IS-EG NGAL Full Power IR and VIS Laser Unboxing from Specprecision (Not Somogear or InvisibleSight)

$40 off coupon code and direct link to purchase at the bottom.
Unboxing video of the IS-EG NGAL. This was the 2nd NGAL I ordered. The first was from egtactical, who never shipped, and I had to get a refund. The 2nd time i used a different supplier, and delivery took about 30 days. This not the warrantied and rebuilt unit from Found Industries, aka Invisiblesight. Will be making a night demo video shortly.
Night video:
• IS-EG NGAL ( Specpreci...
Use my Affiliate link to purchase:
www.specprecis...
Buy $60+ VIP05 gets 5USD discount
Buy $110+ VIP10 gets 10USD discount
Buy $220+ VIP20 gets 20USD discount
Buy $330+ VIP30 gets 30USD discount
Buy $440+ VIP40 gets 40USD discount
Buy $550+ VIP50 gets 50USD discount
Buy $660+ VIP60 gets 60USD discount
Buy $770+ VIP70 gets 70USD discount
Buy $880+ VIP80 gets 80USD discount
Buy $990+ VIP100 gets 100USD discount

[@skullofserpent5727]

What is a max range for ir illuminator?

[@rustyricky6684]

I’ve had this in the “shopping cart” for 3+ weeks now… with only a $5 coupon code. I also have some of the aftermarket switches in my cart… with the 14” and 7” cables. 14” for the NGAL and 7” for Surefire light… I have 2 different set ups right now with the GBRS hydra mount. I think I’m going to pull the trigger on this NGAL now with your $50 coupon code!! Thanks for the video

[@B.Roth.]

Good video. Did you end removing the blue screws?

[@The2AinMD]

@B.Roth. Yes, I removed the blue safety lock out screws. There is a significant difference between low and high power. Everything is functioning fine so far now that I installed the pressure pad properly. A quick test outside shows the green about a foot lower elevation than the IR at 50 yards, but otherwise very close in windage. I plan to do a side by side with the somogear peq this weekend.

[@B.Roth.]

@@The2AinMD sounds good. Do you know if you received the full power version or the less powerful one? At one point they were selling two different ones I have both.

[@The2AinMD]

@B.Roth. I ordered and received the full power version. I don't have a lpm to read actual numbers, but I do have other lasers and lams, and based on my experience with them, this unit is definitely higher power.

[@rustyricky6684]

Can you do another video showing if the vis laser is co-aligned with the IR laser?!?!? Would love to see how close they actually are, as I will be wanting this device to be fairly close, so I don’t have to choose between sighting it in for only day or only night time shooting.

[@The2AinMD]

@rustyricky6684 for me, they are "close enough". I actually re zerod the rifle this NGAL is on today. At 100 yards the vis was about a foot lower than the IR, but aligned vertically. That's close enough for me to get a rough alignment to a red dot at 100 yards if I move the NGAL to another rifle. I plan to shoot another video later this week, showing exactly what you are asking for.

[@rustyricky6684]

@@The2AinMDthank you for the reply!! I was hoping for closer, as it is advertised as having less than a 4” at 100 yard co-alignment…. But would love to see the video if you do get it done!! Thanks again

[@The2AinMD]

kzbin.info/www/bejne/qqbPmHqkqblooaMsi=A_s7kf0bE-nXZ58i

[@rustyricky6684]

So I just went to place my order… along with a couple of other things and my bank declined or stopped the purchase and said it is fraud… is this website legit?!? Should I even try to continue ordering from this site?

[@B.Roth.]

Yes, some banks just do that because it is out of the country. But yes, the website is 100% legit.

[@The2AinMD]

@rustyricky6684 yes, site is legit. When the bank calls confirm the purchase. And use my link and coupon codes.

[@TheEfruge508]

Do the diffuser caps work on these? I read that the ISeg version from foundidustries is the only one with functioning diffuser caps

[@The2AinMD]

The diffuser caps do not work as diffusers. Even though they were advertised as functional.

[@TheEfruge508]

Ok, thanks for the info

[@Klikklikboom0911]

What tape switch does it use if I wanted to by a unity switch?

[@iamnotacriminal]

How’s the co-alingment that’s my biggest complaint about the fp LA5C i bought

[@The2AinMD]

Green Vis is about 1 foot low at 250 feet. Good enough for me. I'm not using the vis anyways.

[@The2AinMD]

kzbin.info/www/bejne/qqbPmHqkqblooaMsi=A_s7kf0bE-nXZ58i

[@Jon.151]

Does the circle button on the pressure switch work as over-ride(no matter in what mode, the vis laser on)?

[@The2AinMD]

@Jon.151 yes.

[@Klikklikboom0911]

What type of tape switch does that use if I want to buy aftermarket unity switch?

[@philjimito7250]

LA23 plug tape switches/ pressure pads.

[@lorteti]

These are completely out of spec what they advertised. The co-alignment is way off, useless.

[@The2AinMD]

Vis is about 1 foot low at 250 feet. Windage is practically dead on. I'm happy. I don't even care about the vis.

[@lorteti]

@@The2AinMD How can you be happy? The spec says less than 4moa, yours is 16moa off, that's garbage.

[@The2AinMD]

@lorteti the illuminator is great, the IR is finer and has less bloom than the Somo. VIS is completely useless to me. But if I did need to dial in the zero in the daytime, green 12" below my red dot.

[@B.Roth.]

Do you have one?

[@lorteti]

@@B.Roth. I have two, one with VCSEL illuminator, ordered from Invisiblesight. A few friends can wait, so they bought this one, and all of them are out of spec, broken after a few shots.