Internet & Manual Home Automation using New Blynk 2.0 with Fan dimmer and Realtime Feedback

[@VarunDongreskymydream]

Great efforts ... Please add alexa functionality too in the same project. One more feature that can make this project the ultimate home automation is to add an IR transmitter to control IR based appliances like AC, TV, and sound bars. Please work on that aspect too...

[@SekharRoy]

Hats off. Thank you very much for your wonderful videos.

[@skyrctechie]

Nice project 👍🏻. No need to be doubted. Yes, we want to see how Google and alexa integration works with blynk2.0 .

[@Angel_ways_1122]

thanks for project. sir can i use also ir remote, Bluetooth, humidity, temperature, and energy meter . when you can yes . so please build this one project and also light dimming. i m mad for this project

[@drelectronics13]

All things aside but providing said and pass is the best thing😍

[@danishbhai5920]

Good project I use same circuit but the manual fan regulator speed 3 is not working both the relays for speed 1 and speed two are have to turn on but they were flickering otherwise all switches and fan speed working fine thank you

[@praannetwork]

Do make a video on IR controls as well and RFID controls. I really want to make use of something in that section but there is really no clean guide to get me through

[@47__rahulpachori79]

what will be the range ??? to control from phone

[@rohanbarnwal5940]

Sir which USB hub or otg cable You use to program Arduino or NodeMCU please help me out its a huge request please help me out

[@Rilhassan]

This project not memory function, after power cut,this system reset

[@rahulviswanath7916]

Great job. if the board get power off manual switches will work still? You didnt explain the schematic circuite diagram. Coz the most of the people wants to know how the manual switch works in off line? it would be appreciate giving reply for this

[@techiesms]

No If the board gets power off the switches won’t work

[@gouraviki]

Wonderful work...lets take a step further...integration of alexa/google assist along with blynk 2.0 ☄☄

[@B_learningalways]

sir i have a question who will esp8266 know the real time status of Switch whether its ON/OFF which sensor is used to analysis the real time status please do guide us

[@AnasKhan-in3wu]

Your projects are Very helpful. Can you add temperature. humidity. & IR or any remote. & controlling a fen by temperature UP-DOWEN....🙂

[@chintanbeladiya1058]

Inspiring as always!!!!

[@techiesms]

Thank you 🙌🏻

[@techandtoys2055]

Please make a video on Blynk with Alexa integration

[@parthi761]

Can we make using tuya IoT app?

[@duinoblogtube2070]

hello from Morocco ♥♠♣

[@kamalkannan56]

Do we have technical support center for this product from your team after the purchase and installation of this product

[@mohithreddyvuyyuru]

Wow it is really awesome project

[@Angel_ways_1122]

Great project. sir please add IR in this project

[@shock2k3]

could you please add wifi reconnecting program.

[@meanonymous1000]

Add the functionality to save the pin status in external SD card during reboot and retain them after restarting through mesh in home.

[@tanmaywho]

Which relay are you using and if you have tried them before, how your experiance.

[@kannank-jg1lq]

Hi, can you please clarify how do we get support assistance for this product after the purchase of this product

[@nitesh4505]

Nice one 👍

[@Prabhagaran17]

Do a project for watering plants in garden as like all in one

[@kasidmollah7072]

Yes sit

[@67omkarwaghmare28]

Excellent project sir

[@After5Gardener]

Thanks for sharing..but your page not found sir..

[@akshumon6988]

Didn't understand the 5 pin dimmer connection. In Bangladesh we use two cable connection which is use like a switch. Pls provide detail connection system

[@AIlipu]

Pls make a project for watering plants

[@G-Vecom]

come on google assist very DOPE bro

[@yogendrajamsariya1193]

Yes we want Google and Alexa tooo. ❤️❤️❤️❤️❤️❤️❤️

[@TechieVJ]

Hi, I am not able to connect my router/mobile hotspot to ESP32, but when I uploaded WIFIScan from examples menu, it is working fine (scanning all the available wifi). Brother please suggest what can I do. Tried all things available on Internet.

[@aotrakstar]

Since you're shipping to India alone. Cam you make schematics available so outsiders can order theirs from jlcpcb as well?

[@PiyathPamuditha]

Inspiring as always! Can you made this tutorial for HomeKit too? Much appreciated.

[@puneetjain1982]

How should i design garber files

[@akshathkumar4960]

Please send the Gerber file of the pcb

[@samiranDuttavlogz21]

your project is Awesome!! I have a question.. Can I use ttp223 touch sensor instead of manual switch .. ? I am waiting hear from you!! Please reply ASAP!!

[@techiesms]

Yes But the code will change little bit

[@samiranDuttavlogz21]

@@techiesms thanks for your reply, can you please provide me for 8 ttp223 touch sensor.. i am operate this with Alexa and ir remote..

[@Angel_ways_1122]

@@techiesms please sir how i do it. one more video

[@shanmugamm5666]

Brother, Could you share the Gerber file link of this Home Automation Schematic. That would be really helpful for the learners like us. Thank You!

[@curiouskitchen8966]

Can you make a project on home automation circuit with tasmota that we could control from anywhere from the world while being on different wifi connection. Because tasmota provides more features such a custom voice control and password changer in it.

[@smartteg7381]

Correct place for automation bro we can't wait for Google and Alexa assistant

[@awewonodesmond8901]

Pls am student,I would like to learn hw to do the coding n install but am from Ghana, please is there any help

[@sheminasalam]

I have seen the circuit diagram and I have a doubt regarding the fan speed controller. The fan speed is controlled by 3 relays of which two are connected to two different RC circuits and the other is directly connected to fan for full speed. What will happen if all the 3 relays are simultaneously on?

[@Angel_ways_1122]

in one function two relay work together

[@akashpawar3722]

Blynk app showing error like as : led was't online yet pls give suggestion

[@mddanish3837]

WiFi automatic connect?

[@khookengsuen1428]

woah, you're using free plan too? awesome video for us since majority of us are broke haha

[@TUICBADRIGOPALABHARATAYYAR]

Sir kindly do make a NAS using a ESP32

[@Dinzcookingway]

Bro, make new video useing apple homekit, alexa, and google assistant and new blink.u are the best of best for esp32 and node mcu, thank you

[@kevalparmar6586]

ws2812b led strip control with this project..

[@vishalchetry4553]

Please make the same project using esp8266

[@yeshwanthbalu1965]

code is not working bro page 404 error

[@internetofthings6526]

Can U teaches me How to conect app blynk 2.0 on Proteus by arduino ? Please help me

[@harshpatel4198]

can we make our own Air condition controller.

[@akinoye]

Yes

[@ajishkhantm6147]

Bro nice project , please make a home automation using esp32 with Amazon Alexa app ,blynk 2.0,ir and manual also with fan regulator

[@unbreakabledesire14]

Sir the code and diagram link was not opening....

[@obscurastudio5706]

If the board didn't get the power supply still the manual switch will work?

[@rahulviswanath7916]

i have the same doubt here because the physical switch have no connection with appliance . 220V Ac is connected between relay

[@vishaltejwani940]

no it wont work as relays are triggered by switchs if you modify the diagramand add 2way switch to it then it will work

[@HeshanGoonawardena]

I get this when I compile the code, "Preferences.h: No such file or directory"

[@umeshsharma5676]

Sir the code link was not opening ....

[@mosesbinzi339]

You are fun to watch... Can I use the tt-go t-display esp32 board in place for the one you are using?

[@desmondchiemezieugwuanyi8197]

Yea

[@akinoye]

@@desmondchiemezieugwuanyi8197 I need where to get these components in Nigeria

[@technicala.s.k786]

Plz give the gerber file of this project

[@flash8050]

pls make home automation project with alexa and google home with blynk 2.0

[@sahalkt6631]

Please add 5 speed regulator control

[@gleysonbonanidepaula8202]

Projeto top, você falou que blynk2.0 integra com alexa, já estou ansioso para esse vídeo.

[@iiestamit]

Unable to purchase this item. On click on "Place order" , showing this error message " You do not have permission to perform this action ".

[@techiesms]

Please connect with us on instagra We will guide you there Our handle is @techiesms

[@mdtabrejaalam6672]

Esp32 factory reset kaise kre sir android phone se

[@ashutoshranjan3363]

Yes Please do it with Alexa.

[@rikmondal2146]

please give the github link for code

[@mdntech8160]

bro can you do fastest line following robot

[@ponnalasandeep5389]

Are u from Hyderabad

[@prayerhub8425]

Bro actually if iswitch off the wifi suddenly the light also turn off bro

[@omkarkardile6071]

Gerber file?

[@danishbhai5920]

Please make blynk 2.0 with google home and alexa home automation project

[@mithilpanchal6901]

Sir plz make a Home automation project in which we can give commands in hindi to assistant

[@techiesms]

Alexa based project works on Hindi commands as well Like “Alexa, desk light chalu krdo “

[@mithilpanchal6901]

Thank you sir

[@TechMechRobo]

Sir, Very interesting project but as usual you provide Gerber file, Please share Gerber file so we can test this project by ourself, sir but the problem is that you used 3 relay for fan control i think we have to think about it, because it's totally waste of relay. Sir provide Gerber file so i can work on it and think how to upgrade

[@shivam000]

bro also make BLE-based projects as most of us don't have a wifi router at home.

[@sujalvasoya9330]

Yes sir want

[@omkarkardile6071]

Pcb file?

[@TheSwapnilmahajan]

Can you give me a complete project for me personally please give me....

[@Innovation_king]

Pls make a project about Apple Homekit...🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼

[@ashvatthama3dhub588]

Sir this project next time tasmota Home assistant control system

[@amritkumar2859]

Blink 3.0 with the use of contactors running heavy appliances having 16 channel

[@amritkumar2859]

Hope you read the comment

[@Zohaib.S.H.K]

Nice work please upload garbr file

[@Zohaib.S.H.K]

I'm still waiting for your reply

[@satishsmp4154]

Do a project using raspberry pi and argument reality

[@itsaldrinsamuel]

12:07 PLEASE MAKE THE PROJECT YOU MENTIONED IN THE VIDEO. I AM WAITING FOR THAT PROJECT FOR LONG TIME . AND PLEASE DON'T DO IT WITH PCB PLEASE GIVE A CONNECTION DIAGRAM WITHOUT PCB THANK YOU

[@aakashdeep7089]

Try Alexa and Google

[@bilalkhan-zk9hw]

Yes make with alexa

[@techiesms]

kzbin.info/www/bejne/qXObe5uNo9-eirc

[@rustamkureshi8246]

make with GOOGLE ASSISTANT 💖💖

[@sanghamithrasuttoori]

Alexa 😍

[@shareforothersnotpersonal3210]

I have a (mega 2560 + esp 8266 onboard)I need to control 16 relays as ac appliances switch Could you please help me with the code? There are no English videos on youtube with detailed information as simple as your creation. A simple detailed useful project will be appreciated.

[@srinivasmurthy751]

Want this board please sell in your website TTGO T-Call V1.3 V1.4 ESP32 Wireless Module GPRS Antenna SIM Card SIM800L Board

[@shanthavela3882]

Please PCB file downloading please send

[@rahul122424]

Sir very poor design. You Used 3 relay to control a single fan? Should use any other method like zero cross or other.

[@karanparve1734]

❤️

[@smartteg7381]

Bro I think you are bigger than 1 video a week

[@madhukeshnp]

Keep your void loop clean. The code will definetly crash.

[@Frustratedraiders]

I need you for programming ma products., It's from a automation company revert me back

[@aotrakstar]

Since you're shipping to India alone. Cam you make schematics available so outsiders can order theirs from jlcpcb as well?

[@TechnoSAP]

👍👍