International364, BD-154. PROBLEM FOUND

[@MrDanoconnor]

The Tractor I am working on has the same exact problem. That same Bolt was Siezed inside the Head on mine, as you can see in my video. thanks so much for posting all these videos, they have been VERY helpful to me. "Book 'em DanO'"

[@BillyBob-fd5ht]

I read a thin layer of oil on both sides of the head gasket, also put the lifters in when ready to torque so the center bolts are properly torqued for a secure seal,

[@federicochiribao5323]

What happened to me in my international 384 was that a pre-chamber where the heater and injector go was cut, the piece began to peek up from the piston and I spent my shirt, the rings and it burned oil, I had to make the pre-chamber made to measure because I spend the cylinder head and new ones are not found in my country. Greetings💪🖐

[@kennyfarley2968]

I have one need to fix the steering. Can you help?

[@jwmirz]

Explain

[@oozeboy228]

Exact same problem I just discovered on my bd154 same bolt seized and gasket broke same place as this one!

[@letseatpizza3763]

What is the head and valve torque on the head I had the same problem

[@جابرشفيرة]

عندى جرار انتر ناشونال 444فيه بستم خفيف الحل

[@tusharhole4781]

Same problem my tractor..... How solve this issue.....increase oil level engine...... 2nd no. Piston not work.........

[@john735]

The oil level went up because if a bad lift pump. Gasket failure because it was not sprayed with sealant before installing causing it to burn out.

[@tusharhole4781]

John thanks, I will check lift pump

[@tusharhole4781]

But head is be ok.....? Because one time i disassemble (open) engine then i found burn gasket..... I change it but problem is not solved......

[@john735]

Feel free to ask me any questions. I'll be more than glad to help you out

[@tusharhole4781]

Lift pump excepted any problem in engine went to the oil level increase......?