iphone 11 important display message fix

[@alfinal5008]

ic in his new lcd is removed or not? thank you

[@4Relax]

I tested method on 11 pro, and i use GX screen, so problem is i see there is a true tone ana no display message but touch does not work. When i disconect SDA line touch work but message appears. I can not find problem i remove resistor. Do you have any idea sir?

[@hardsolutions7946]

This method is works on some good quality screens i have fixed on so many phones 11 pro and 12,12 pro but didn't face any issues like u said i think that screen doesn't support original touch ic data

[@4Relax]

@@hardsolutions7946 I use jumper methods like you, and i remove resistor but this resistor has no relation with touch, so i’m confused why touch doesn’t work when i connect sda line because sda is not readed from screen because resistor is removed. I tested also with resistor also true tone ok and message but no touch.

[@ayoubchaouqui1250]

Same problem GX screens are trash. Did you find a solution?

[@hardsolutions7946]

What resistor SDA and SCL 1.8 And Ground this 4 jumper’s connection give CPU to understand that was an old genuine screen and other hand working touch ic placed on screen have an eeprom and touch functioning chips inside that touch is what we see on screen so basically we just fool the IOS that we have a original screen but we don’t have that thats why we just remove that resistor so both IC’s data mismatch and cpu get confused which one is correct when we remove the resistor there is only 1 ic (that we jumpers ) communicate with cpu and make cpu realized there is no third party screen connected i think you got my point

[@4Relax]

@@hardsolutions7946 Of course i know what idea is but GX screen ni touch working after apply this solution. When i have genue screen i transfer touch ic to screen and everything works. I did not test incell screen but i belive that incell support ic solution.

[@ericvandebroeck5130]

With original touch ic from iphone 11 or other touch ic from other iphone 11 ? Thanks

[@hardsolutions7946]

Original

[@marcoc.6022]

Where did you find out the lines on the IC. Where are the lines for 13?

[@hardsolutions7946]

I’m working on that I’ll upload a video when i find on 12 min 12 promax and 13 to 14pro max

[@markhoryt6881]

This ic direction I find

[@itzlit9873]

Hi is it possible to do this on 13promax and how, thanks.

[@hardsolutions7946]

No sir I’m working on it but I didn’t find the eeprom connections on chip whenever I’ll find I’ll upload a video on it thank you

[@itzlit9873]

I can send you 20$ if you can send me the solution

[@osafraxa]

@@hardsolutions7946hello sir it possible iphone 11 ?

[@ocotty_2086]

ciao sai se e possibile farlo anche per iphone 14 pro?

[@hardsolutions7946]

No

[@mdeep1883]

Clear picture send please brother

[@abdullahalmaghrabi6349]

Hello, I need iPhone 12 mini fonts

[@larbiiilioune7361]

I need isp point for iphone 11pro (touch message)

[@hardsolutions7946]

Sir you can find in zxw same as shown for iPhone 11 in this video both phones have same IC jumpers and you can find SLC SDA PP1.8v touch and make jumpers

[@mukhtarmirkar]

It's work on iphone 11 pro max?

[@hardsolutions7946]

Yes it’ll work on 11 series and 12 &12pro also

[@hardsolutions7946]

But you need to find connections on different places on different models

[@imamreshaid9760]

​@@hardsolutions7946 brother please send 12 or 12 pro and pro max touch ic diagram

[@dzaraing4495]

what type of copper wire do you use? 0.1? 0.2mm? and what glue?

[@hardsolutions7946]

0.1 mm and UV glue

[@arickarora7298]

When i remove resistance then my iphone 11 stuck on logo

[@hardsolutions7946]

You removed wrong resistor sir please make sure you watch carefully

[@iRandomThingsUp]

@@hardsolutions7946same for me brother i removed the exact resistor and phone stuck in bootloop

[@abusufian6623]

Bhai ic deraction Kia ha

[@hardsolutions7946]

Opposite from ground

[@ashiqbhat]

Anyone tested this? Or its just Fake?

[@hardsolutions7946]

This is work with genuine and good quality screens only

[@arickarora7298]

@@hardsolutions7946bro this is fake

[@arickarora7298]

⁠@@hardsolutions7946when i remove resistance then my phone stuck on logo

[@barsmalgaz7542]

Thank you ☺️

[@thegloryzer06]

13pro?

[@hardsolutions7946]

@@thegloryzer06 you can transfer genuine ic to new screen

[@thegloryzer06]

@ No, this is an LCD with a damaged IC path

[@wasimahmad5396]

sir iphone 12 ka bhi solution dedo

[@hardsolutions7946]

Same as shown here you just need to find i2C_SCL - i2C_SDA and 1V8 touch line on touch connector and disconnected sda line pin from touch connector because there in no resistor to remove

[@roushaan_rj]

11 pro solution??

[@hardsolutions7946]

@@roushaan_rj same like 11 but different on motherboard you may search i2c lines slc sda 1.8v touch and ground remove sda resistor like 11 and make jumper

[@roushaan_rj]

@@hardsolutions7946 yes i treid and it's work❤️ thanks

[@imamreshaid9760]

Iphone 12 or 12 pro jumper diagram please???

[@hardsolutions7946]

Hi You can make jumpers same like 11 on chip and use zxw to find SDA SCL 1.8 TOUCH AND GROUND PINS ON TOUCH CONNECTOR there is no SDA resistor to remove on 12 series so you have to remove SDA pin on touch connector

[@imamreshaid9760]

12 pro max

[@hardsolutions7946]

@@imamreshaid9760 not available sir

[@arickarora7298]

Plz don’t do this