IPG 500watt Fiber Laser Cutting machine for 8mm carbon steel for ACCURL

[@JohnWilkinsonTesla]

Eleven people would expecting robots with lasers. Little do they know that's exactly what they got.

[@n1xcamic]

Could you tell me what settings were used for this video? Gas type and power? Piercing height and time?

[@jubeikibagami7130]

What parameters does the court use for drilling? and the perforation is 1mm thick?

[@sandrazhao8803]

what kind of material that you want to drill?

[@jubeikibagami7130]

@@sandrazhao8803 I wanted to know what are the values for drilling and cutting on carbon steel, of 8mm caliber, I have a machine of 750 w but it does not do the drilling as it is seen in its video ... for that reason I wanted to know values of perforation, the cut in my machine is great but not the drilling ... thank you very much for your answer!

[@jagdishprajapat8027]

Sir me laser machine chalta hu muje job chaaye kiya aap muje ripalai kar sakte Ho kiya aapki brans me koy khali jagah hai to me Karna chhata hu plazz ripali sir

[@jorshque2740]

Can you share the program for cutting 8mm carbon steel..please

[@ACCURL]

My email [e-mail]

[@niam102008]

is it 500 or 5000 watt ??

[@ACCURL]

It’s 500w

[@ABRehman-fw1ou]

I would like to purchase the machine. Any contact for further information about prices and machine specification.

[@amberzhang9068]

I will give you our product details and quotation, please add my WhatsApp[phone]

[@sandrazhao8803]

what kind of material that u need to cut?

[@tushargajbhiye6487]

What is price of this machine?

[@grzegorzwestphal2788]

What are the cutting parameters? Gas? O2? speed? nozzle? focus?

[@TheDetroitSlayer]

No affiliation with the channel. But judging from the cuts, he is using shop air with a 2mm diameter nozzle running roughly 2000-4000mm/m and his focus is going to be about 3mm into the material. Running shop air into 8mm, i would say he is pushing maybe 8bar in gas pressure. Cant really crank it, keep in mind it is only 500w, but atleast its a YAG.

[@Skylos100500]

TheDetroitSlayer nah, even 1000mm is a lot for 500w

[@TheDetroitSlayer]

Its a fiber laser, not a C02.

[@TheDetroitSlayer]

Just speaking from experience with the specific beam generator theyre using. 500w of a 1070nm beam is powerful enough to cut at a decent speed greater than 1m/min on 8mm thick steel with either a 125 or 155 head.

[@Skylos100500]

Yeah, i guess its possible with a very good settings. I've ran 500w fiber laser before, for me the average was about 700-900mm with oxygen, wasnt really playing with a high pressure since it affected the cut quality. On the most cutting charts the average for 6mm is about 600-800mm/m.

[@mohammedabbas2861]

Plz can you tell me max thickness for cutting mild steel with this IPG 500w

[@ACCURL]

MOHAMMED ABBAS hello pls sent email to [e-mail]

[@PanBilly0223]

6mm cs

[@lijiajia3271]

Very nice video

[@tubester4567]

how much tolerance for this?

[@ACCURL]

tubester4567 mai I have you email addrsss and WhatsApp ?

[@ACCURL]

tubester4567 pls tell me you cutting thickness and email address

[@张俊-b3x]

+/- 0.03mm

[@ikecobey6268]

Nice machine, can you send me quotation of this machine, also if do you have also the 1000 watts so that I can compare the price.

[@ACCURL]

Thanks for your message! Pls send inquiries to [e-mail]

[@ikecobey6268]

@@ACCURL thanks I will send you a request later....

[@mk3brakes569]

Hola soy de Argentina cual es el costo de esta maquina ya que trabajo con acero inoxidable haste 8mm de espesor. saludos cordiales Ricky Oviedo

[@ACCURL]

Hi Ricky OviedoThanks for you enquiry!Pls tell me you email address and Whatsapp,we will sent you machine detail and price by email.ThanksEmail : [e-mail]

[@mk3brakes569]

Hi my e-mail is [e-mail] Regads Ricky

[@rameshbehara4848]

plz send price and machine details [e-mail]

[@gatga1878]

Guys..on the same buzz..

[@kyathikasurender8]

I would like to purchase the same pl tell me the price and specifications

[@ACCURL]

Kyathika Surender pls tell us your email address and WhatsApp number

[@mastereded5072]

919700486089

[@mskchouhan9953]

what's cost and details please

[@amberzhang9068]

I will give you our product details and quotation, please add my WhatsApp[phone]

[@hirenpatel-kt6rn]

1500 w ipg

[@lemicom12]

what is the price?

[@ACCURL]

Hi HoganThanks for you enquiry!Pls tell me you email address and Whatsapp,we will sent you machine detail and price by email.ThanksEmail : [e-mail]

[@张俊-b3x]

39500USD

[@TheDetroitSlayer]

500w IPG. LOL.

[@Cnclasercrafting]

Price plz

[@张俊-b3x]

3015 fiber laser cutting machine with 500w power price is 39500USD.

[@hi-tech1246]

Wooooow!

[@tamtechkhai5363]

1000w IPG

[@nicolezhang2340]

pls add my wechat/whatsapp: [phone]

[@abhishekrajopadhye4112]

this is not 8mm 500w can never cut 8mm

[@Skylos100500]

It is 8mm, its just the laser power obviously is not 500w. Actually i had 500w and i was able to cut 8mm with the right focus distance, the speed was about 0.7-0.8m/min. But the edge quality was not as clean as in this video. And piercing takes a lot of time as well, so i had to pre pierce the parts with high pressure.