Ironworkers getting a stubborn I-beam to fit: "raw" construction footage #2 from Ⓗ Week 55

  Рет қаралды 46,665

Hospital Construction

Hospital Construction

Күн бұрын

When the ironworkers are assembling the structural steel frame of the building, sometimes an I-beam won't quite fit unless they tweak the structure a bit. This video shows an example of that. The first beam fits fine, but then they struggle for a while with the second beam until an "adjustment" is made to the structure.
Usually I speed things up, time-lapse style, but every so often I include some original "raw" construction footage at original speed with original audio. This video was also in Week 55's Weekly Time-lapse, but there it was sped up with music, whereas here it is at original speed with original audio. I use the term "raw footage" loosely. It is not completely un-edited - the footage has been color-corrected, stabilized, and titles added, for example. By "raw" I mean the footage has just been minimally edited, with no attempt to "tighten it up" or "tell a story" or any of those kinds of editing processes.
On this channel, we're following the construction of a new 12-story hospital that will occupy an entire city block in San Francisco. This video is from Ⓗ series construction week 55. Construction clips set #2, July 15, 2015.
This video is not endorsing or recommending, nor was it endorsed by, any business, product, or organization. The appearance of, or mention of, any person, business, product or organization in it is not necessarily an endorsement or recommendation of or by that person, business, product, or organization. This recording is of views and scenes visible to the public.

Пікірлер: 18
@sloaneisenbart9347
@sloaneisenbart9347 3 жыл бұрын
11:22 bro with his foot on the anchor has alot of faith in the wire, and a misunderstanding of what kind of tension its under.
@benuabaja5588
@benuabaja5588 3 жыл бұрын
God job
@HospitalConstruction
@HospitalConstruction 9 жыл бұрын
Ironworkers getting a stubborn I-beam to fit: "raw" construction footage #2 from Week 55. When the ironworkers are assembling the structural steel frame of the building, sometimes an I-beam won't quite fit unless they tweak the structure a bit. This video shows an example of that. The first beam fits fine, but then they struggle for a while with the second beam until an "adjustment" is made to the structure. Usually I speed things up, time-lapse style, but every so often I include some original "raw" construction footage at original speed with original audio. This video was also in Week 55's Weekly Time-lapse, but there it was sped up with music, whereas here it is at original speed with original audio. I use the term "raw footage" loosely. It is not completely un-edited - the footage has been color-corrected, stabilized, and titles added, for example. By "raw" I mean the footage has just been minimally edited, with no attempt to "tighten it up" or "tell a story" or any of those kinds of editing processes. On this channel, we're following the construction of a new 12-story hospital that will occupy an entire city block in San Francisco. This video is from construction week 55. Construction clips set #2, July 15, 2015. This video is not endorsing or recommending, nor was it endorsed by, any business, product, or organization. The appearance of, or mention of, any person, business, product or organization in it is not necessarily an endorsement or recommendation of or by that person, business, product, or organization. This recording is of views and scenes visible to the public. #construction #ironworkers #ibeam
@MrJonah53
@MrJonah53 6 жыл бұрын
@Jerry Brinkley That would work if they were near the ground, but in this case all steel work below would hold it tight.
@m3pilot86
@m3pilot86 3 жыл бұрын
I never worked in the field, but I was a structural steel estimator many years ago. I think we had very good detailers and shop personnel. Still, I imagine that there were times when the iron didn't fit exactly. At what point does a connector determine that the piece needs to be modified, and can the modification ever be done in the air?
@andornot4988
@andornot4988 2 жыл бұрын
Be tolerant, or bend
@amirmehar4089
@amirmehar4089 7 жыл бұрын
Very nice
@patmcbride9853
@patmcbride9853 4 жыл бұрын
10:43 Oopsie! dropped a tool.
@vinnyoombotz3132
@vinnyoombotz3132 8 жыл бұрын
good job, thanks for sharing.
@HospitalConstruction
@HospitalConstruction 8 жыл бұрын
+vinny oombotz You're welcome!
@HussainHussain-uq7fb
@HussainHussain-uq7fb 4 жыл бұрын
Nice I'm 10 years work this
@mitzvahgolem8366
@mitzvahgolem8366 6 жыл бұрын
nice now try this with 2 green horns
@barryburton7755
@barryburton7755 5 жыл бұрын
So your an expert from day 1 huh never a beginner or green horn ya self ...every one got a learn buddy
@davehartnett2901
@davehartnett2901 4 жыл бұрын
mitzvah golem green horns don’t connect in larger cities. They’ll have them throwing decking or doing bent plate.
@kenbrewsaugh2473
@kenbrewsaugh2473 4 жыл бұрын
Don't know why we still build these buildings out of steel!!! Espicaly now that we know a simple furniture fire will drop them like a controlled demolition!!!!!
@Skoot61
@Skoot61 4 жыл бұрын
- Haha.... no shit!
@rolandogulen5485
@rolandogulen5485 2 жыл бұрын
welder sir ay bimem irektor
Ironworkers: "raw" construction footage #4 from Ⓗ Week 55
20:07
Hospital Construction
Рет қаралды 10 М.
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 15 МЛН
Ironworkers: "raw" construction footage (Ⓗ Week 44 construction clips set #2)
32:43
Meet the Members of Ironworkers Local 8
28:30
BuildingWisconsinTV
Рет қаралды 12 М.
Nerves of Steel: see St. John's from 50 metres up
9:54
CBC News NL - Newfoundland and Labrador
Рет қаралды 218 М.
1 Year Renovation of a 100 Year Old Silo | Start to Finish
38:21
Worzalla Brothers
Рет қаралды 6 МЛН
Ironworkers: "raw" construction footage #1 from Ⓗ Week 55
19:51
Hospital Construction
Рет қаралды 76 М.
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41