🔧iPhone X & XS Max Glass Only Replacement - home solution👍

[@YouTVEntertainment]

YEAH, NO OCA/DEBUBBLER MACHINES NEEDED. THIS IS VERY HELPFUL. THANKS A LOT

[@asonunique4349]

thank you for this video. listening to your music really helped me learn what you used, how to properly pop the screen off, what each thing I'm removing is. love the abundance of plentiful information. I don't even need to search for a whole different video with more information

[@henryjohnston6782]

Shush no one asked

[@henryjohnston6782]

Where does it say it was a tutorial?

[@ronpalmer1371]

Yeah, He showed us himself doing it but no instruction on how to do it ourselves 🤷‍♂️ also some of the tools he used made it seem unviable as a home repair.

[@jonanddy]

the music did that are you fr

[@CHADKANDARIS]

not sure why people are afraid to speak in tutorials like this. Many important things could probably be passed to the viewer by the power of speech.

[@JerryMobilePL]

You are sure, but my English is not perfect and 90% of my subscribers are from USA 😀

[@salomonkane8359]

@@JerryMobilePL I love you. Amazing video.

[@penhi-tech1806]

I don't agree , I hate it when people keep talking, watch and observe, that's all you need.

[@mohammadullahnasrat8022]

Don't you see that the video is running few frames faster than the normal? If he would have talked he may sound like baby chick;😉, I would rather subtitle for crucial Points!

[@knexfan100]

@@JerryMobilePL The guy that taught me how to solder new charge ports to phones had a thick arabic accent and defaulted to speaking arabic halfway through... I still learned just fine and still use that skill for my repair shop years later. Broken english is better than nothing. Spoken repair videos are always appreciated.

[@kylecullenplays4111]

What was the tool you were using on the oled after you had removed it from the glass with the wire, to remove the adhesive

[@chordswardfelicia4475]

Yes yes finely I found this video. I was looking year by year how to fix iPhone screens with loca glue. Because the bubble and laminator machines are really expensive. And this is the cheapest way. Thank you man for this video. You save me a lot off money with the expensive machines. Thank you again 🔥🔥🔥🔥🔥🔥🔥🔥

[@feliperodriguez6574]

Very inspirational for the repair community!!!

[@killer2k149]

Polak robi niemozliwe naprawy.Podziwiam i gratki ;)

[@JerryMobilePL]

Dzięki 😁 Pozdrawiam również

[@kacper2290]

ja w lonynie i iphone 6 robie

[@Monsster777]

Jaki koszt u ciebie takiej operacji?

[@percyyt7201]

I can definitely do this at home 😂

[@ayaan4594]

Hey I’m only 13 I have repaired and fixed more than 30 iPads and 3 phones at home it’s really easy if you learn how to do it better try it on a spare phone that you have ?

[@tobiasgingerich5731]

@@ayaan4594 yes because we all have glue remover a heating element a a screen glass guide and all the other hand tools at home and we can’t forget THE HEATING ELEMENT

[@ayaan4594]

@@tobiasgingerich5731 my phone is in an repair shop right now never mind 😂😂😂🤣🤣🤣🤣

[@CetutsDS]

Man i just felt now dropped my iphone x so hard to the ground its cracked on the side a bit pff..

[@azharsaleem6436]

After watching you have to say thanks

[@wojteq_t]

Jestem pod wrażeniem, gratuluję umiejętności i życzę sukcesów w pracy.

[@eswagyy]

What tool did you use that spins and take off the glue?

[@l-xd1140]

Mit was kleben sie das Glas auf den Bildschirm (11:58)? Würde das gerne zuhause machen aber weiß nicht ob man auch nur das Glas auf das Display kleben kann ohne diesen Kleber den sie als x aufgetragen haben. Ich hoffe sie antworten würde mir helfen ☺️

[@KingSkrap]

What’s the tool that you used to pull off the glue on the digitizer called?

[@HonzaMachoo]

why do you take apart the inside of the panel when you change the windshield. thank you for answer :)

[@shahsuleman7552]

Nice. where do you get that glass, glue and those tiny fastners..please provide link..

[@daniel-swimmin]

Nicely done ✅ but you could edit the video with some important tips, you didn’t had to say anything just some writing

[@quchi7232]

How much does it usually cost? My iPhone xs max only have a cracked outer glass.

[@suruchishah6466]

Hi,can u please tell me how much it cost for glass replacement approximately

[@ElAndresRodriguez]

Where did you get the mold and clamps?

[@textchx]

Hey great video! What was that yellow spinning tool you used to get the screen cleaned off? Thanks!

[@courtneythompson5067]

Same thing I'm wondering. That thing looks amazeballs and would most definitely be a super handy tool to have in screen repairs. Please let us know what that tool is.

[@quetal6737]

@@courtneythompson5067 it is a oca remover machine

[@harmanpreetchehal1092]

Price for changing glass of iPhone X plz tell

[@dimuthranasinghe80]

Amazing video Could you please mention How much temperatures setting on separator machine And what loca glue Also what uv machine and the machine settings The paper you put on the separate machine and the screen Also what kind of string And the chemical names you used Thank you

[@gazio6450]

Desription bro ;)

[@ronnelbagamasbad19]

IS THAT UV GLUE? SAME GLUE FOR UV TEMPERED GLASS I WANNA TRY THAT ALSO SINCE I DONT HAVE AN OCA MACHINE FOR SCREEN LAMINATION

[@LeetPanda]

wow loca! i didn't see you for a years my good friend

[@joshtai9660]

Hey Jerry! Nice educational video. I wanted to replace my iphone x screen.. but isnt it possible to just do step 4 and 5? I wanted to ask why you removed the speaker&sensor assembly and why the frame got replaced as well. Thank you!

[@ifixall5658]

Josh Tai bcaz if you don’t take them might be going to damaged if the sensor damaged also Face ID no more works. Frame should be take out otherwise you can take the glass out also won’t inside the mould

[@mambrake]

If i send you my screen, How much would you do this repair for?? You got a link??

[@arthurhernandez4527]

got you for $80

[@mambrake]

@@arthurhernandez4527 you late brother

[@arthurhernandez4527]

​@@mambrake lol just seen bro follow me on Instagram twitter facebook or tiktok @lafinestrepair

[@1999tacotrd]

Guess the newer iPhone screens are made different? When i tried to use loca on iph6 lcds back in the day the glue would always get in the lcd and ruin the display

[@dalebassett9474]

Just a tip if you want to remove any iphone glass or separate it stick the oven on 220° with a baking tray in there covered in foil and let it get up to heat then pull out and lay the lcd glass side on the foil and it's comes off very easily ;) no need for heat plate

[@akshais2398]

Polarizer will burn, causes discoloration

[@saltnateusmania7799]

@@akshais2398 hi , then which supposed to be set , and which kind of glue remover should be used from LCD

[@mohamadfahmibinmatrohim3683]

What is the name of the thing that u use as housing while u put glue on it? That yellow thing?

[@sandronunes93]

Good job man. Lots of steps but job done ✅

[@nikineebay1778]

Hello dear, i went to change the glass in a repair shop, but it's showing a warning message "unable to verify this iPhone has a genuine Apple display". Did the repair shop changed my original screen or it's a normal thing. thank you

[@LOOTS243]

Why do you have to take off the supporting frame? For me it seems that it is only connected to the back

[@Eren-pn7ew]

Display quality will be good rght?

[@shaarifshafi]

I did the same now my i phone kinda laggs mainly the keyboard what do you think?

[@daweitowalk]

Do you find trying to repair glass without a laminating machine can be problematic as the resulting surface may not be perfectly flat? At the right angle, under right amount of light, this could be noticable when the phone is turned off?

[@icy_bit7306]

Use a book

[@helaal92]

why did you and all others in other videos remove the metal bezel before removing the glass ? what could be the problem if it wasn't removed ?

[@anthonmaravilla5628]

I want to learn this kind of repair i hope we can meet in the future to learn more things about this thank you

[@JerryMobilePL]

Soon will be complete 10 videos about screen refubrish, with subtitles and detailed 😉

[@dennisjohnminicz8036]

Nice video!! One question, Do you need to cut/break housing to remove lcd? Cant you remove it without breaking?

[@JerryMobilePL]

Yes, it can be done. But only if the glass is not very hard broken :D Not cutting the screen frame needs to take it off uo, so parts of the glass will break the display.

[@ghost_1102]

Will truetone still work if the glass is replaced? thank you in advance for the answer^_^

[@JerryMobilePL]

Yes of course 😉

[@TheLetocha]

18:25 używasz kleju E8000- polecasz to rozwiązanie niż te wycięte uszczelki z niebieskiej folii??

[@lobai0124]

It really is home solution, totally different from my screen factory. I think this screen only can work one month. And you need do same step at next month

[@JerryMobilePL]

Nope, this phone still works for my friend 😉

[@mikeonofre6042]

Does it recovers the water resistance?

[@diyfixtool830]

Thank you for sharing, this repair video sharing is very detailed and very helpful to me. Thanks again for your sharing.

[@hackit1001]

Bro u did amazing job Would you pls share the tools that u have used

[@moosakda4890]

Hey dude, there are adhesive for screen selling around. Why do you still use glue?

[@JerryMobilePL]

Becouse glue is stronger and cheaper 😁

[@joshrgaming2606]

@@JerryMobilePL But you can't open up the phone easily for future repairs. You may even break the screen getting it back up.

[@mrtelephoneman4971]

JoshR Gaming its not actually glue, it’s an adhesive that a lot of us tech use. Meaning if you need to reopen device it can be heated and/or cut through

[@Deleted_01]

How much would you charge to fix a phone? Cause I broke mine today. Since useless Verizon keeps giving me fixed phones instead of new ones. This phone already had a chip in the glass. That why it cracked in a few months. But yea I live in Virginia. I want to know how much you’d charge to replace the screen.

[@nikelquint]

why didn't you cure the loca while the screen and glass were in the alignment frame?

[@paweadamowicz2034]

Thats exactly what i thought

[@awm7728]

What is the name of the material used before pressing the glass and what is the device used?

[@amulyashrestha7700]

Thank you So much for teaching, it really easy to understand and I fixed my iPhone. 😮 I am so happy to see my new iPhone screen ❤

[@ostora41]

True Tone and face id désactiver or no ????

[@benjaminalcide803]

What glue did you use to connect the screen?

[@kurtba8180]

I suppose that’s loca glue

[@zacelbin8786]

So if it’s just a glass replacement couldn’t this be done without all that disassembly? Just lay the whole phone on the screen separator, separate the screen and then laminate in a new screen?

[@JerryMobilePL]

I understand You, but belive me- it's impossible in this model 😉

[@i.ttroubleshooting9585]

you are a genius

[@turekkris853]

Kozak gosc szkoda ze nie wiedzialem ze to mozliwe xaplacilem krocie za serwis screen plus robocizna a na koncu koles ;;yeah it’s ok you will get used to it without Face ID,, ps ile taka naprawa koszt mniej wiecej.? Pozdrawiam

[@JerryMobilePL]

Dzięki 😁 Koszt w granicach 500 zł, ale po naprawie WSZYSTKO idealnie działa :D

[@turekkris853]

A zapacilem ok 1000 pln ,no coz madry Polak po szkodzie

[@JerryMobilePL]

Życie, samo życie 😏 Na przyszłość zapraszamy, serwis Pama Białystok 😊

[@itsysr]

Where to buy touch glass and frame

[@ashclark3769]

Using a metal tool to lift flex cables is a no no man!!

[@amazonmoeski1901]

thats only in america, where people wear seat belts

[@alimemis3864]

This is soo amateur his using metal tools for sockets also he disconnected screen sockets couple times before battery socket you are lucky you didn’t make short circuit

[@wesss9353]

How do you get the connector on so quickly? Screen connection. I'm afraid that I will break it.

[@yashmayekar_MIS]

I m from India, please let me know how I can get it done from you, same iphone-xs-max same condition

[@emadhamidnaja]

Just go to a local repair shop buddy 😂

[@localsweden3280]

Hello my friend. Im from Germany and what do you think? For how much would you repair my IPhone XS broken glass like yours? I See youre very smart in doing this🤔😃

[@JerryMobilePL]

Hi 😁 We make this for about 100€ in Poland, shipping back with DHL. Please message on Facebook ;)

[@JerryMobilePL]

But for everyday we do it by professional with OCA glue

[@kamronjenkins9883]

Is it only the outer screen I need to purchase or the whole digitizer ?

[@Craxocarder]

Can we replace the front glass of gx display?

[@nassapassa6579]

Is this possible for an iPhone 12 mini in the same way?

[@egyptianman25]

great work what is wire thickness.

[@JerryMobilePL]

0.05mm

[@sunnysingh9577]

Mujhe bhi change karwani hai kitna price hai change karne ka plz reply

[@grandtheftauto1233]

Good job! Liked the video

[@theowink]

What does the glass replacement cost if I send the screen?

[@JerryMobilePL]

About 100$ 😉

[@theowink]

8 months later now.. Still 100$?

[@nanakcommunication]

check camera zooming is working ok or not

[@lucas_ndm5757]

Czym przykleiłeś szybkę do wyświetlacza ?

[@isaacyop]

Donde te ubicas ?? Mi celular solo tiene daño en el cristal y no le quiero pagar a Apple por un cambio completo sigue funcionando todo

[@sotiristhita5118]

Hello,what diameter of wire you used?And can i do this without a vacuum holder just with a hair dryer and wire?

[@JerryMobilePL]

Hi 😁 I used 0.05mm wire. Of course You can, but You need 2nd person to hold the screen. If You heat the screen by hairdryer wire will go nice

[@sotiristhita5118]

@@JerryMobilePL if i use 0.10 its to thick?Will i have a problem?Also i have repaired a iphone 7 screen by this way,is the iphone x screen harder a lot?

[@itskracktyt645]

Hallo funktioniert das auch bei dem iPhone 11 hab eins günstig bei ebay gefunden mit kaputtem Glas

[@rogercen5909]

Hi... where we can find .. the glass for iPhone X? Do you some store?

[@Guyindrip007]

Ebay just search front lense glass

[@louisharkless7527]

What is the proper name for the gold plate that the iphone is put in while you add the loca and glass?

[@JerryMobilePL]

This is lcd mould 😉

[@mrleet6247]

Great video thanks for that👍 the screen replacement suggested in your description has oca glue on it.

[@mrleet6247]

Oooh I see now you can peel it off. My bad😊

[@CS-jl9pq]

Hi Jerry, where did you get the gold XS MAX screen alignment tool as shown at 11:15? Thanks

[@reagandiaz3388]

Chidzeyy to me it looks 3d printed.

[@gazio6450]

You Can easily find them on eBay :D Maybe search for something like glass screen aligner or something ;)

[@opsdragon5472]

Is the metal frame a replacement or the original one that you cut in half?

[@Guyindrip007]

Replace ment you can buy from ebay easley for 8 dollar

[@opsdragon5472]

Ok, thanks bro 🤘🏻❤️

[@jakegub]

Searching for "Middle Frame" will help you find the right part. I failed using "display frame", "metal frame", "front glass frame", etc. Middle Frame is the way!

[@danielrozario1290]

Sir my iphone X fell in water i went to the shop they said that the screen folder wil change but can this also cure my problem?

[@rabiach5033]

Please tell me the any shop location in pakistan where I can get that option 😢😢

[@sillydubbs]

Is 3d touch working after replacing glass?

[@JerryMobilePL]

Of course yes :)

[@metrocaptain]

Bardzo dobrze! I wouldn't think of going to these lengths to replace the digitizer.

[@nathanhelliwell2524]

Why the use of the mould if you just lifted off before it setting?

[@bartekkarczewski2858]

Bomba robotaa.. Bardzo pracochlonna i trzeba byc bardzo ostroznym i precyzyjnym. Mam putanko czy konieczne jest demontowac “bezel frame” przed usunieciem szkla?? Czy mozna go zostawic i poprostu zajac sie usunieciem szkla od razu. Pytanie drugie dlaczego polowa wyswietlacza nie reaguje na dotyk po usunieciu starej szybki ?? :(

[@JerryMobilePL]

Dzięki 😁 Tzw bezel koniecznie musisz usunąć na początku, zastosowany tam klej nie jest typowy, jest on raczej podobny do kropelki itp. Nie pozwoli na usunięcie szkła w pierwszej kolejności. Często po zdjęciu szyby dotyk nie reaguje tak jak powinien, najlepiej go sprawdzić przytrzymując drugą ręką ekran bez rękawiczek, mimo to nie zawsze działa. Po naklejeniu nowej szyby czułość i działanie wraca do normy 😉

[@bartekkarczewski2858]

@@JerryMobilePL dzieki wielkie i ozdrawiam . Ja jednak dwa razy usunalem uszkodzone szklo bez problemu bez usuniecia “bezela” na pierwszy rzut oka brak jakich kolwiek uszkodzen, screen dziala popodlaczeniu przesuwa sie na boki ale gorna Czesc screena niestety nie dziala , ale dolna tak. I. to w dwoch przypadkach podobnie. Mam brak jakichkolwiek idei co do usterki .. wiec bede musial poprostu wieminic na nowy screen :( :(

[@JerryMobilePL]

@@bartekkarczewski2858 możesz wymienić też sam dotyk, spójrz u mnie w filmach jest o tym materiał 😁

[@bartekkarczewski2858]

@@JerryMobilePL No , no , widzialem ten filmik kolego. To juz dla mnie za duza wyzsza szkola jazdy,, te lutowanie pod mikroskopem, ,,szacunn.... Dla mnie testem mial byc moj pierwszy zepsuty screen i wyszedl calkiem spoko po sklejeniu .ale niestety z jakiegos powodu polowa tylko dziala :( tyle roboty....echh . ..

[@tomekturek7645]

Polskiego się nie spodziewałem

[@glebsokolov9959]

О, тут даже поляки есть :)

[@KGinkus]

Loca which dont need UV light better then which need UV light or light its just knly difference?

[@renderflash]

You don't need the mould realy, do you? You align it by hand afterwards. Is the touch sensitivity the same as before?

[@JerryMobilePL]

It is 100% the same. I don't have a mould so I made it "on my eye" 😁

[@renderflash]

@@JerryMobilePL Do you think it would also be possible to replace the digitizer with this (LOCA) method?

[@vaithan3481]

So after separating and removing the loca you used IPA to clean the excess off of the lcd? Or was it something else?

[@JerryMobilePL]

Yes it's IPA

[@kacper2290]

its oled

[@nishantsharma1075]

Will true tone work after this glass replacement

[@JerryMobilePL]

Yes should work

[@stefstefke7690]

Jerry Mobille , i order i iphone x front glass only like yours,, does it comes with protected film on bothes sides? because it seems that on the part that must be glue have a transparent film on it or is this normal or must i peel it off? thx

[@dalebassett6119]

If I can give some advice when doing this repair leave the screen protector on the front of the glass on believe me once you get the oca glue on the glass it will be a nightmare to remove so please cure the glass with screen protector still on hope this helps anyone trying this method will save you a big headache

[@amrishshah6354]

How can I identify the glass is original or genuine product

[@antobanto2383]

Apple doesn't sell just the glass on it's own. All replacement glass are aftermarket

[@mayankarora6734]

Does this repair hamper the waterproofing of the xs max?

[@matthewhiegermh]

Yes

[@Scottsman1992]

whats the Holder your using for the phone when you put the new screen on?

[@chordswardfelicia4475]

Read the discription

[@Scottsman1992]

@@chordswardfelicia4475 I read the description they don’t say way that gold piece was that he set the screen in to put the new glass on so before you try to get smart in the comment section be sure you got the info to support your response 👌🏻

[@itsysr]

Is this compulsory to install new frame can we use old frame and when we remove display frame is it breaks that time or not

[@grantharvey4838]

Late reply. But yes you can use old frame

[@Chaudhary_manav]

Will face id work after glass replacement?

[@JerryMobilePL]

Why not, of course yes 😉

[@Chaudhary_manav]

@@JerryMobilePL thank you so much❤️❤️

[@matinesmezier121]

My iPhone 13 pro max displays all white How to contact you and send it to you so that you can change for me please

[@mobilyphone88]

Like super hand 👍🏻♥️

[@EM-kz6uw]

Can I use LOCA TP 1000N ? Do u recommend?

[@JerryMobilePL]

You can, but better is 2500

[@ojmusic199]

Hey dude, what's the name you used for glue remove?

[@ernec.5326]

You can use lighter fluid just completely remove it with 99.9% alcohol.

[@ce4123]

Wait so he didnt change the screen just the glass right?

[@bobchannel8007]

yes

[@salomonkane8359]

No

[@gulmulmiah1919]

Sometimes I get bubble on side of screen , near the bezel, when I clamp screen down. Looks like the glass separated from screen a little. Why does this happen?

[@JerryMobilePL]

Bad OCA (the best is Mitsubishi), too much of temperature or too long in autoclave- then oca is not enough hard and air goes beteeen glass and display

[@gulmulmiah1919]

@@JerryMobilePL I'm using Loca. Sometimes after curing with UV everything is fine. But after a few days there is bubble on the side near bezel. Or when I glue screen back on device and I use clamp to squeeze it down and hold iy in place the bubble appears too. I think maybe I'm using too much loca and too much pressure when glueing screen back? What do you think?

[@tonytony-zt8np]

Why did you make a glue when you closing screen what if you crack it again just use tape