iPad 7 won't turn on or charge - Faulty Charging Flex Soldering

[@kalentonggaming7093]

Same feelings here. Everytime i watch a video. I always tell myself. I wanted to be like him. So i practice a lot. A very great inspiration.

[@erichopper2685]

A customer came into my repair shop for a ipad 7 charging port issue. I watched your video and followed your instruction which i successfully completed the repair with no issues. Thanks from Er Gadgets Repair!

[@kevinjose6634]

Respected sir..i already joined an institute of studying mobile chip level and tab service after watching ur video. ..i am in kerala ,india ...it is the institute which was first started in india...6months course...21 years institute...❤️❤️love u .and ur work..great person,great job..god ble ss❤️❤️❤️❤️❤️

[@jamshedazam5172]

i dont know why, after watching your videos i just bought repairing tools i even don't know how to use them but now i am going learn from you and from institute as well in Sha Allah, and thank for giving me new aim .love you from from pakistan

[@pandrosik]

I know this is an older video however I used this as inspiration to carry out this repair on my son's iPad. Not as good as the "factory" but I was successful. Thanks for taking the time to record, edit and post these videos. It helps motivates us amateurs.

[@WhiteG60]

I'm about to do the same on one of my daughters' iPads. I've done plenty of soldering, but nothing like this yet. Kind of nervous to try it, but seeing other's being successful is giving me some confidence. Thanks for the inspiration!

[@mohsentabouna6401]

Same feeling here for 2 years now! your old videos are still as amazing ❤️ I just wish you could make a live workflow video where you just record for an hour or two and you just work on devices I also miss the shop tour witch shows what's in queue

[@radius.indrawan]

awesome job! i don't know why but i always got a satisfaction everytime i watch you desolder & solder back those flex cables.. 😅😅😅

[@lexander9686]

7:30 it's that clean shine bro

[@radius.indrawan]

@@lexander9686 yes, that, and the way he done it, oh it's just so satisfying.. 😄

[@bisengimanajeanfidele84]

Love from Rwanda-Kigali much respect sir

[@tkorkunckaya]

Just relax, everything's gonna be alright... Reminded me the song. The happiness and proudness at the end when it passes...

[@kevvyg04]

didnt know about the small window alignment until I saw this vid ! havent attempted repair just yet - want to be prepared correctly. many thanks from England !

[@kintag4459]

All thanks, appreciation, respect and friendliness to you, Engineering

[@digihorse6730]

Diagnose, Fix, Smile. That's how you do it.😊

[@lexy3754]

I have been watching your videos for about a week now and I have begun to study everything on electronics. Omg theres soo much to learn! But I honestly want to be just as good as you

[@TheCod3r]

Another great repair, always take pride in your work

[@MAHMUDASERIA]

Hello my dear friend .. I watched your videos on how to replace a charging socket for iPad 8 and I did just like you .. To my delight I succeeded from the first time .. Thank you very much :)

[@dinukahashan6778]

Legend of repairing 😍 love from srilanka

[@nigelholland24]

Just found your site and watch many videos. Great videos thanks. I have a laptop that wasn't charging. So I took it apart. And reflowed the power adapter. And it now works. Thanks for the inspiration.

[@kyebosch6896]

Beautiful soldering! Great narration of the process! Thank you, thank you.

[@dadwillfixit1907]

Great job love the little smile when the job goes right

[@P.M.88]

i repair for a living to, find i can normally remove the board and dock and ultrasonic the charge dock only, its normally a dirty connector internally. have had to do this a few times. love the vids as always

[@Synaux]

This is freakishly good content! Many basic questions, but I will keep watching. With content like this, I am sure to eventually find the answers and only have to ask questions that you wont shake your head at.

[@abbasmohammadbeygi2055]

Hello, your work is excellent and of high quality, and I always follow you from Iran

[@macrepairphoenix]

You make it look so easy. Its like watching DaVinci or Michelangelo at work!

[@RR-fv2uu]

Greetings from Australia. Love the videos. how do u fix a lifting ipad screen and what adhesives do you use to reassemble items

[@sharfazhameed6382]

There is always a new valid information in your videos n it’s very helpful. Thx a lot mate n keep up the good work.

[@divingfalconfpv4602]

Doing my first iPad air 2 repair. Charger port and battery 🔋 Seen you take the solder off with wick but didn't see you or fresh solder down on pads before putting cable on top?

[@danielsaturnino5715]

Just incase you dont know, a 5Y3 is a rectifier tube for vintage equipement :)

[@FIXDIY]

Flexo welding is very interesting, especially connectors 😋😌

[@marcianzero_yt]

Thanks again for putting out all those videos with useful information and also encouraging all beginners. Hope the YT channel pushes your business as much as you expect. Be proud of your progress in improving the content vs your start. It shows just what you say in the video. Practice is the mother of all skills and dedication brings evolution...

[@evoracing5563]

Great job as always. I see you prefer the clear flux compared to the AMTECH you reviewed a while ago. I found the milky colour takes a while to get use to as you need to heat it up first so you can see where you want to rework.

[@pejy6048]

What temperature and air speed do you use for this repair?

[@TheFacttasticFour]

In an previous video you were repairing a display connector and saw touch was not working and you Changed a SMD or parts lf the Motherboard. I just want to know how did you measure the ohm they take so that I can also find out too the same which smd is working. And if you can find the case" Samsung Grand 2 g7012 touch not working it will much help for me.

[@macdawaj5604]

sir what device you put on charging flex to know is good the u2 ic tnx new subscriber i appreciate your work is clean and good explanation

[@douglashughes714]

How much does this cost and how long would it take? I will be shipping if it’s possible. I use to be able solder and braze but I got brain damage while on duty as a police officer and now I have trouble being steady.. thank you for your time,

[@Mavstang73]

5Y3 is a tube rectifier for converting AC to DC

[@jimjackson4256]

Hi what wattage is your soldering iron? Thank you.Also why does adding low melt solder cause the pre-existing solder to melt at a lower temperature?Thank you

[@rheography]

what are you using for cleaning the flux ? alcohol? or pcb cleaner?

[@elektron2kim666]

Was fooling around with a Casio PNM-500 motherboard recently. Splattered solder on the display pads and had to get it off again with old tech around in my home. I need the module for testing something with a tiny LED in the near future and it worried me when a pad lifted. The module worked anyhow and I wonder what glue I can use for a little connection pad?

[@dseekertv7191]

Im watching from phillipines.

[@audun7255]

does the tristar tester test every dataline on charging port like audio etc?

[@jamescoffell6302]

I was going to try this repair, but after I see what kind of skill it takes, don’t think so. I weld for a living, this is whole different animal.

[@bryanswaggbeast8194]

Its fascinating to see how you get the solder to separate not sure why I can’t do that. Might be because I use a cheap soldering iron but any tips would be appreciated.

[@Sasser2015]

I'm no expert, but I believe the flux is the primary culprit in causing that effect...... I think it's virtually impossible without.

[@gregd.7654]

Hi all, is low melt solder just lead base solder?

[@stefanlechner]

Nice job alex. Very nice and perfect. As always perfect job. Greets from austria

[@brianredmond4919]

How did the factory do it without solder ?.

[@nchagas]

Friend bother to talk about your camera model and how lenses you use? The quality is very good, I work in Brazil with repairs and I'm not sure which model to buy to have an accepted quality. Thanks.

[@NorthridgeFix]

northridgefix.com/product/microscope-camera-bundle-1080-60fps-180x-lens-ring-adapter-2-barlow-lenses-0-5x-0-75x/

[@Jonathan-ke9no]

Hello do u have the Ipad Air 2019 A2152 Motherboard view ? for No LCD/backlight repair i"m in trouble THANKS A LOT

[@AA-nz8vz]

What if one of them damage when you remove it. Can it still charging?

[@oeztrkahmet]

Greetings from Austria🇦🇹👍🏼

[@GR3G1987]

What if some pads are gone? Thank you.

[@birenlingthep3194]

I really loved to watch your videos. Please could explain me what kind of tester that you testing on this video (more specification)

[@NorthridgeFix]

northridgefix.com/product/usb-volt-amp-meter-supports-usb-c-and-and-all-other-usb-connectors/

[@chrissanders2562]

You are amazing at what you do i hope to be like you at something one day. Do you ever work on old vintage electronics?

[@niteshkumarmaurya6601]

Always Good job sir

[@biratojha4614]

Inspiration for me.. Thank you..for your effort..❤️❤️

[@ratsada5812]

Nice work sir.. someday i can be like you... i like how you work every time i saw your work it always inspire me to work harder

[@tfranco3081]

Did you ever list the microscopes on your store ? I keep looking but havent seen any.

[@RokasSondaras]

I'm creating videos about microsoldering too, but in my native language. I wonder if you could find few minutes to talk with me via internet and respond to few of my questions. This interfiew would really benefit my viewers as microsoldering in my country is so uknown... Our population in just 2.5M

[@VirtualNick]

What brand or model of voltmeter do u use for your work ?

[@autor50]

Buenas Tardes. No entiendo ingles, pero igual me ayuda tu video, viendo como reparas y solucionas. Saludos desde Perú.

[@fredericomacias5547]

As always, nicely done. Keep it up, good man!

[@paultungu7260]

Hello there. What erectronic microscope you have? Guess I can get one.

[@githambotechnologieskenya]

I would like those soldering tips, can you ship to Kenya?

[@asifkhan-zz1ud]

Sir, how nicely you done it. Mashallah

[@wiener35]

I love watching every video. Awsome

[@TheBinarydeity]

I love your videos.

[@rudyespada9324]

Nice video.....I would like to see a surface pro 4 video in future. 👍🏼

[@MuhammadUsman-yg7pw]

Sir where are you from?

[@sj55]

We are back in lockdown here in UK so need more to watch

[@sj55]

@Data Land until December 2nd

[@sj55]

Flawless has usual great job 🇬🇧

[@abdorb6152]

of course i enjoy watchin .... thank you a lot

[@donnierobertson3088]

Great job and video like always

[@hiramrd21]

you comment reminds me my first attemp to relplace an hdmi port on an xbox one took me like 6 hour to get rid of the bridges between pins haha... !!

[@asifkhan-zz1ud]

Sir please make some videos about desktop mother board repair

[@houssemjj455]

Amazing job brother 🇩🇿🇩🇿🇩🇿🇩🇿

[@Try4Hard]

Are we talking about "low melt solder" when the melting point is around "200 - 250 °C" (444 °F)?

[@hiramrd21]

you read my mind.. i want to be like you !!

[@ahmedsiddiqui6056]

Excellent Job. Wow . Is there anything perfect than this. Nope. MashaAllah👍👈

[@francces803]

Greetings sir, would you mind doing a video on a "new 3ds xl" by nintendo. There is a small flex cable, some how i managed to break the clamp when i was prying it. Its a very small clamp almost microscopic. I love your videos by the way, i wish if you do more videos about handheld consoles like psp, ds , gameboy..etc

[@dseekertv7191]

Pls do a repair of desktop motherboard..

[@daviddenson3324]

I don't understand why so much heat is needed for low melt solder? You said you used 370 C from the hot air gun. That's almost 700F. You would think 350 to 400F would be hot enough. Can someone please explain.

[@GO-lo4tv]

Thermal mass, some of that heat is going to get soaked up by the board itself, so would take a lot longer trying to use 350 - 400f to reach the melting temp of low melt.

[@daviddenson3324]

@@GO-lo4tv thank you

[@S_RaccoonPotatoWizard]

Such great videos bro. Thank you so much!!

[@diptajitdutta9369]

What thermal camera you use?

[@bilalamin7580]

Flir E60

[@hamzaproduction2152]

Can you fix Samsung s6 edge it's has ram issue and won't turn on back

[@dseekertv7191]

Job well done

[@mustafamajeed1444]

U do amazing job sir

[@anibasballesta1977]

Espectacular

[@sohans7232]

Can I get an heart from NorthridgeFix 🤗🤗

[@NorthridgeFix]

Just for you

[@varshilsinhthakor310]

Love from india ❤️

[@melihcantoker2032]

very very nice

[@wayneslink]

Perfect

[@farzana1236]

Nice

[@sayadali5191]

Have you ever repaired a flex cable???

[@sayadali5191]

@J Fz oooooo

[@SantiluX]

👌 magnifico!

[@GetGood5]

nice

[@Jason-zh7wo]

Great 👍

[@TaKkGaminG]

Poli sanam😍😍

[@ayushsharma7474]

Sometimes Tristar tester did not gives correct information

[@الحكمة-ظ8ن]

maşaallah nice video

[@MN-tf5mb]

I have the same issue 😂on my kids iPad 7 can't get a charging ic to fix the iPad 😑 I think a dodge fan attachment caused it😮

[@erwinmorales1327]

If only i have same tools ...