Internet & Manual Home Automation with Fan Dimmer using ESP RainMaker 🔥🔥

$2 for 1-4 layer PCBs;PCBA from $0（Free Setup, Free Stencil）: jlcpcb.com/DYE
jlcpcb.store/
Buy this Complete project Right Now!! - techiesms.com/product/all-in-...
This is the most awaited Home Automation project that you all were waiting for which is, All in One Home Automation project with fan dimmer using ESP Rainmaker that will work with Alexa, Google Assistant and Manual Switches along with it's realtime feedback.
And in case their is not internet connectivity, you can still control it with manual switches and manual fan regulator. Amazing isn't it??
To try out free trial version of Altium, click here - www.altium.com/yt/techiesms
Get the best quality components from Octopart:
octopart.com/
__________________________________________________________
👨🏻‍💻 Important Links 👨🏻‍💻
Getting Started with ESP Rainmaker - • Using RainMaker with A...
You can buy this complete project with all the components already soldered not the PCB along with ESP32 already programmed - techiesms.com/product/all-in-...
Code, Connection diagram and all other details are updated on this article - techiesms.com/all-in-one-home...
ESP RainMaker Android App - play.google.com/store/apps/de...
ESP RainMaker iOS App - apps.apple.com/us/app/esp-rai...
__________________________________________________________
You can buy the merchandise from here,
techiesms.com/merchandise/
__________________________________________________________
Buy the components for your projects and support techiesms💡🔌
ESP32 Dev board - techiesms.com/product/esp32-d...
HiLink 5M05 (5V 1A) - techiesms.com/product/hi-link...
__________________________________________________________
⏱ Time Stamps ⏱
00:00 Introduction to complete project
01:54 Hardware Part of the project
03:07 You can Buy this Complete project Ready to be used!!
03:41 Coding part of the project
06:45 How to use this project
07:46 Installing the project in switch board
08:18 Testing project with ESP RainMaker app and Manual Switches
08:47 Testing it in Offline mode
09:23 Integrating RainMaker with Alexa
10:04 Integrating RainMaker with Google Assistant
10:40 Testing the project with Alexa and Google Assistant
11:13 Ending part
__________________________________________________________
🎥 🎙 My Video Gear 🎙🎥
Camera - Canon 750d
Lens - 50mm f/1.8 STM Lens (amzn.to/32gqnsi), 24mm f/2.6
Key Light - Godox SL60W (amzn.to/3522mHe)
Fill Light/Back Light - Osaka Lightning Setup (amzn.to/2I5cdDi)
Tripod - amzn.to/3uNhC4H
Microphone - Zoom H1N(amzn.to/3Osh12A)
Editing - Final Cut Pro X on MacBook Pro ( amzn.to/3vHcSyJ )
__________________________________________________________
Get connected with techiesms everywhere..
Subscribe Main Channel :- bit.ly/techiesms_youtube
Subscribe Shorts Channel :- bit.ly/techiesms_shorts
Facebook :- / techiesms
Twitter :- / imtechiesms
Instagram :- / techiesms
Website :- www.techiesms.com
Telegram - @techiesms
__________________________________________________________
techiesms
explore | learn | share
#ESP32 #ESPRainMaker #HomeAutomation

[@techiesms]

You can buy this complete project with all the components already soldered on it along with ESP32 which comes preprogrammed along with it's user guide - techiesms.com/product/all-in-one-home-automation-project/

[@alexandrefernandes7186]

Schematic please

[@azanshahid2475]

@@alexandrefernandes7186 c pl

[@Saifali-tu1ik]

Hii, There is 1 problem in ur code we can't use Alexa/Google to control fan speed , To solve that, i found u need to replace "level_param." by "speed." And also "custom.param.level" by ESP_RMAKER_PARAM_RANGE in void setup Now u can control speed through alexa.

[@bacchaparty3842]

@@Saifali-tu1ik it's not work

[@Saifali-tu1ik]

Email me ur code

[@Autoloveindia]

you are so underrated man , your just awsm , doing best then other country techi

[@InnovateTechLab]

Great job 👍👍👍

[@arunsp4576]

Awesome Bro

[@bujji1990]

Hai bro your projects are awesome i followed every esp project by you only I have one doubt my added to Google home all lights are switching on but how to control fan speed by Google assistant

[@ayushgupta281]

Thank you so much, I’ve used your code and everything worked perfectly, connected google home mini and alexa together! There’s one thing that ESP Rainmaker goes offline after 3-4 hours of use, happened twice since yesterday. If you know the cause then it would be awesome ☺️ Thank you again

[@raghuc6352]

Thank you so much! your all videos are very useful, Pls add timer function with this esp32 rainmaker products(particular time set for ON/Off control the relays)

[@smartteg7381]

Best project always, bro please local internet control we need that

[@hajeevanselvanayagam9722]

Awesome Brother

[@saurabhgoel6725]

Educational and nicely explained 👍🙂 If possible create few videos on Kincony products like KC868-E16S with rainmaker.... it will be awesome

[@drelectronics13]

You are Sonu Sood of iot projects❤️always helping others🤩

[@techiesms]

Thank you buddy ✌🏻 I would just say Just keep sharing And keep supporting

[@shanijagatiya9675]

Yeah you r right 👍😂😂

[@dienthongminhesmart]

Thanks your sharing!

[@techiesms]

My pleasure!

[@rohitmobilecare7691]

Great 👍 sir you are working very hard Thanks for your appreciation

[@techiesms]

Just keep sharing and keep supporting

[@vipinvg2048]

It's work on Siri? And one relay can we can use as a single pulse signal( latching in sonoff)

[@mairimbencomo2788]

Really great, one question, would you go for at least a short video on how to implement BACnet protocol into the ESP32? Thanks

[@scienceoftheuniverse9155]

Thank you so much indeed. We always appreciate your great effort. Your content is always superb. We hope to see local network control. Thanks once again.

[@techiesms]

Thank you 😊

[@kevalnakar6269]

Do you mean using wifi Direct or hot spot - wifi pair

[@scienceoftheuniverse9155]

@@kevalnakar6269 I meant using only wifi without internet.

[@kevalnakar6269]

@@scienceoftheuniverse9155 yes it is possible, you have to make your own app ( mit app inventor ) Videos are there on KZbin for that

[@scienceoftheuniverse9155]

@@kevalnakar6269 There's function for only wifi in the esp rainmaker docs but I don't know how to implement that yet. I am still making some trial and error maybe I will get it work.

[@mdomarec-0763]

Amazing thanks for making sir 🙂

[@techiesms]

Keep sharing, keep supporting

[@anokhautomation4453]

Very very interesting project 👍👍👌

[@contalivreemaberto1385]

Excellent very educational video. Could you please make another one with the thermostat function. With DS18B20 and also with DHT11 I thank you in advance

[@techamigo123]

Hi, can u replace the switches with touch sensor??

[@anilkumarmaurya5388]

What a brilliant project, but what will be condition of program if power failure occurs ? Will this coding will help in remembering the last status of switches and relays?, if not ,please make one video ,i.e how could it will be possible,and thanks a lot, it is one of the best project

[@musaumargaladima2154]

Wow 😍

[@sunilpallikkara]

Could you please help me to stay in the last state when power resumes after power failure in the ESPRainmaker sketch?

[@entertainmentknowledge6655]

👍 For your effort

[@techiesms]

Thanks for liking

[@lucianoaraujo06]

Hello, I don't have the status in ESP Rain Maker when I turn it on and off by manual switch.

[@techamigo123]

Can u add touch switches for this project..??

[@aryanpandey4891]

why you have connected a 10k ohm resistor to every switch in the circuit

[@Techcommunity360]

You are the best, please can you make it to also work with Bluetooth

[@arkamondal13]

coding ,connection diagram part is not found in the above mentioned link. please update it.

[@smartteg7381]

Hi, please can you show as where to write the local internet control code

[@yedukondalumidde1900]

Hi sir excellent project your explanation very nice I will meet you soon 👍🙏

[@techiesms]

Always welcome

[@sangamsaumya4123]

Bhai aapke pas Bahut knowledge hai is field ki aap please ise share kare taki kam se kam jo middle class boys v kuch sikh paye but aap to knowledge bech rahe ho KZbin to paise deti hi hai aapko

[@TECHTHE33]

I have a problem When I'm trying to upload the code to 5he esp32 it says sketch too big how can I solve this? Thank you for the explanation in the video

[@techamigo123]

Hi bro can use add this on touch function??

[@Saifali-tu1ik]

Good morning, is it same to control custom device slider parameter as of fan device??

[@techiesms]

Fan device has it's own slider parameter in it but that comes with 0 to 100 range hence I added a custom parameter in that

[@BlackwingzYT]

I'm not able to control the speed of the fan through alexa app.. Any solution for that ?? Alexa says "the fan doesn't support that"

[@Saifali-tu1ik]

Hii, There is 1 problem in ur code we can't use Alexa/Google to control fan speed , To solve that, i found u need to replace "level_param." by "speed." And also "custom.param.level" by ESP_RMAKER_PARAM_RANGE in void setup Now u can control speed through alexa. By the way thanks for providing video on this topic.

[@rikmondal2146]

Will esp rainmaker work with nodemcu?

[@SunilKumar-fo7ej]

Bro fan speed control using alexa and Google not working tell me why solve this ,those app nor showing speed slider options

[@arunsp4576]

Bro I'm getting error text section exceeds available space in bordsketch uses 1802493bytes(137%) of program storage space.

[@kashifmahmood3803]

Thank you for sharing. Do you also deliver it abroad. Furthermore, I really like your square cealing light, do you have an what are they called?

[@kashifmahmood3803]

btw can i connect the device with home assistant instead of rain maker app?

[@sharukhrahman7925]

hey can you provide a gerber file for this project. im a guy with cs background and now learning electronics.

[@Javedansari-yl6ts]

hello sir excellent project your explanation very nice.. i have three question please explain me ...1.. esp rainmaker work with esp8266 or not 2...can i use esp32 with sim800l module for internet connectivity and also use sms or call command for relay on off. 3.. and also i want know if wifi is not available. that time esp32 will work with bluetooth and manual or not and if available it will work back with wifi and manual. i want create bluetooth local area connectivity when is not wifi connect or avilable.

[@engineerskranti]

Sir Make next Video on, Build Your Own Google Home + Alexa Smart Speaker

[@sensordhanaraj1327]

We can't find any code on ur description sachin ji. Please provide.

[@manotoshmandal9841]

I want to buy this project only coded ESP 32 module... Please reply 🙏🙏

[@chiszmutez]

Hi,how if i don't want to use manual switch??which code that i should erase?because i want to add some code for control with bluetooth too

[@techiesms]

Acebutton code That is responsible for manual switches

[@LedPixelAnimator]

Bro fan speed control using alexa and Google not working tell me why solve this

[@Bikram3458]

is it possible to run rain maker in esp8266 board

[@saklogaming271]

How to add fire sensor with buzzer alarm

[@shubhamsen4572]

Great videos series coming now.... Can you dive , just for one video...into the implementation of same project using ESP-IDF (embedded C) ? As for development of marketable products, we can not use Arduino. Also integrate , 2 dimmable light points also.

[@techiesms]

Sure...

[@sudiptasarkar3422]

can you tell me about marketable products & why we cant use arduino?

[@Premnishad1207]

brother where can i buy home automation circuit

[@soumadipdas2291]

Code and diagram article link not working

[@ManojSingh-xr6cz]

Please make a video how to save data in EEPROM and make perfect automation project. Because no-one want to switch on after every power failure 🙏🙏🙏🙏

[@iystreem186]

Is it possible to use 16 channel relay with this I have a room with a lot of lights and I need at least 16 channels to control all of them

[@techiesms]

we will try to make that as well in future

[@asmorodronenow]

how to create push button like door bell sir? thank you

[@vikasbarge4279]

What happens if you turn on light using manual switch, then you switch off using mobile app...and then disconnect wifi...? Does the light turns on again, bcos manual switch is in ON position??

[@techiesms]

It stays as it is

[@mirajhossain3783]

I’m from Bangladesh .. I want to know details on node red.. how is it possible? what can i do for watching your private video on node red

[@ritikpatel5360]

Can I use esp 8266

[@Mohit56956]

Hey bro can you make Electronics course?

[@shashankbharadwaj9810]

👌👌

[@marcarleto79]

Very thank you for this video man, but I have a question: I plan to use esp rainmaker for profissional use, so can I change the rainmaker app visual, like putting the company I work logo, theme, etc? Imagine our costumers using the app, not me. By the way, it's possible to change the language too? I didn´t find anything related at the app.

[@techiesms]

Customers can reach out to [e-mail] to get quotation. Pricing is different for different devices and models.

[@futuretechgyan1194]

Dear sir, I am getting an error "error in changing user role "during add device through barcode scanner please help

[@lazarorei]

Good evening, could you sell the pcb project for example because I am from Brazil, then I would have it manufactured, project with .ino manual and layout for pcb

[@TechTamilIOT]

Contact me

[@iamrafic]

Gr8 Project bro, does it retain the status of the relay if power goes off to the board and back ON?

[@techiesms]

It doesn’t But you can add program for that easily

[@iamrafic]

@@techiesms thanks bro, will order one PCB, any combo offers is we order multiple PCBs together? 😊

[@techiesms]

We are not selling PCBs We are selling the complete project

[@iamrafic]

@@techiesms My Bad, any combo offers if we buy multiple projects?

[@explorerpragun431]

@@techiesms Make A Video On How To save Data Or how To use Eeprom Please

[@FrancisFramil]

Sir plz can you share the Gerber file of your pcb

[@ulhasrane3656]

create example tutorial with esp rainmaker javascript based rest api and user management

[@niloymondal1826]

When the Electricity cutt off can it save the previous state ? like eeprom memory ?

[@techiesms]

No but you can add that program in the code

[@dhruvjain302]

Switch State does not resume when there is power failure is there any way to do that also?

[@techiesms]

This one has that feature - kzbin.info/www/bejne/bmi0mZ2Hqc1gprM

[@chetanparmar-vf4qr]

bro plz proved GERBER AND BOM CPL FILES so can also try this

[@Dexter.lab2019]

Is it posible to connect multiple esp32 in 1 dashboard? Like the one we can do with blynk iot. Thanks in advance.

[@techiesms]

You can see all the buttons on the same dashboard but you have to create different nodes for each ESP32

[@smartteg7381]

Hi 👋 Bro can you use rainmaker app to set up sonoff devices Because in the video, on your brother's phone that you shared the project has some sonoff device on it

[@techiesms]

It was just the name of the device not the actual sonoff

[@danishbhai5920]

Great project bro but I have a problem when I upload the code to esp32 it shows the sketch is to big for esp doit dev kit v1 can you please help in that?

[@techiesms]

You have to select ESP32 dev module in the boards and in the partition scheme select RainMaker and then upload the code

[@mytube1000javed]

Hi. Your projects are brilliant. But I can't understand why one would go around the world to just control a light bulb or a fan. Also, it increases the carbon footprint. Is it not foolish to let Google know which bulb or fan you are switching in your home?

[@noelk6990]

The fun comes in when you integrate all the devices in a room or a full building. Suppose you have home theatre which has floor lights,roof lights,projector,AVR,DVR, subwoofer,AC.... and many more. When you integrate all of the devices, you can just simply say "Alexa welcome" which will turn on all devices rather than turning on every switch. Also while watching a movie if you want to reduce the temperature,you can just say "Alexa temperature 25" ,which helps rather than turning on the light and changing the temperature by pointing the remote to AC. For the security reason they have everything with them, for example the phone we are using 😂. To develop a custom app for controlling the device you have to learn many things. Also if you want to share a device the opposite person may not have the app. So using google is an easy way for everyone.

[@explorerpragun431]

@@noelk6990very right bro

[@Crkaran-me8rc]

Hi bro good evening can you do me a favour bro I need I have he speak 32 and I need to control some lamps and one fan so with rainmaker app with manually and with ESB 32 can you please send me the program for this one pls bro

[@flbeats3538]

please make with eeprom then it will perfect

[@uddhavmahadik10]

A like this video...i need code this video..

[@swapnilshanaya]

I am getting some error after running the project. Switch2 blinks every after 1 seconds. Can you fix this ?

[@techiesms]

May be there is some problem with your connections. Otherwise the code is tested and we didn't find any such error

[@drelectronics13]

I was too facing the issue and it came out the board is bad it is switching state automaticallly so i brought new board and it solved problem but now device not found error

[@rahulviswanath7916]

can u please share the diagram?

[@seranjeevic]

Thanks for.....making this manual and internet controlled automation ,last time I ask this...@techiesms team reply me it's done Thank a lot And i have a doubt , it can be controlled from pc through local ip address or login access from internet

[@sachinvishwakarma4192]

Hi Dude , Good Work , but Can you please share Gerber & schematics file with us?

[@techiesms]

Sorry As we are selling this complete project, we can’t share

[@scienceprojects9618]

can you give code link . thanks

[@tilotamanavodha372]

Can we add aleart notification to our mobile app using arduino code with esp rainmaker

[@techiesms]

Need to check that not really sure

[@ashoktvm]

Does it work with Home Assistant?

[@techiesms]

working on it

[@utsabkayal743]

Hello I have facing issue of error to upload the code into my esp32

[@techiesms]

what's the error?

[@utsabkayal743]

@@techiesms error is "sketch is too big for DOIT ESP32 DEVKIT V1"

[@techiesms]

Select ESP32 dev module and select partition schemes as RainMaker

[@Premnishad1207]

bro i want to buy wholesale item

[@darshpatel8014]

Sir please make video on requirements to entering into iot feild

[@techiesms]

I made a video talking about skills that Iot companies are looking for, kindly watch that out

[@mudassirmajid99]

Good morning

[@techiesms]

Morning

[@explorerpragun431]

Now If you use SSR instead of Realy That could be awesome

[@techiesms]

Will work on it

[@PintuKumar-sl4hw]

Bro where we can learn the programming of esp and nodemcu boards

[@techiesms]

you can learn online just try out different different example codes that comes with the board and slowly slowly you'll start understanding all the stuffs

[@TradieTrev]

That's a bit silly having to disconnect the internet in order to use the manual switches, why not use the common on the relay as your switch wire and NC contact for the switch and NO for the ESP?

[@surajmehta6568]

Bro, I think you didn't get that you can control your devices through your mobile application as well as with manual switches too whether you are connected to your internet or not manual switch still works.

[@TradieTrev]

@@surajmehta6568 Well not really how he's explained the code. Which I might add isn't on his website.

[@noelk6990]

If you want that way, the system will not know whether the device is on or off.

[@explorerpragun431]

In that way if you turn on the device manually then you cant turn off it by app

[@industron22]

Fan humming karega kaya ismain ...ab tak jitne bhi circuit aye hain dimmer ke sab main ac motor humming sound karti hai...plz explain sir

[@techiesms]

Bilkul bhi nai

[@saikirangaikwad2971]

Code i want

[@swapnilshanaya]

I got your product. But there is a problem with it. You did not give a single hole to screw it to Electrical board. I suggest you to drill 4 hole to corner to the PCB so we can screw it.Thank You

[@techiesms]

Thank you so much for your suggestions We will definitely include this in our next version

[@rupeshbahadur214]

great project i need geber file

[@techiesms]

Sorry we can't provide the Gerber file as we are selling this complete project

[@LedPixelAnimator]

Thank u sir.... Any subscription in rainmaker cloud sir.... Pls tell me... How many devices connected sir.. In free..... This dout sir all ur customer and subcribers.....

[@techiesms]

5 nodes for free in ESP32 & 20 nodes for free in ESP32-C3 and S3 And each nodes can have variable devices based upon the memory occupied by the code

[@aravindhanvivekanandhan5649]

It's already rainmaker project available in KZbin with 8 channel

[@techiesms]

Does it have fan speed control as well?

[@aravindhanvivekanandhan5649]

@@techiesms only thing missing

[@aravindhanvivekanandhan5649]

Well if do complete home automation with different sensor I can buy complete project

[@pansim1971]

Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception was unhandled. (getting this error in your code ) just used ESP32 without connecting any other hardware

[@techiesms]

Mostly the reason may be of library and boards package version If that’s not the case Try changing the ESP32 board and test

[@maheshprajapati7928]

please provide programme link

[@techiesms]

It's in the article whose Link is in description

[@saifalishaikh5647]

While I am upload code it's shows RMaker is not file dictionary

[@techiesms]

Have you installed ESP32 2nd version of boards packages?