍♂️🧏‍♂️

[@way2speed]

@@sudhirkataria9958130 www.matweb.com/search/DataSheet.aspx?MatGUID=754a0c3d7c194965a0b369792855bfe4&ckck=1 read this well we wouldn't be selling something without doing research besides . we know the customers are smart and we base our products with theory , we don't want to disclose more info since its our proprietary and its getting approved by rubber board of India who helped us formulate and we are applying for IP for the same so . and to answer ur question u forgot this solidifies upon curing so i guess you didn't realize that . And since you seem to know it all you shud try "rs120 " silicone test it on and off road and give a feed back we will stop making this product !

[@sudhirkataria9958130]

@@way2speed bro 🤣🤣🤣🤣 wtf solidify....i cant help you ...what areyou saying. You dont know what is solid what is liquid and you are saying without knowing. First try to find what is solid or liquid..then we talk..do you have any knowledge or degree about chemical or mechanical engineering??

[@pankajborah24]

Try way2speed performance chennai. They sell it for 1/3 the price of outex. Happy riding guys.

[@therandom405]

This is the only video I wanted to see on the intercepter, I am sure reticent to buy it because of the tube tyres, saw another guy get outex on his, but that's super expensive! Thanks this seems like a viable solution!

[@anythinggoeshere6123]

I think you bought yourself a relabelled silicone paste worth rs.100 to 200 depending on the brand. Can be bought at any hardware store...

[@abhinavbhatt]

The guy who sold me this says this is not silicone. Silicone might do the same job though.

[@nklkhanna]

It's just a normal automotive sealant... Which is used to install car windshield. The only difference is that this almost transparent. But who's looking inside your rim?

[@ZaidKhan-cz4jd]

Ok i have some doubts :P 1) Is This still working fine? ( can i count on it if i go for a long ride) 2) Any more problems you found about it? 3) can i apply it to the stock tires of INT 650 (the earlier one u mentioned for 17k is expensive) asking because your rims are the custom ones 4) Custom version of INT650 has blacked out rims , do i need to clear off the paint like you did? waiting :)

[@abhinavbhatt]

1. Working fine 2. No problems yet 3. Yes 4. Probably

[@DidacticEditions]

Sealing the spokes isn't a problem. The problem is the dangers of the fitting of the tyre to the sides of a rim created for tubes.

[@vishalthakur5359]

Spokes loosen up easily over time and what if you want to change spokes.

[@abhinavbhatt]

Then you redo it.

[@eddyice2004]

Looks something similar to the silicon gel used for aquarium glass pasting

[@abhinavbhatt]

No. It is different, the manufacturer says.

[@ZRYDR]

Much awaited video, thanks for sharing..

[@leonwangls]

that just plumber silicon. Many people have used it before. it works

[@Pratik-qf9jj]

This must be a silicon I used it for my colg project where we used this for sticking hardner to our moto safe frame of aluminium ( Moto safe - our colg project , basically a shellter for bike which has track on which bikes front wheel get locked and bike can be pushed inside with hand ) I might be wrong be what I belive is they have just rebranded the bottel of silicon

[@way2speed]

PSC 9688 Actually we used butyl rubber mixed proportional with polyurethane for keeping the integrity. It does look like silicone but it's 300% more tensile strength and pressure sensitive than silicone

[@Pratik-qf9jj]

@@way2speed hey thanks for reply And clearing my doubt 👍👍👍👍 Appreciate that u replied

[@DevrajBhaskar]

man i dono but this looks like plain old structural silicone , can you please share the contents of the bottle . if its what i suspect is then the bottle is around 200 and the gun cost 300 at max . . . 5K for this !!!!

[@chris5k132]

That kit is pretty expensive. I wanna try with a fevicol glue lol. Might work

[@krisstravelstories7669]

Hi Abhinav. Great mods on the Interceptor. Question - Why can't we fix the valve part before applying the paste..? Won't a circular cut post application affect the integrity of the paste..?

[@abhinavbhatt]

Valid point. I don't know the reasoning behind it though. This is what I was advised by Way2Speed.

[@johngulbarga9913]

Abhinav sir I am a subscriber since first No doubt your bikes looks awesome R15 and the most awesome RE 650 CAN YOU PLEASE MAKE A VIDEO ON ALL MODS THAT YOU HAVE DONE ON RE 650 in one video With separate playlist on KZbin

[@abhinavbhatt]

Okay.

[@MrPrakash112]

I'm also looking for this dear. Your Interceptor looks damn good with those beautiful handlebars, customised rims and also the blacked out engine parts.

[@1forged_piston]

Hey man are you sure it's not silicon ? . Bcoz the texture and the bottle size is exact similar . And which is available@₹180 . And after applying it gets complete hard after 24 hrs . You can buy and check that out if it's works. Opinion: looks like the guy is doing rebranding. And selling them @5500

[@abhinavbhatt]

I've never used silicone. I am not sure.

[@evolvecustoms2188]

Dear Abhinav, brilliant sensible mods. Every modification on this bike is an absolute gem and have an advantage over the stock. The front shocks are great and effective in the overall bike's stability. I loved the 17" modified rims at the rear and the front. In order, to fit the 4.25" x 17" rear rim, did you change the swingarm, spokes and the hub? Also, what are the total number of spokes, in the rear and the front wheel? Thanks, Jorge Frois

[@michaellalremruata3187]

Sir, thats looks similar with the silicon seal, which i used to glue together the fish tank. I bought it from the local hardware store for Rs. 220 per tube.

[@roybapui4172]

nia tiro✌️

[@jaswanths4326]

A channel called Jake the garden snake has also done something similar to his FZ 07.

[@kpranay247]

I liked that more. Multiple layers of tape right?!

[@susu198215]

It’s normal silicon... what’s so special about it ? You can buy it form any corner hardware shop

[@abhinavbhatt]

Seller says this is not silicone.

[@chanderkeshdubey9911]

If Repair the Spoke Wheel and Change any SPOKE /WIRE than this solution damage or not working, may be again applying of THIS SOLUTION, its costly if you again & Again Repair the wheel, because on every SERVICE repair the wheel necessary, Kindly reply, Thank you for Your Informative Videos Sir

[@nismostrada9433]

What if we have to adjust the spokes for alignment of the rim ?

[@rtg_2023]

Coming back to this video after some time again, I have two queries: 1. What happens if you have to tighten your spokes as they may lose tension with time. 2. As a hobby I built aquariums with my father where we used silicone glue that looks exactly the same as what I see in ur case. They have been waterproof for 12 years now I have proof too xD. Coming to the point what is the long term effect (refer point 1)

[@abhinavbhatt]

I haven't had to tighten any spoke yet so can't say. And the person who manufacturers this explicitly stated this is not that glue.

[@rtg_2023]

@@abhinavbhatt I really appreciate that you clear my query everytime! Thank you! For the sake of complete information could you please put some light on tuning of spokes. This may be helpful to alot of buyers

[@abhinavbhatt]

I don't really know whether one can or can't to a small degree. Till we come to it, it is not a bridge I want to cross as of now. If I ever have to tighten spokes, will make a follow up video on it.

[@rtg_2023]

@@abhinavbhatt ok! Cheers

[@921CustomWorks]

looks some sort of silicon based gel.. "with melwins' secret ingredients"

[@___magic___fox___]

There is a bore kit for 650 twins as well. I know is can be a bit expensive but please give it a look. I believe its worth a look.

[@Daoharu699]

Disk break mast jain😁🤟

[@abhinavbhatt]

Stock hai.

[@Daoharu699]

@@abhinavbhatt Haa bro😊 Bro Ride safe Try safe🙏

[@Highways7]

I think this is the same material used to seal aquariums!! And they cost ₹250 only

[@abhinavbhatt]

This material is different.

[@sarathrajuissac]

Yeah, it is silicone sealant. If not, a silicone sealant should do the same trick. This should cost less than 400 including the gun. I personally use that for making fish tanks.

[@abhinavbhatt]

Silicone won't hold 40 psi, someone told me. This is not silicone.

[@sarathrajuissac]

@@abhinavbhatt Thanks for the info bro :)

[@patrickcattech]

You just sound like John Abraham....Ditto....🤩

[@arjunbabu6999]

No need of 6k ,it just heatresistant engine paste is enough which cost less than 1k for one wheel

[@preetpalsingh5624]

Sir jab spoks loose honge or spoks ko tite krne pr ye khrab ni hoga

[@rashidpoonawalla1203]

Abhinav where did you get the rims from, are they excel rims? I'm looking for the stock excel rims in 17 to downsize my rim and upsize my tyre..

[@subodhpatel1947]

Very good video Ab aap kitne kilometres chala chuke hai mujhe classic me karana hai ye success hai ya nahi

[@abhinavbhatt]

Main shayad 2,000 km chala chuka hu. No complaints so far. Aap lagwa sakte ho.

[@soumyadeepporel4323]

I think this is silicon glue which is used for making aquarium...But this is a good idea..

[@rahulsagar7320]

Basically it's silicon based sealant costs not more than 200 rs for around 250 ml & melvin's takes huge profit on it, Abhinav i didn't know you don't go to local mechanic's they must have been using this for a long time don't know about your city but my mechanic did it for rs 250 other than the sealant tubes which you can buy on amazon search for Dr. Fixit silicone sealant. Try that before you use Melvin's too costly sealant again next time. Thank me later.😊

[@abhinavbhatt]

Thanks man. I will give it a try next time.

[@abhishekkarumathil3074]

Whats the biggest size rim one can fit on the Interceptor 650 without the tyres touching the swingarm and the front forks?

[@dazzingdhanush]

Not Recommended. We have periodically do wheel trooving and wheel balancing to the rim. And what happened if u want to change individual spokes if it gets damaged?

[@1SnarfyDude]

What happens when you tighten the spokes? Does it break the seal?

[@souradip06]

RE : Let's develop a new smooth dual cylinder 650 engine in UK, let's put that on a beautiful retro-sport design.... And let's not give any tubeless tyre to it. Coz we're RE.

[@joydeepdas3272]

Bro it's silicone and u cost u about rs500 for 2 wheels

[@nexusraizer6440]

What abt when you're singel Spoke breaks/ need Allignment ..?

[@abhinavbhatt]

Might have to redo the process then.

[@shashimenon1000]

Hi Abhinav. Good one. I am inclined to do this on my Interceptor OEM rims. Guess it should work well (and remove puncture anxieties. Bombay roads are rubbish). Looking forward to your month later review. Cheers.

[@abhinavbhatt]

Hi Shashi. I've had this for over a month and I have no complaints at all. It holds air pressure just fine.

[@prs27]

This video is like a breath of fresh air for me... because Corona virus scared the shit out of me. Stay safe abhinav. Only thing im sad about is r15 speed run would be delayed becoz of this stupid virus.... Dang it !! 😏

[@abhinavbhatt]

Yeah. No R15 videos for a month now.

[@gineeshginu9192]

When you added some weight in wheel after that we are facing nee issue dynamic balancing . After add weight should be check the balancing

[@kotimoto]

What you are applying is high pressure silicone sealant, available for 600rs a can. At the speed you ride, an unbalanced rim will be very dangerous. This method does not provide equal weight distribution. I would avoid this.

[@abhinavbhatt]

My concern was balancing as well, but I could not feel any difference while riding. I hit 190 kmph too.

[@mayureshbhosale3353]

Hi Abhinav it is a great way to make spoked wheel tubeless but my question is even if you apply seal/silicon gel to cover the nipples, won't it get distorted after a while due to heat and continuous pressure applied on spokes and ultimately to the nipples?

[@mohdyunuskhan3215]

How was your experience after installing this product ...u have not given the feedback of this product ... And also not placed the video for that plz do so 👍

[@andrewcarnegie5342]

I don't think "nipples of spoke" is correct diction for spoke ends.

[@isingcauseimliving]

Allow us the folly Sir Carnegie. Its not without reason that we are the most populous race on earth. We see the beauty of the design. Such great imagination. And quarantine time....come on, you can give us that much. Oh and you dont need the choice of diction when you make it clear to most of your viewers what you mean :)

[@vloggingwithjoy.3290]

It's a normal waterproof silicone sealant which comes for 180rs.

[@andrewcarnegie5342]

Why didn't you choose alloy rims when you changed them?

[@brick-b-rock7485]

It can get damage in 1-2 years when you fill air in tyre if the tyre valve get disturbed air can be leaked

[@shubhambalki894]

Is this weather sealent ? Used to make aquarium and glass stuff

[@abhinavbhatt]

I've been told it is some butyl based sealant.

[@shubhambalki894]

@@abhinavbhatt what about summer extreme temperatures will it survive ??

[@ashitoshrawat6181]

Hi ! Abhinav, Thanks for the video its very intriguing. I have a request could give us a long term review of the same.

[@abhinavbhatt]

I'll try to make one soon.

[@claudedsouza2702]

You can get the same kit for way cheaper price Abhi, matter of fact this kit is used for making fish tanks

[@abhinavbhatt]

That's what most are telling me. The seller still insists this is not silicone. Anyway, what matters now is that it is working fine for me.

[@Avr05]

it definitely a far more practical solution compared to Outex. Moreover, Outex is expensive and is not available everywhere. Another thing that i have heard from people is that Outex at times has failed and there has been a leak. Further, if there is any failure in application the entire outex goes to the bin. In comparison Way2speed tubeless kit seems far easier in application and avoids chances of user error while installing the same.

[@lordsalvatore3846]

Long term review needed if possible

[@abhinavbhatt]

Working fine.

[@vikramb149]

It's good but I feel some alloy manufacturer should come out with the spoked alloys like Suzuki V Storm for Royal Enfield

[@abhinavbhatt]

Once this lockdown ends, I will do a video on my latest bike and the tubeless spoked rims on it.

[@vikramb149]

@@abhinavbhatt .... That's great

[@GOLDENOPTUS]

But you have done a good content on this much appreciated work so big like

[@suhailhussaina1385]

I think its just a silicone Then why do u have to pay 5000 or. 6500 for this ? Just for clarification Is it the same we use in glass materials ?

[@BRCBIKER]

Exactly so

[@abhinavbhatt]

Seller says it is not silicone.

[@suhailhussaina1385]

@@abhinavbhatt ok Thanks for ur response👍

[@Darvesh27]

What happens when you break one or two spocks... Wont it be better to invest some extra money and get proper tubeless wheels....?

[@santhoshar1785]

Brother can i please know more about the rear spoke rims 4.25 r17, also can i know where u have purchased it? Great video btw❤

[@gouravbijlwan4910]

Hi sir, Fan from uttarakashi, uttarakhand I appreciate your work sir, I really enjoy your videos and want to see more and more amazing content from you . And if you check my comment sir please make a videos on these topics sir,☺️☺️ 1- GPS top speed of your interceptor 2- those rims sir if you can get those as carbon fibre love to see that too❤️. 3-some more carbon on your bike like fuel tank, engine covers mudguards. Love you sir . Big fan, Gourav Bijlwan

[@alotlouder2892]

Ask dear Melvin what's the difference between Dow Corning weather proof silicone sealant (₹250) and his silicone sealant.

[@nidhishvp3066]

Well this is absolutely fabulous ..I had an very bad experience when my tire was puncherd I ride a Royal Enfield Himalayan ...well I have a doubt with this product what if there is a case where the spoke needs to to be replaced or the spoke needs to be straightened what can be done then?

[@dna6095]

Damn !! Melvin sent stuff in bottles to cover the nipples. Inder applied that stuff on nipples and it worked fine. Thank you so much for this video.

[@airfoil]

How are you going to true your wheels?

[@mdzaid5925]

Hey abhinav, if i am not wrong then major problem with spoked wheels is that they are flexible, and when they do so, tubeless tyres do loose pressure. I think that this is the reason why even big brands like triumph and honda do not offer tubeless tyres on tiger and africa twin. Can you please varify it by taking it on bumps and pot holes, with speed enough to cause some flex in the rim.

[@abhinavbhatt]

Okay. Will do.

[@mdzaid5925]

@@abhinavbhatt thanks 🙂

[@nilanjandebberma]

What if any spoke is broken and needs to be changed. I think thats a negative too.