Creating a curved butterfly roof with a standing seam finish... this helped me soooooo much! Thank you!
@kathywagner255111 жыл бұрын
Thanks so much Travis. Very nice you explained this. I need to know about this since we are designing a skyscraper. And I love organic shapes. I love how fairly easy you made it to be. Great job !
@ravielink11 жыл бұрын
I was using the structure template for my work. I followed all the steps like you said but it only showed the curtain wall. Apparently the glass was still missing within the wall . But when i tried these steps in construction and architectural template it worked like a charm. I still dont know what I did wrong while using structural template but I'm glad that I can do this in other templates. Thanks a lot for the help.
@1992aleesha10 жыл бұрын
You have saved my life! I am amazed at how simple that was! I will definitely be using this for every project!
@vicarioustube5 жыл бұрын
Thank you VERY MUCH you make this so much less stressful than it seems to be. I subscribed, 50+ here, we need to upkeep I am at school for 3D knowledge improvement!
@GlowGamingZone6 жыл бұрын
Thank you so much! Revit is more flexible than I could imagine! Thank youuu♡☆♡☆♡☆♡♡☆
@chrisjparker1111 жыл бұрын
Good stuff mate! ...I'm not British but w/e. Any and all Revit videos are wanted so keep it up.
@fasilrm74966 жыл бұрын
Thanks, your classes are really awsome
@engenheirogelson4 жыл бұрын
parabéns pelo video com boas explicações
@salman050359 жыл бұрын
this is very important tutorial for curtain walls I'm thankful to you.....:)
@raekell Жыл бұрын
I finally understand what massing is for hahaha. Question: for the curtain wall, I have a curved facade, but the roof is also curved. Can I adjust the top profile to not be flat to one level/plane? Excellent video btw! Thank you!
@paraguayaX30310 жыл бұрын
This is so straight forward and informative! thank you!
@Meerios39 жыл бұрын
Please help, i have 2015 revit, I have created a curtain wall system by using the mass tool and its curved. Why wont it let me attach it to the roof which is slanted?
@jyuu10 жыл бұрын
Hi, very useful video! Just wanted to know whether it's possible to create a curved wall (like how you have done it in this video) but with varied heights? I've been desperately looking for a tutorial! Thanks.
@Idesignsolrobots11 жыл бұрын
Yes, to get a more accurate illustration of curtain walls in a curvaceous form, you would need to use the adaptive components. There are predefined curtain wall grids for curved walls, otherwise you would need to create your own curtain wall panel family.
@naushinsome10 жыл бұрын
Hi, how do you make a simple curved wall that is curved only vertically? Say if you had a rectangluar prism, and needed to curve only one wall vertically to the roof? When I try your method, the wall just becomes straight on an angle, when I need it to be curved.
@Damola.Travels9 жыл бұрын
Thanks for the Video, you just made my life easier.
@abdallabashir71112 жыл бұрын
Thank you this was helpful
@RosPlays6 жыл бұрын
for the curtain system, is it possible to make each panel hexagons instead of squares?
@nadamianoa62356 жыл бұрын
hi travis, i have watched your video and i find it very useful, but when i followed your video i made the curtain wall system and it will only display mullions without glaze, i tried to edit it in the curtain wall system family and change the curtain panel from none to system panel glazed in the edit family window and it still woudn't make any glaze
@sohaibaljarih5 жыл бұрын
Thank you very much, the information you are giving are very helpful :)
@elliottlet1d66710 жыл бұрын
Cant seem to find 'solid form' i have the revit 2014 version. Any ideas? thanks
@junsantiago22611 жыл бұрын
The connection between mullion and transom in that curve curtainwall is not good, do you have any advise on how to make a good and clean connection between mullion and transom in that curve curtainwall?
@Idesignsolrobots11 жыл бұрын
Hi Ravi, what has happened is that your View Settings for that view are set to 'Show Mass by View Settings'. Try accessing the Massing and Site Tab, and in the Conceptual Mass panel, use the drop down menu to select 'Show Mass Form and Floors' It has an icon with a lightbulb on it. If this still doesn't work, you may have Mass unchecked in model categories in your Visibility/Graphics settings in your view properties.
@SameerAhmad-wm2ei6 жыл бұрын
please could you tell me how i can array concrete columns in ellipse , but all columns should be faced towards ellipse center
@nikoleistung10 жыл бұрын
Thanks a lot! I have a question - Is there any way to make an opening in a curved wall, which is not an arc, but the way you create it?
@Idesignsolrobots10 жыл бұрын
There are a couple ways of creating openings in curved walls. One way is to create a void in your mass, and then when you apply the wall type to the face of the mass, it should leave the opening. The other is to use the Shaft or Opening tools. In this respect, you can create a square opening in curved wall. Unfortunately, one can't use the Edit Profile option, as the curved wall does not have a plane for you to modify the profile sketch. You can also get some interesting features by using a roof or floor on slopes, and using the Attach Top/Base option and then removing the floor or roof after.
@danielwallerjr68575 жыл бұрын
How soon can you make a tutorial video for beginners for making a Slanted Curtain Wall Without Mass using an octagon?
@techniformmetalcurvinginc57318 жыл бұрын
Now if curving the curtain wall were just that easy!!!!
@ravielink11 жыл бұрын
Every time I try to create system like you did in 6:20, I get the message "None of the created elements are visible in 3D View: {3D} View. You may want to check the active view, its Parameters, and Visibility settings." I tried to play around little but but still its not working. Can you tell me how to solve this? Please
@edhsieh237910 жыл бұрын
Do you know how if I want to put a door on your glass wall ? Thank you so much !!
@yptocins7304 Жыл бұрын
THANK YOU SO MUCH GODBLESS!!!!
@kennedychako85577 жыл бұрын
Thank you. Very informative indeed.
@24zick6 жыл бұрын
Thanks. How can I add a door to such curtain wall?
@rawkrXbabee2 жыл бұрын
thank you!! saved my project lol
@negin-pnh10 жыл бұрын
Thank you very much.Great Tutorial :)
@ced777sleep2die8 жыл бұрын
If I don't want to have a curved wall but a wall that is made of several planes (which are basically triangular surfaces not curves), as if you are slicing a solid form in Autocad with the slice tool, please help
@bradmoule4 жыл бұрын
Im having this exact problem today, did you ever find a solution?!
@kowshikprasad55563 жыл бұрын
Thank you so much brother
@Earth09810 жыл бұрын
This is very helpful. Thanks!
@raekell Жыл бұрын
"Might get some leaks in this wall" hahahaha I lost it...
@jimmynathan47567 жыл бұрын
why can't i combine the normal wall with this curved wall?
@zoem36208 жыл бұрын
thanks. It was a great explanation.
@mehganfrancis10828 жыл бұрын
you are a life saver!!! Thanks!
@diegofernb8 жыл бұрын
how do i make the glass panels curved?
@ingridmusic29027 жыл бұрын
Great explanation !!! Thank you :D
@Doudaska7 жыл бұрын
Great video, thank you
@rajaneesh9999 жыл бұрын
Thanks this is very helpful.
@celinebayangel6 жыл бұрын
- I made 2 curves: Invalid shape found in original. Parts could not be created
@Meerios39 жыл бұрын
It wont change when i change the spacing what do i do?
@pault2077 жыл бұрын
loved it thanks so much.
@muminhn10025 жыл бұрын
Thanks, it was informative.
@lifeofiansa10 жыл бұрын
Thank you so much, it was really helpful :-)
@natascha_kn9 жыл бұрын
You helped me a lot, thanks =)
@kevykev9136 жыл бұрын
great instruction!
@caligo64111 жыл бұрын
Is there a way to rotate the grid layout? When I click the Configure Grid Layout icon there's no option for changing the angle, and no option in the properties menu, just justification and offset.
@Idesignsolrobots10 жыл бұрын
If I'm not mistaken, you will change it in the U and V directions in the properties panel. You can change the angles from 0 to 90 degrees for angled mullions.
@DarrinShafer10 жыл бұрын
So I can make the mass for a curtain wall but when I get to creating a curtain wall, I don't get the create curtain wall option, mine still says create form (can't choose) and a blank subcategory spot. Can anyone help me?
@DarrinShafer10 жыл бұрын
Still no luck. Sorry.
@paraguayaX30310 жыл бұрын
Wait...I just noticed this happens to me too :(
@raulnieves704310 жыл бұрын
Bit of a long time, but in case you are still wondering. Did you create a solid wall when you were massing? And did you create multiple levels in your Curtain wall design?
@shortlineslalom6 жыл бұрын
thanks very much
@RichardBeatson10 жыл бұрын
Thanks for sharing
@Aisha90AlAni11 жыл бұрын
thank you ! that was so useful ..
@hershmyster9 жыл бұрын
Very helpful!
@maythazin26827 жыл бұрын
thank you so much sir...
@Insbk5689 жыл бұрын
thaaank you
@elieabedi9426 жыл бұрын
beingpamm hello
@kalukp8 жыл бұрын
thanks a lot.
@rajakalithasan2348 жыл бұрын
thanks .....its very helpful.....;}
@amineblidry59784 жыл бұрын
Genius
@simbawoof8 жыл бұрын
thank you :)
@rakeshb75857 жыл бұрын
Super video
@cadeosysengineeringservice84696 жыл бұрын
Very useful WoW
@nadezhdabobyleva89149 жыл бұрын
I have the same question as Meer
@emorphan10 жыл бұрын
thumbs up!!! thanks
@chriscruz53598 жыл бұрын
those 9 dislikes were all jamaicans who thought it said "dis i like"
@JinzExpatLife6 жыл бұрын
RACIST
@felipemvera5 жыл бұрын
When you did the wall by face at 9:10 my revit wouldn't let me do that. hmm
@photogramistic7 жыл бұрын
In terms of Design its ok..in terms of Architecture this is useless and wrong. The glass pannels must to have a normal insert instead of rare individual angles.