I had a CineBot 25 not a CineLog. I got rid of it and custom built my own CineOn C20 V2. DJI O3, Airbot Fenix G4 STM32G4 FC AIO, Flywoo Nano Goku w/ Compass, Holybro Ripper 1404 3800KV.
@RaukFPV10 ай бұрын
What made you get rid of the cinebot? And what do you think of the the c20 in comparison? Thanks for watching.
@mad-builds Жыл бұрын
I have a problem with this drone that the throttle is not controlling well it goes from nothing all of a sudden to full throttle even if I don't even have it half open and then it stays in full open even if I close the throttle
@RaukFPV Жыл бұрын
Hey, that sounds strange. have you checked the stick input inside betaflgiht at check that they are correct? else you can check blackbox logs, to see if there is anything wrong. if you want help, feel free to reach out via discord, discord name: Raukael
@mad-builds Жыл бұрын
@@RaukFPV Ok thanks I'm go to check it thanks
@shubhampathak8220 Жыл бұрын
hey rauk, i have dji mini 3 pro and i want to enter in fpv world. so can you please suggest me which simulator is compatible for RC (with screen) that comes with mini3pro. I have m1 mac, please suggest me and guide me to fpv learning
@RaukFPV Жыл бұрын
Hey, first thans for watching!. Unfortunately the dji rc are not compatible with the fpv simulators. The Dji mini 3 pro does have an fpv mode if you have the goggles 2 and the motion controller 2, but its a very different experience. What id recommend, (i have a video in the works that i hope to get to at some point) is that you get a ps or xbox controller, while they are vastly different from normal fpv controllers they can work to get a sense if fpv is the right move for you. If you already know that fpv is for you id recommend getting a decent controller, and depending on what controller you can afford and prefer. here id recommend either of the radiomaster boxer, tx16s or the zorro. Alternately the dji controller 2 is also viable. if you are planning on going dji digital with the fpv drones. For the Simulator id recommend either Liftoff or uncrashed if you want to do freestyle, or Velocidrone if you plan on racing. If you just want to start out and want a free alternative you can get the fpv.skydive whcih is a pretty good simulator as well, but not as good as the paid options. Hope this helps, and feel free to ask any questions you might have.
@Snookado5 ай бұрын
i have a little problems with filters and strange moviments can u share ur PID config or CLI?
@RaukFPV5 ай бұрын
I can send you the pids and filter settings. But I would not recommend you just put them in, as our drones are properly not identical. If you send me a message on discord (Raukael) I can send them there.
@vk2icj Жыл бұрын
Thanks for the video. I agree with below that the music when you are talking isn't needed. My speakers are pretty good on my MacBook and it is hard to hear you properly. I wonder if they are putting the GPS on these for RID in the future???
@RaukFPV Жыл бұрын
Thanks for watching and the feedback as well. I'll be sure to try without music in the future :) As far as I'm aware you don't need RID when the drone is below 250g, and you would also need a module to transmit the location. Which would be quite annoying for a small drone like this where every gram matters. I can't tell the future, but I hope these small drones won't be subjugated to RID. Cheers!
@ShaneInseine Жыл бұрын
Is anyone else having a tough time hearing what Rauk FPV is saying because the music is too loud or is that just because I have really bad ears? I'm dying to know how this compares to my Cinelog 20 and the QAV Pro. I like this form factor but I feel like no one has perfected it yet. Doesn't this come with GPS? Many people say GPS isn't needed on a small whoop like this but I totally disagree. GPS is needed on all camera drones of any kind because they allow you some safety backup for flying over water and over areas where you may not be able to retrieve it in the event of a failsafe. I'd love to add GPS to my Cinelog20 but haven't figured out how to mount it.
@RaukFPV Жыл бұрын
Hey thanks for the feedback. I'll try to either not have music or at least lower it in the future. This is a diy C20 V2, if you buy it you can get it with gps. But I haven't found a use case for a gps on the small drones. Wouldn't use the small ones here for flying over water. For those i would use a 3.5" or larger. I would say i don't think you would gain much by changing from a cinelog20 or a qav to this. Thanks for watching!
@Octavius2040 Жыл бұрын
Hi Sir, what brand nd filter has this drone? Because i have geprc nd filter but did not fit in this model. Great video..! Thanks in advance.
@RaukFPV Жыл бұрын
Hey i am using the freewill filters but they didn't fit either. I had to just make a small cut with an exacto knife. Just just cut off the TPU where it didn't fit. It's a very small amount you have to cut off. Thanks for watching!
@BartManDude Жыл бұрын
@@RaukFPV The TPU guard is removable from the camera. I imagine it would fit fine then.
@Shokstix Жыл бұрын
hey Rauk have you done any tuning to this at all? Im using the stock gemfan 2023 props and its too fast for cinewhoop indoor flying. any input will be appreciated.
@Shokstix Жыл бұрын
stock betaflight was 4.3 i updated it to 4.4.2 and matched the old tune via sliders.
@Shokstix Жыл бұрын
im thinking of switching to the gemfan d51-5 like you have to give me more grip and a slower flying craft.
@RaukFPV Жыл бұрын
Hey yes, ive done a quite some tuning to it. i am not using stock tunes, and ive flashed bjuejay to my esc. It is still fast for indoor, but that mostly comes down to more throttle control as well as slower rates and the camera angle. another thing i could recommend is adding a throttle limit with scale just to bring down the speed.
@Shokstix Жыл бұрын
@@RaukFPV yep my rates are 300 pitch and roll 200 yaw. But I’ll drop it even more as this is very touchy. Would you be down to share your tune? Mine acts very jumpy in a tight corridor from the air haha
@RaukFPV Жыл бұрын
@@Shokstix sure, just typed the whole thing and youtube decided not to let me post. please write to my discord at Raukael