iPhone 15 Pro | Spigen Tempered Glas.TR EZ Fit Screen Protector Installation

[@dannyumana143]

you pressed down on install tool which you were not suppose to based on installation which cased the bubbles for you. Just place tool and first contact for screen is through the middle as instructed.

[@yahnwyd]

For me this was a big upgrade because my last screen protector was unresponsive and also it had a big bubble on the right off my screen which made it unresponsive along with that it was miss aligned but the spigen screen protecter is so easy to put on I love it.

[@rudybriskar5267]

It's my go-to screen protector. I'm not even going to unbox my 15 Pro Max until the screen protector arrives.

[@BlackGokuSolos]

just be more responsible and you wont even need protection without having scratches lol

[@NESClO]

i remeber back in the day it was so much more harder to do this now its so easy and no air bubbles after using the tool for a bit!

[@yoyekyoyek]

Unfortunately Spigen missed it with the screen protectors for 15 Pro lineup. I've been using their protectors on previous iPhones, iPads, no issues. With 15 PM one was fine, but chipped very easily on the edge. Second was applied with no issues, but few hours later the halo effect started to kick in. A day later the halo was on all edges. Terrible. Apparently I'm not the only one with this issue. Replaced with Flolab 3D glass - amazing, worth the price!

[@gregg7363]

Just installed this screen protector, actually the second one that came in the box. Was thinking maybe the first one was flawed. Had the first one applied for about two weeks. I have used Spigen glass shields in the past on my 13 Pro Max and 14 Pro with absolutely no issues. 10/10. Came to the 15 Pro now and for some reason the cut of the 15 Pro glass is flawed. The protector doesn’t fully cover the edge of the screen and the glass part ends on the side of the screen which causes a weird rgb effect on the corner side of the screen depending at which angle you’re looking at it. Mostly prominent when viewing white webpages or light colored content. It looks like your screen is broken with a pink/green rgb lcd looking line. Not to mention the glass picks up way more dirt than previous models. Not sure why. Responsiveness is amazing and the screen feels like there’s nothing on it but hopefully spigen will create an updated version. Paired with a Spigen clear mag safe case.

[@sanziorodriguesdearaujonet9715]

Same here! Installed the second one for the same reason. Not to mention that the edges of this version are way sharper than the 14 pro version. Spigen disappointed with this one.

[@sebastijanprlic6321]

no bubbles here, in 1 time completely good, thanks for the video !!!

[@iM7SnaKe]

ty for the shower reminder, I forgot that after years and when applied mine need to switch to the second one as too much dust particles got in during the process.

[@chuck176]

Got this too for my 15 pro max along with the rugged armor and three camera protectors! Spigen makes the best products I use them on all my electronics!

[@skyvixxxen]

Don't the camera protectors mess up with the quality?

[@romanslejmar2431]

I have exactly same set up and feel very safe!

[@namaychopra2438]

Please compare this EZ fit with their AlignMaster screen protector.

[@furiousmojo1]

I hear a birb in the background. Sounds like a cockatiel. 😂

[@TeknoTalks]

Every time I try to record, she starts whistling

[@supernova4760]

Pro tip, turn off the air conditioning and let humidity take over ... air conditioning makes surfaces dry (gets rid of humidity) humidity is good at capturing dust and also will help with reducing bubbles.

[@eugene188]

Can the tray potentially be reused with other screen protectors for the phone? That just seems like a lot of plastic to use once, and it would be nice if you could use it on cheapo screen protectors too. I've used other alignment trays where it is just 1 tray and they give you multiple protectors.

[@TeknoTalks]

You probably could as the screen protectors would be the same size

[@gracxx162]

I have it with my 14 pro max and now with 15 pro max however in 15 pro max is way less edge to edge covered compare to 14 pro max did u notice that also?

[@NFradamantyz]

Remember if you buy any spigen case you need this screen protector because if you buy other brand the protector tend to lift the screen protector

[@TeknoTalks]

I haven’t really had that issue

[@NFradamantyz]

@@TeknoTalks Preferentially screen protector need be the same brand, thats why they talk about "Fits perfectly within all Spigen cases for seamless compatibility" in the spigen web

[@annmartensson4653]

Thank you soo much for your very informative video - the application was really easy after this 🥰

[@PaintrainX]

Make sure you know which side of the phone is up before you allign the frame. You don't want to apply the screen protector upside down.

[@adequatequality]

I tried this screen protector and initially didn't mind that that edge bubbles didn't fully go away because of the slightly curved display. But, after 2 weeks of having it on, there is so much dust and debris trapped between my case and the screen protector. Had to remove it and get a Belkin screen protector from Apple for like $50 😓

[@UbbeWankenubbe]

Yes, majority of screenprtectors suck. They don't cover edge to edge screen area and after using for few hours collect dust and look like crap. This screen protector also sucks. I have Nilkin - this one is even worse than Spigen.

[@kellymarkbalay5368]

How was your experience with the belkin one?

[@UbbeWankenubbe]

@@kellymarkbalay5368 I got Baseus, its way better. Will stay with Baseus on IP15 pro.

[@adequatequality]

@@kellymarkbalay5368 Much better. The edges fit and adhered well and it feels good to the touch.

[@kellymarkbalay5368]

@@adequatequality does it collect dust around the edges?

[@MrRandomPrankster]

If I buy a brand new phone and put on my screen protector as soon as I inbox it, should I just use the dust stick and skip the wipe/cloth cleaning?

[@TeknoTalks]

Yes you won't need to as it hasn't been used at all

[@thanostsarbos1197]

Does the screen protector have a black bezel around it ?

[@TeknoTalks]

Nope

[@valkh83]

Do you need the cleaning wipe and stickers if the new phone is coming right out of the box?

[@TeknoTalks]

No that is only to clean it up since you used the display, if it is brand new and you just took it out of the box you can just place it right on top.

[@raymondmidwell3339]

Love it its what I'm using on my 15 pro max

[@satejHujare]

It really helps me ❤ i do it in my first attempt ❤❤

[@UbbeWankenubbe]

You haven't showed the most important part - that this screen protector doesn't cover the whole screen.

[@vamos419]

It doesn’t cover the whole screen because it’s a curved screen edge.

[@n0phearz905]

Meant to work with phone cases. Which 90% of people will have.

[@UbbeWankenubbe]

Apparently there are manufacturers who managed to cover all screen for 15 pro. Nilkin, Spigen sucks. Baseus made it! Baseus screen protector is marvelous. Later on I will add video.

[@UbbeWankenubbe]

@@n0phearz905 just got Baseus, after disappointment of Spigen and Nilkin. Baseus covers whole screen and it works with my 2 different cases. I have leater case and also I do have heavy duty plastic case. Will add video later on.

[@Justmakesomenoiz]

⁠might be a handling issue beacuse I've used this spigen for many phones and never had any issues with it. There is always people that dislikes things but I'm sure that the majority will just love this one beacuse it's really good and have worked with every case I've thrown on it.

[@sergiosalas7715]

Yo compré para mi 14 pro Max , de la misma marca y me sobró uno porque el paquete trae 2 , le queda la misma o tengo que volver a comprar ?

[@TeknoTalks]

No hay nada de malo en probarlo, debería funcionar ya que las dimensiones son las mismas pero yo no lo he probado.

[@CamTheMan8]

@@TeknoTalksnot sure because the bezels are a little bit smaller

[@jbjb971]

Will the Apple silicon case work with it ?

[@shachi142]

question. is there a black frame surrounding or is this a clear glass protector?

[@VK-pl1nd]

no

[@amponsahkwame2325]

It’s completely clear

[@BCE-111]

Thanks! :)

[@pdg1877]

I also have lovebirds ❤

[@Dmitry_Fomichev]

Спасибо. Было интересно и полезно. 🎉

[@sohampal3643]

Is there a cutout for the camera?

[@romanslejmar2431]

No, in fact no cut needed

[@ginodavis]

Can it fit other brand cases

[@TeknoTalks]

I had no issues using other cases

[@ginodavis]

@TeknoTalks thanks for reply. I have ordered spigen tempered glass and Ringke fusion case for iphone 16 pro

[@Ativ01ski]

Does this work with the tough armor case? In heard there was an issue with edge to edge protector? Thanks!

[@TeknoTalks]

Will be testing that out soon!

[@TornadaRomaniei]

yo can u actually test this out with the tough armor case, im actually curious ofc only if u can. Thanks@@TeknoTalks

[@jbjb971]

Is that better than the Belkin ?

[@davidjacobs6244]

No,in my opinion.

[@Phaios95]

Do I have to worry that it scratches the metal frame?

[@TeknoTalks]

Nope I didn’t have any issues

[@ooooooote]

Какое лучше 092 или 093?

[@TeknoTalks]

Что вы подразумеваете под 092 и 093?

[@ooooooote]

@@TeknoTalks синий или чёрный под blue titanium?

[@ooooooote]

Да, в чем разница у этих стёкол, с черными краями и прозрачными AGL06893 и AGL06892?

[@virt23virt]

what a waste of plastic :(

[@yahnwyd]

?