IS ON BOARD AIR A MUST FOR YOUR TRUCK?

INSTAGRAM: eddieslife

[@hectorrodriguez8486]

Hey Eddie since we are in quarantine and have nothing to do, can you upload a story time on how you built up your business and how you found different methods to get income, it would be appreciated. 👍

[@bradyvngle91]

Where are the story times

[@uncbroyoda4077]

I bought one and never installed it. Now 6 years later I want mine installed.

[@randyvanetta2396]

I can’t believe you don’t have more followers. Love this channel. Keep up the great work.

[@mrbacklash]

If you have your truck idling your voltage will be higher and the compressed will run better to overcome the voltage drop

[@Fordgroup00]

Wow! I would have thought your system would push better. They MUST use a ton of air, then I’ve got an on-board air system I made. I need to swap out my 2 tsunami pepboys pumps for viair someday. I don’t keep my tank full and I put back-flow check valves in place

[@stevencobb8240]

You should try the vevor air Jack with the onboard system and see how it works

[@jasongardner1910]

What air system are you using? ARB all the way

[@tacticalfireman9673]

Bro, aren’t you scared with that valve sticking straight down on that air tank? If you off-road, that thing would get snapped off. Sweet rig though

[@EddieLife3500]

If I went off reading yes but I never do

[@jchefboyardee]

Where is your spare tire?

[@homeguy4]

You should run the truck when you use the compressors. They will get the proper amps when running. Gotta thank China for this chinga stuff.

[@andyxxgerico]

Arb offroad compressors are also really great, they have a pressure switch that shuts off at 150 psi and turns on at 120 psi, supposedly you can also run air tools with no tank. Arb twin compressor

[@alexandergonzalez8738]

Yo Eddie what are you doing with the old ding ding lights? Let me know if you’re willing to sell them. Also.. let me know if you are going to need to use some scaffolding when building the new garage. Thanks

[@temocastilla2686]

You should have the truck idealing when u are taking current off of it just a piece of mind

[@TattooedNSnappedBack]

What size lift and tires are on this truck

[@rebel1333frank]

Off roading we use 30 pound CO2 tanks no matter if theres %5 left in the tank, you'll never lose pressure

[@michaelbarrera6122]

Did you have to permanently remove your spare tire?

[@ZampostOk]

Does the air compressor ever overheat and it just stops working?

[@EddieLife3500]

Not that I have ever experienced

[@ZampostOk]

@@EddieLife3500 thank you for your content !

[@slayermtb_7848]

Hi Eddie, I appreciate the great content. I have a REQUEST for a video on how you hook your toy hauler using your Air bags and weight distribution hitch. I have a similar set up as you (Ram 3500 limited crew cab SRW with a Momentum 29G )and there is a lot of different opinions online how you should set them up. I purchased the air bags as I was blinding oncoming traffic with my headlights. I have installed the air bags but haven’t used them yet due to the travel restrictions. Thanks in advance !

[@kixforrest2358]

Eddie: A bit off topic - but when you did your deletions on your Ram - did you do anything to the CCV system? If so can you share? Thanks Lonnie

[@1hasbeen531]

Your pop is just sitting back, and waiting to laugh as that little guy makes you pull your hair out!

[@Builttolastdenali]

Eddie, how did you set up the quick disconnect to go out the rear without drilling through the bumper like most people?

[@EddieLife3500]

I just made a little L bracket and welded it in the back

[@Builttolastdenali]

@@EddieLife3500 Ahh okay thanks bro

[@mikemiguel5297]

What are you using on your tires to keep them so black? And do you store your boat somewhere else?

[@anthonyvintus4512]

The top pad on the jack should screw up an down

[@griffin3063]

Eddie what are you running psi wise in the Toyo Mts and do you like them so far?

[@joelotto2139]

For the lights that are yellowing and are getting replaced try putting/using UV protection sealant or glass coating to keep them looking new and protected from the sun

[@toolhead147]

On board air a must for train horns. Everything else can be done by a battery inflator or a high torque impact gun. Another plus those batteries can be charged with any 12v outlet. Now all we need is a Milwaukee Fuel Jack.

[@dirtridingcarbajal9347]

Eddieslife what tire shine do you use on your truck tires???

[@5150cash]

LMFAO he's too funny. Eddie he caught you slipping

[@gabe7773]

I camp at the lake frequently and sometimes have to air down. I finally got my dual viair setup installed, and it’s definitely a nice piece of mind having on board air.

[@cruzin404]

How many uga dugas does that impact have 😂

[@kylerichards4723]

Co2 tank is the ultimate way to go.

[@brad6192]

No story time today !!

[@henryavila5454]

Hey Eddie did you ever find out how to store the ding ding slides out or in???

[@EddieLife3500]

yes when storing, the slides should be stored out position not in

[@timothyjamesbeardsley4985]

Where can i get this exact setup you have on your truck? Part numbers, kit number? Please and thank you Eddie.

[@EddieLife3500]

contact hornblasters and tell them you want the eddies life kit

[@ivan50gt]

@@EddieLife3500 id like to mount my gauge and quick connect in the same spot. Is that a custom mounting plate?

[@realwettoe2515]

Can i get this for a 1500 silverado?

[@brendonpartridge7601]

I watch your channel alot every day and every night u are awesome KZbinr and say safe and healthy with your family Brendon Partridge 😀

[@carlohuerta129]

I don't want anymore weight on my truck so I have a small portable that I plug on the back of my bed works great

[@mannygutierrez314]

Yo kid... how much was that air setup. I think that's very important to have.... oh and little Eddie he's bad ass.. my wife loves him... lol

[@matthewmontalvo6594]

Hey thanks for the great idea I was wondering how I was going to mount my train horns and tank on my ram keep up the good work I like watching your videos.

[@ivan50gt]

Eddie. Love your channel. Was wondering what mount you used for the gauge and quick disconnect fitting. Was it a custom fabrication or something I can get off the net. Looking to do the same on my Ram in the next couple weeks. Thanks.

[@EddieLife3500]

No nothing special it’s just metal that I cut out, cleaned up and spray painted

[@justinhammett6607]

Hold the f up. Does Eddie actually put race fuel in his dirt bike?😂😂😂. And also. Where has story time been?

[@EddieLife3500]

yes i do and its coming back

[@moneynfast]

He is a handsome boy.

[@andylopez5491]

When are you going to glamis so you can do desert vlogs

[@jjames5928]

I couldn't handle the drain valve in the bottom of the tank exposed like that , I'd rip it off .. but I go offroad alot ,mud snow big rocks

[@jamestown6520]

Tint on windshield??

[@aaronfarrell6201]

Fox raceway is a great track.

[@derickponce-sanchez772]

any tank pressure loss overnight?

[@EddieLife3500]

no sir

[@lemoajammz]

Nice bro

[@mr.gtmsworld2494]

Can you show the hookup info?

[@EddieLife3500]

I did a 3 part video on the install

[@onecleanplatinum8434]

Does the tank have a valve to drain the water out?

[@EddieLife3500]

Yes

[@onecleanplatinum8434]

Thanks. I’m thinking of getting me this setup