IP Camera lag, disconnect, network abnormal, glitch, connection problem H.264 and H.265

If you are having issues with intermittent disconnect or any lag on your NVR you can try to adjust the resolution, I would recommend 1080 being the lowest. Frame rate is also another option and also you can play with the rest in the Video settings. I listed what I suggest to do first below.
What to try: (You can do them all to really drop the bandwidth consumption, but again try it one at at time first to preserve quality as much as you can)
1. If it is available H.265 (H.265 has a better compression than H.264 so this will make the stream less heavy and can help)
2. Adjust Bit Rate (1500 is a happy medium as far as still getting high resolution but then lighter bandwidth consumption)
3. Change Frame rate
4. Adjust resolution
If you need further assistance we do a 1 on 1 direct support. Fees may vary depending on severity of assistance. FREE if simple and quick. Email us at [e-mail] for FREE issue evaluation.
For 1 on 1 Assistance please visit www.securitycameratechsupport.com

[@MrChadwicj]

Thank you for this video. My H.264 network video recorder was intermittently on for approx 3.30 minutes and off for 33 seconds repeatedly. I checked out loose connections, changed cables, etc. I eventually disconnected the internet cable from the H.264 video recorder. This intermittency immediately stopped. I recently had fibre fitted changed from ADSL internet connection. Is this the problem and do I need to reconfigure the video/internet set up?

[@gianlucaankedarts.2779]

Hi, I have a problem with my URMET 1093 / 008h dvr. When I was upgrading the firmware manually with the usb stick and the power went out. now every fly i turn on the dvr it stays on the logo screen without loading anything. any solution? Thanks in advance!

[@Curs_Frizerie_1_la_1_Bucuresti]

When PNI DVR can not connect with home because a Control button disapear and can not connect with the same ip, how you connect the spot where it is the camera with back home to see and to record ?

[@lourdaldizfontillo8905]

Boss thank you for your info pls do another video for hikvision freezing problem

[@rhianswithenbank6458]

Hi, Thanks so much for your really helpful videos. I wonder if you can help me? We have a Technomate 704 NVR (with no HDD) and a Technomate single TM 505 camera and use the Antiference Clearflow Beam 2 access point and receiver for transmission using PoE switches. After doing a factory reset, we are trying to set up the system in the house before moving it to its new location and are unable to view anything on the camera. We just get the message 'No link'. When I logon to the guarding vision webpage and add the NVR device, it's status is 'online'. When I enter the NVR IP address in the web browser (which intermittently works, it doesn't always o to the log in page) and log in, we keep on getting the message to download the plug in (web components), which I have done, but the message does not disappear so not sure if this is the problem? I downloaded SADP last night and the NVR is showing as active. We have tried to follow your videos but still have not managed to see anything. Can you help? The system is set up as follows 1. There is a PoE switch from the mains plug with the access point (WAN port) plugged into the PoE port of the PoE switch and the LAN port of the PoE switch is free. The access point has a cable going from its LAN port to ethernet port 2 of the NVR. 2. There is another PoE switch from another mains plug with the receiver (WAN port) plugged into the PoE port of the PoE switch and the LAn port of the PoE switch on the receiver has a cable connected to a port on the camera. 3. The NVR LAN port has a cable going to port 2 on the BT hub 6 router, a USB mouse connected and a VGI cable to a Hitachi 22HB11J06U colour monitor(resolution 1920 x 1080). It doesn't work with HDMI cable either and we previously used a black and white Panasonic TX L19X10BW LCD television (1080 resolution), but thought that might be the problem so switched to the Hitachi and it still doesn't work. Any help to get the live viewing to show would be gratefully received as it is used in a calving shed and my dad has fractured his back and could really do with it working at the moment. I believe the NVR firmware is v3.4.93 Build 170831 and the camera v 5.5.0 Build 170927 and it will not let me upgrade these. Thanks in advance Rhian

[@idaniaesparza3881]

I have Bagatta IP cameras. Sometimes they time out. Why? I have them hooked up to wifi that comes with apartment development where I live. Can anything interfere with these cameras such as a device or remote, say if someone is attempting to not be seen on cameras? They are encrypted

[@securityguru407]

Timeout can mean many things. Since its on wifi, especially in a big apartment building connection can be depleted, which causes the timeout, because the connection is not stable or slow. You can ask you manager to drop the bitrate. This will allow the throughput to come through better. Good luck! =)

[@00ii0i9]

hi i got issue with my network i can't even play video game while these ip camera are connected my ping spikes like cazy after i installed this why is that?

[@itchyJaw]

stop live streaming your camera online

[@00ii0i9]

@@itchyJaw yeah Are there any other options I can upload every hour instead of live streaming?

[@ryanhosiassohn7176]

I cant even get the live view working keeps complaining it needs the plugin

[@securityguru407]

You are probably using chrome or other browser other than Internet Explorer. If you are using IE simply add it to trusted site in your internet option security section then download and install the plugin that will pop up. Once you have that then the image will come up.

[@123Nezzito]

Hello, first I apologize that I am using a translator. I have a DS-7604NI-E1 DVR and 3 IP cameras installed, before they were working well, 2 days ago there was a power outage in my house and apparently something happened but the DVR was factory reset and when installing the cameras I They appear as "offiline (network abnormal)" and I cannot install the cameras, what can I do? the cameras appear with this ip: 192.168.254.2 / 3/4

[@securityguru407]

No worries. 1. make sure the light on the back is blinking to make sure that the PoE or the camera did not go out or have a short after a power outage. 2. Are the cameras Hikvision cameras or are they 3rd part? 3. If you would like send me an email at [e-mail] give me your camera model number and all that maybe i can help you remotely to make them work. =)

[@123Nezzito]

@@securityguru407 Thank you very much, the cameras are Hikvision but I already solved it, I had to reset the cameras manually with the button of each one and with that it was solved

[@sonney8899]

I have a question man i have a greni 1080p smart home camera it wss working fine but now the video in the playback function lags, skips, and is choppy like every mid second there is like this type of delay or pause and i can not for the life of me figure out how to fix it i watch it through the app on my phone if anyone has a similar problem and knows how to fix it i would greatly appreciate it thanks

[@securityguru407]

what is the brand and model of the camera?

[@sonney8899]

@@securityguru407 I think its a Geeni smart home camera 1080p