InterVLAN Routing using Layer3Switch SVI Part II in Pashto

InterVLAN routing allows communication between devices in different VLANs. A Layer 3 switch, with its routing capabilities, is an efficient solution for this purpose, eliminating the need for a separate router in many cases. This guide explains how to set up InterVLAN routing using Switch Virtual Interfaces (SVIs) on a Layer 3 switch.
Key Concepts
VLANs (Virtual Local Area Networks):
VLANs segment a network into smaller, isolated broadcast domains.
Devices within the same VLAN can communicate directly, but communication across VLANs requires routing.
SVI (Switch Virtual Interface):
An SVI is a virtual interface that allows a Layer 3 switch to route traffic between VLANs.
Each VLAN requires a unique SVI with an IP address configured for routing.
Layer 3 Switch:
A Layer 3 switch combines the switching capabilities of a Layer 2 switch with basic routing functions.
In this video, you'll learn how to do inter-VLAN routing on a Layer 3 Cisco Catalyst switch using
Other Related Videos:
How to Create LANs
• How to Create LAN in p...
Remote Administrations SSH and Telnet
• Remote Administration ...
VLANs
• Virtual LAN (VLAN) | V...
InterVLAN Routing using Router on Sticky
• InterVLAN Routing usin...
InterVLAN Routing using Layer 3 Switch (SVI)
• InterVLAN Routing usin...
How to Configure DHCP
• How to Configure DHCP ...
DHCP for VLANs
• DHCP for VLAN and Inte...
How to Create VLANs
• Virtual LAN (VLAN) | V...