Internet Pins Gold Recovery with AP

Ap-Acid Peroxide is stay my favorite method to recover gold from clean items.Cheap and usefull proses,need a bit of time but work like a charm.See you in the next video!

[@mikefuegmann]

I still think a little solar panel to run a small air pump would be ideal, especially for pins. Even if it doesn't run all the time. The time it does run it will speed up the pins dissolving. Either way your doing awesome! Keep it up!

[@frankzahn7773]

Why don't you use the first hcl rather then new hcl?? The old hcl will work better then the new. That will save on hcl.

[@Alex-kp3hr]

I think because of old hcl will be depleated in potency, so fresh strong hcl is needed to continue the process.

[@terrydronet9584]

I find using new HCL when in the middle of running my pins and circuit boards that it works better than using the old as well

[@magthemagnificent8437]

Why not just cut the half off that does not have gold??? And wouldn't the process go faster if you heat the acid to dissolve the pins???

[@999DusanGoldrecovery]

To much pins, to much work mate, to small for my fat fingers ;)

[@Alex-kp3hr]

@@999DusanGoldrecovery and it saves on using valuable electricity when sun power is free.

[@davidleriche2489]

A long process with excellent recovery. Great job. Thank you for sharing.

[@rockman531]

Great results, Dusan! Thank you for showing us a new way to do it. Take Care, Jim

[@colonialcharlie8702]

Solar unit is working great! And if your workshop is a mess. My workshop is.... somewhat like after a hurricane goes thru and your doors were left open. Bahaha Almost warm enough to unload winter storage n start more fun stuff.

[@bobferranti5222]

Dusan, I really like this method, I have a load of pins that I have been saving and this will be a easy way to recover the gold. I'm in no hurry and can leave it sit and dissolve like you did here. Thanks for the great video my friend!

[@ajandizoltan9993]

More much faster with electrolysis!

[@ciffenwealth]

Very nice, i had all lots of messy. too long lost many becuase of chemicals uses. this one saves a lot of money from chemicals.. excellent. one your new subscriber CIFFen, thank you

[@richardoconnor7162]

A Iodine soak would of stripped the gold from this batch of pins in 20 minutes.

[@ajandizoltan9993]

Can you help me : how?

[@jesuscarranza4948]

Hello, I like your videos, I would like to learn how to extract palladium from electronic components, can you tell how it is done?

[@Red9GearHeads]

It’s hard to not love AP. Just toss stuff in and wait. I’ve been kicking around the idea of building a trammel. A super fine plastic mesh tube that spins slowly a couple times a day. It would adjutants the material acting like a washing machine. I think it could speed up doing pins in AP (a lot of what I do). You could probably knock the foils off stuff without digesting the whole pin. Thanks Brother! Great video

[@Alex-kp3hr]

Interesting idea of getting the pins themselves to knock off the loose gold foils. Why not just use one of those plastic paint mixer that have a little fan blade on the end that you can stick into your drill on the slowest speed and agitate for 2-3 minutes daily? No need to fuss with the plastic mesh cause you will filter out the gold anyway.

[@terryfolkerts6379]

Does peroxide work better than copper sulfate?

[@aussiescraphunter7808]

excellent recovery from 240grams of only partly plated pins, that would equate to over 1.5 grams from a kilo of pins, well worth it, top job mate

[@urbanprospector3007]

Could you use an aquarium air bubbler run by a rechargeable battery with a small solar panel to recharge it? Could the cold weather be slowing down the process?

[@ajandizoltan9993]

Elektrolizom je daleko brže i čistije!

[@frantiseklaluch6605]

I did throw away (to electonic recycling) a lot of such half golded stuff, not bothering with like RAM slots on MBs and so on, may be I will kepp it in the future.

[@tinsoffish1810]

Patience..is a virtue

[@arandomgentleman3051]

Love and appreciate people like you!

[@lightning-rods]

I could get distracted and swirl the gold flakes in the black liquid all day. That looked awesome. "Squirrel" ; )

[@johnross8939]

Friend Dusan, does AP not work on magnetic pins? If not, what is the economical way to process then besides using nitric acid?

[@999DusanGoldrecovery]

Reverce electroplating. Ap work if only magnetic pins and not mixed with nonmagnetic.

[@burriedhistory]

Nice amount you got! Congratulations.

[@Edward-ju1vj]

If there's small plastic bits will it just dissolved or do I have to get all the plastic out?

[@SilverScorpion]

Great video buddy

[@josephcormier5974]

Very nice all together those things give you good gold just so much work five stars my friend thank you for sharing

[@mobseen69]

Is that a freznel lens doe solar heating?

[@Edward-ju1vj]

I have pins that are solid gold straight through are they gonna be brass? Or did boards ever have solid gold pins?

[@urbanprospector3007]

Most likely simple gold plating. I have never heard of solid gold pins. That would be crazy

[@rafajian62]

thank you i realy like yout videos, these has been the most informative videos im a beginner and i was looking for methods without Nitric acid because is expensive and im just starting, you are the best i will follow your videos from now on, you are really helpfull and show full proces, again thak you for showing your knowledge and expertise

[@mr.g-sez]

is it possible to drop gold out of the ap? man i think i used too much h2o2(3%) so my gold is dissolving in the ap? how can i rocover it without using solid copper

[@mhoga7899]

Hi Dusan I am using 16% HCL and 30% HP, Should I change the ratio ?

[@bazonis1gp]

👍👍👍

[@Alex-kp3hr]

Can this process be used on a jar with only suspected silver pins?

[@shaneyork300]

Another half gram of gold for Dusan!

[@Alex-kp3hr]

I like this technique because it only uses cheap HCl. Can this process be used on silver pins also?

[@toomuchdebt5669]

No. Use sulphuric acid with a little nitric acid.

[@ogisimic1815]

Poblize mi objasni de te netko moze pronaci ako si zainteresovan za rad

[@ajandizoltan9993]

I ja imam dosta separiranog materijala, i pisao sam mu, ali nikad mi nije odgovorio, na žalost!

[@ogisimic1815]

Potrazicemo ga preko udbe

[@999DusanGoldrecovery]

Nećete me naći ni preko udbe hahah Šalim se naravno. Ne radim sa strankama zbog loših i neprijatnih iskustava iz prošlosti, tako da zao mi je ali radim iskljucivo svoj materijal i iz hobija!

[@ogisimic1815]

Mislio sam da porazgovaram stobom jer ja engleski i ne zelim.razumjeti

[@ogisimic1815]

Ja i savjete placam

[@RussClarkRocks]

That seems like a shit ton of hassle for $30-40 in gold.

[@AllCategoryChannel]

Calculating how much the chemical materials cost you’re not even breaking even. Excluding the cost of time, finding, separating and accumulating that amount.

[@Alex-kp3hr]

@@AllCategoryChannel Hey, don't forget that for the most part we are not professionals doing this to make a living and pay the monthly mortgage. We mostly are backyard scrappers doing this as a hobby and sometimes hoarding the metals for the future when metal prices skyrocket due to our incompetent leaders and the devaluation of our fiat currency.

[@seanweiss6729]

How did you ever get so many pins? I've been cutting and saving forever and barely have 2 shot glasses full. I tried getting any electronics I can find to pick up and get pins fingers I see chips etc from but I have nowhere near the amount of pins you do that's crazy

[@seanweiss6729]

Also from what I've read ap does dissolve a bit of the gold too. I'm sure I'll never get enough to worry about the little that dissolves, but do you have a way of getting that out of the ap?

[@seanweiss6729]

Also from what I've read ap does dissolve a bit of the gold too. I'm sure I'll never get enough to worry about the little that dissolves, but do you have a way of getting that out of the ap? Sorry I'm still new to this and wanna be armed with all the info I can get before starting the process

[@seanweiss6729]

Also from what I've read ap does dissolve a bit of the gold too. I'm sure I'll never get enough to worry about the little that dissolves, but do you have a way of getting that out of the ap? Sorry I'm still new to this and wanna be armed with all the info I can get before starting the process

[@seanweiss6729]

Also from what I've read ap does dissolve a bit of the gold too. I'm sure I'll never get enough to worry about the little that dissolves, but do you have a way of getting that out of the ap? Sorry I'm still new to this and wanna be armed with all the info I can get before starting the process

[@seanweiss6729]

Also from what I've read ap does dissolve a bit of the gold too. I'm sure I'll never get enough to worry about the little that dissolves, but do you have a way of getting that out of the ap? Sorry I'm still new to this and wanna be armed with all the info I can get before starting the process

[@seemev2.0phuckbootube78]

Thanks!