Intro & How to Install | Boomba Shifter Base Bushings for '14+ Ford Fiesta ST

[@mattmiller4710]

With small hands and/or patience these can go on with out taking out the whole center console; just the sides, lower trim panel and shift boot. I undid the cables too, but even those may have been unnecessary. After getting all that off remove the 2 t30 screws, pluck out the metal sleeves and rubber bushings then slide the lower bushing halves under the assembly, drop on the tops(halves with logo right?) and reassemble. Made a much bigger difference than I expected in shift quality, maybe something wasn't adjusted from factory correctly, but 4th to 5th is a lot more natural feeling

[@BoombaRacing]

Thanks for the review! I'm sure others will appreciate your install tips!

[@slappy76]

I was gonna say that's a pretty involved disassembly for just shifter bushings. Good to know it made difference though.

[@josephduncan7611]

I recently did this install and did not have to remove the center console. The entire shifter assembly can still be removed this way, which I found was the easiest way to get the old bushings out, and the new ones can be inserted from the sides fairly easily. Hope this helps someone out!

[@MatthewTitterington-bq7eh]

Will this work on a 2013 fiesta se?

[@BoombaRacing]

Hello! Yes they will!

[@jackburns2504]

would these bushings fit a 1.6 tdci fiesta aswell ?

[@BoombaRacing]

We can't for sure as we havent been able to try it for ourselves.

[@davidedonelli2196]

Sorry, i bought the Fiesta ST in Italy, is this fit in? i read that fit only in US Fiesta ST...is there difference?

[@BoombaRacing]

Yes these bushings will fit in a Euro Fiesta ST!