Is the Brand New Vevor Auto Heat Press A Must Have?? Or a Pass? Full Review & Demo 15x15 Heat Press

New Amazon Find. Is the Brand New Vevor Auto Heat Press A Must Have?? Is it worth it, or should you pass on this heat press. Full review and demo. Check it out! Let me know what you think?
Affiliate Links
Vevor Auto Heat Press currently with $50 off coupon on Amazon
amzn.to/3xwLr0E
amzn.to/4bB2Y5I
HTV Ront Auto Heat Press Unboxing Video • The New HTV Ront Auto ...
My Personal Lifestyle & Travel Channel
Subscribe & Follow for all the fun / @katrinab97210
Check out my new website for my products, coaching, my new ebook, digital downloads and more!
katrinasgracef...
All my SUBLIMATION Favs and must haves like Paper, blanks, machines and accessories all listed in my Amazon Store front.
Affiliate link : www.amazon.com...
Ricoma Embroidery Machines
ricoma.com/US/...
Ricoma Heat Presses
shop.ricoma.com?referral=katrina-bacon
Shop My Christian Clothing Brand at www.movengrace...
To purchase mighty Hoops an accessories Save on free Shipping when you call and use my Code Graceful at checkout!
Call 1-262-257-0930 ext. 1 for sales
www.hoopmaster.com
www.mightyhoop.com
Equipment:
Sony Mirrorless Camera : amzn.to/3Z9N65A
Godox V1=S Flash for Sony: amzn.to/3rcFumj
Savage Paper Backdrops: (many sizes and colors to choose from)amzn.to/488ENen
Heat TransferWarehouse Affiliate Link:
Siser Juliet, Heat Presses, sublimation Ovens, Blanks, HTV and More!!! https: www.heattransf...
HPN Signature series 16x20 Heat Press, Tee Square It Ruler and Logo Pocket GRID and more! (Look Under Heating Supplies to find it! It comes up!
shareasale.com...
I do earn a small commission when you shop my favorite business products!)

[@teondadunn1148]

Hi Katrina, the piece that melted is a small square foam pad (shipping pad) that you were to remove before heating. It’s easy to miss.

[@katrinasgracefulcreations3711]

@@teondadunn1148 didn’t seem like a pad….a shipping pad that small….weird. I have had so many presses and none of them had anything in between.

[@MsCree01]

Should have had a warning label to remind you to remove it

[@tinataylor9327]

FINALLY! Someone 8 trust that purchased this. I ordered it in May. Had the same issue as you with that shipping pad that they don’t have a pre-warning to remove it’s hidden in the back of the manual. Initially, when I pulled the drawer out and inspected the mat that piece of material wasn’t there it obviously was stuck to the upper platen due to electro static. And when I was testing open and closing and trying to get the pressure, it was heating up and I was smelling this plastic come to find out what it was so now I got plastic residue stuck to the top of it. A little bit is on the mat, but I can’t get it off the top. When I chatted with their support, they were like you gotta let it cool down and then scrape it off. My set up button doesn’t work like you show it and I even videoed and sent it to their support team showing the set up button doesn’t work. But it’s like two or three days before they respond.

[@tinataylor9327]

They only reference that on page 10 of the user manual. By then it’s too late if you haven’t seen it and already started testing the temps.

[@teecousins8101]

Cool, Rebox, and send it back for another one or refund 😮

[@kechawheeler7003]

Just got mine delivered today. This is so helpful. I am new to your channel as of yesterday and I love the content.

[@shengchen-cw2lj]

Thank you for sharing! I also used the iron at home to transfer the heat successfully, but also took a video record of the process, but the operation is too tired, there is a suitable machine has a certain sense

[@SMoore-ec7or]

I was so hoping with you that this press was going to fix the pressure issues! Thank you so much for this demo Katrina! We appreciate you!🥰

[@katrinasgracefulcreations3711]

@@SMoore-ec7or definitely not a lot of pressure in my opinion

[@silkeschumann7261]

It was a foam pad. I got lucky, because as soon as I saw it heat up, I switched the press off and to screw the handle on I flipped it to the side and thus it fell out. I only noticed it much later on the table. And I also learned that the pressure 5 is still on the low end. You need to raise the pad with solid cardboard or thick felt, so the design is really engrained into the fabric. You can likely use a spatula to remove the melted foam from the top plate.

[@katrinasgracefulcreations3711]

@@silkeschumann7261 thanks but this press is a No for me. Just don’t work like a press should

[@karencolon-rodriguez5935]

I like my HTV Ront. I use the ninja transfers, and it works great. I even ordered an additional pad for my HTV because you had mentioned pressure issues, but so far, it has been great.

[@katrinasgracefulcreations3711]

@@karencolon-rodriguez5935 yeah everyone says it works great if you get addicted additional padding. I never did. I just use my other heat presses.

[@jamtaylor1992]

That was crazy!!! You were a good sport about it because i would have ordered the return label that first night 😂

[@katrinasgracefulcreations3711]

@@jamtaylor1992 lol 😂 facts. I just wanted to see it through

[@TheCraftyPuertoRican]

I have an HTVRONT and love it! It's going to be 2 years with it and no issues.

[@katrinasgracefulcreations3711]

@@TheCraftyPuertoRican I like the HTV RONT better.

[@lorettastreet1192]

Is there a way to set amount of pressure on HTVRONT?

[@TheCraftyPuertoRican]

@lorettastreet1192 they have a pre-set option in the panel to choose the type of material you aee pressing.

[@lothararrigoni8134]

Hi Katrina, I have the HTV Ront and had similar problems at the beginning. Until I realized that my plotter foils for the Cameo prefer to be peeled off cold. It is similar with DTF. At least 60% of them prefer to be cold-stripped. With plotter films from Sef, or Poly-Tape, for my large plotter from Vevor, there is no problem with cold stripping. Many thanks for your great and helpful videos. Best regards from Germany

[@katrinasgracefulcreations3711]

@@lothararrigoni8134 hose transfers were specifically hot peels. I don’t buy cold peels anymore. It just didn’t have enough pressure. I press them all the time with my other heat presses. Not sure what happened with the vinyl

[@DLADY20879]

I think they put your pad in wrong. I believe the sticky stuff was suppose to be on the bottom of the pad to help it stay in place. I have faith that you will figure it out. Thanks for keeping it real with us. Stay bless my sister

[@katrinasgracefulcreations3711]

@@DLADY20879 really. Never seen one stuck down. All my pads come out. Whatever it was it messed up the press smh

[@judyromano2229]

@@katrinasgracefulcreations3711 I agree, they shouldn't be pressed down. And the fact that it slides, that would drive me crazy.

[@jeallservice]

It works fine for me, but i have a little more time when pressure than my manual press. Love it

[@katrinasgracefulcreations3711]

@@jeallservice awesome

[@violafloyd6477]

Thanks for reviewing this product, I have had an awful experience with Vevor, Customer service was below zero. I save my correspondence from them to use as a reminder to never buy from them again

[@judyromano2229]

I had high hopes for this one. I have the Vevor swing away, it works great. I haven't used it since I got my HTVRont. I ordered it during production. It works great. I use the pad from the Vevor when I need more pressure or even a towel will work. I've done vinyl, HTV, DTV and sublimation and have never lost any blanks. I even do large hoodies on mine. This one looks like it has less clearance. I too, wouldn't like the no start\stop button. My next heat press will be a 20 or 24 in one. I'll be watching for the side by side comparison. Great job on the video.

[@katrinasgracefulcreations3711]

@@judyromano2229 yeah it did seem like less clearance but I will put them side by side for an awesome full review

[@judyromano2229]

@@katrinasgracefulcreations3711 I just ordered the new HTVRont manual press that's coming out. I have a swing away but its small. I like the 15x15 but would love to one day have the 16x20 or 24. I'll be looking for your comparison video

[@katrinasgracefulcreations3711]

@@judyromano2229 you ordered which one? HTV Ront has a new swing away. Their auto press been out for a while.

[@kryptonikdoses]

The first heat press I bought was from Vevor and after 3 presses the fuses blew. It was “expeditiously “ returned 😅 and I vowed to never purchase a Vevor product again. It’s a hard no for me. I have an HTVRont but mostly use my BetterSub.

[@jo-anndunn515]

Thanks for the video, I was excited it looks very nice. But WOW not users friendly! I will stick to my HPN signature for big jobs and HTV ront for small. Love your vibe and honesty

[@katrinasgracefulcreations3711]

@@jo-anndunn515 thank you so much and yeah you’re covered with a big and small heat press already.

[@thedumasgroupllc]

Thank you so much for demoing this heat press, Katrina. I love my HTV Ront and I didn't like that Vevor was trying to mimic it but looks like it's nowhere close. 😂 Sorry I had to laugh during your demo. Headless bear.😢

[@katrinasgracefulcreations3711]

I know it murdered my bear. Lol😂

[@MsCree01]

However Vevor does have excellent customer service. They replaced my cricut like auto press with a different model when it stopped working after one use

[@Cee_Cee8]

great honest review

[@nahnisjourney1406]

VERY NICE!!! VEVOR has entered the auto heat press game!!! It sounds like they have addressed the pressure issues that other auto heat presses are having. We shall see. I have the white 15x15 VEVOR clam shell heat press, and I love it.

[@katrinasgracefulcreations3711]

The pressure issues isn’t wasn’t fixed.

[@SimplyKies]

Hey Katrina! 😮Your experience is enough for me… I’d rather the htvront brand

[@wandaivetterivera3887]

You should try the press doing cool peel…

[@michellehefner9620]

This happened to me also..apparently they packed it with the product as part of the shipping materials? Makes no sense.

[@tinataylor9327]

Agreed. It makes absolutely no sense to have that as shipping/packing material. It serves no purpose for protection. Just the opposite. I just emailed their support team again because my setup button doesn't work. I asked to return for something else.

[@tanyakerr6392]

Hey I just got the Brig brig sun auto heat press and I did DTF with it, easy peasy. You set the pressures for that one, it works great. Also, clearance

[@katrinasgracefulcreations3711]

@@tanyakerr6392 brig brig sun? I never heard of that. But I have much better heat presses. I have a Hotronix and transpro plus

[@JCOMCreations]

After the Transpro and/or the Hotronix, nothing else on the lower end will compare. I wanted the Transpro until I saw the Hotronix. I love my Hotronix. Good luck with this press.

[@tanyakerr6392]

This machine i mentioned cannot be compared to hotronix or transpro, much better machines. I am comparing it to the machine shown in this video and htvront

[@Crafts-and-cocktails]

Try that stuff used for irons to clean it off. Have you heard about the one from xtool? Can wait to see the new one from HTVRont that Stacy mentioned.

[@katrinasgracefulcreations3711]

@@Crafts-and-cocktails yeah I can’t wait to see it

[@candya9971]

Its always so interesting to me that one bad review how many people won't buy it lol - that pad was supposed to be removed its a packing thing when you pull out to put the handle on you can see it to remove it - so of course the teflon will keep sticking because its on the top plate - I had to play around with temps and settings and save my favorite in the machine =) I had one shirt I put a piece of cardboard inside the shirt to add more pressure but it was an iffy shirt aka crappy lol I was playing =) There will always be pros and cons to all machines - one more thing - my tray slides out after the 3 beeps on its own I noticed you had to pull yours when finished - this is meant to walk away and it will stop and slide out when done in case you did step away - very interesting review LOL =) I didn't have nearly as many issues - BUT this was my very first heat press besides the cricut easy press so I have nothing else to compare it too =) So far I love mine =) Time will tell =) Thank you for your time and review =)

[@katrinasgracefulcreations3711]

I have many heat presses so compared to the rest this is by far the worse. I’m going to try it again. Thanks for watching

[@tinataylor9327]

Trust me, everything that she has demonstrated is true because I’ve had the same issues. I haven’t even been able to use it to press a project because 1) that plastic white pad melted to the top of the platen and I have no way to scrape it off. I even tried to scrape it while it was still warm. 2) The instruction manual is horrible if it wasn’t for the fact that she demonstrated using it most people would be confused by the manual. My set up button does not work at all and I have to contact them to return it even though it’s past 30 days.

[@jenniferdonelson1374]

Katarina I didn't have that problem I wish I could help you

[@katrinasgracefulcreations3711]

@@jenniferdonelson1374 yeah not sure what happened. It’s all good

[@jenniferdonelson1374]

Send it back, because I know for a fact that you pay for vinyl. I am sorry. I have their other automatic heat press and love it, and their 15x15 white one.

[@lobexkaraoke5691]

Thank you for this review.

[@JCOMCreations]

I really like your design. Thanks for the video. Personally, I don’t think the design, HTV Ront nor this one, are good designs for t-shirts.

[@lynnebizlyne436]

Oh wow! That was not good. You gave it a fair shot and it didn’t perform well. Thank you for sharing. I love my swing away and will stay with it. It has Manual increase pressure available and it’s appreciated.

[@katrinasgracefulcreations3711]

@@lynnebizlyne436 I love swing aways. I’ll stick with my Hotronix

[@donnagray31]

My Vevor heat press only worked once and now I cannot get the top platform to rise up. Any suggestions on how to fix this problem. I have contacted Vevor but I have had no luck in getting any help

[@laurielasley6568]

Great information thanks

[@stevent5571]

everyone says to get a mat to make machine do more pressure. I just bought the HTV RONT AUTO PRESS

[@katrinasgracefulcreations3711]

That still didn’t work. New video coming out today showing them both side by side.

[@nanettefantauzzi1881]

Well….after that….thats a no for me. 😂 BUT as a fellow Brooklynite….I love that shirt!

[@TeresaWilliams-xn5gx]

It is the mat for me that moves (changed my mind a little) : would of been nice had they done it differentlyThank you Katrina....

[@MsCree01]

Love that NYC design. If you made that can you do a NOLA New Orleans one

[@donnafisher1278]

You get what you pay for Sorry for those wasted materials Appreciate your honest opinion

[@catbenjamin5838]

Thank you.

[@TeresaWilliams-xn5gx]

Hi Katrina that piece was there not melted you missed it while working you were to remove it in the video you could see it before you pressed it :)

[@nahnisjourney1406]

Hi, Katrina. So you lint roll the garment before pressing the transfer to it? It might need to press for longer. I hope it gets figured out for you.

[@katrinasgracefulcreations3711]

@@nahnisjourney1406 I press those transfers all the time. They literally only need 15 seconds. I have showed them many times on my channel even my son has pressed them. They don’t need more time. That’s how TKO transfers are. That press just can’t handle them.

[@lorettastreet1192]

Your design was nice Hope your son likes it.

[@Kiki.D0516]

Do you have a tutorial on how to make the Brooklyn t-shirt?

[@dawndyer7661]

I think it didn’t press well because of the paper that melted onto the top platen

[@patresaplus3274]

Great video, i think you got a lemon, it has alot of issues, thank you for your review that heat press gave me so much anxiety and i wasnt even there 😅

[@katrinasgracefulcreations3711]

@@patresaplus3274 I never had that many issues with a heat press for real.

[@thewardfamily3640]

Woah sorry about that its not working as it sure

[@darlahpotechin1668]

why can’t you use a pillow for more pressure? My htvront blows circuits so it cost me an electrician to do a dedicated line. My vevor original I have to use pillows for more pressure and my Cricut on arrival is not working and I have sent 8 videos and no solution. I find my 16x20 slide out manual pressure the best. More size and you do figure out the pressure.

[@katrinasgracefulcreations3711]

@@darlahpotechin1668 you can add a pillow of course but I was testing the heat press as is and there isn’t a lot of clearance. I wanted to test the pressure with just the heat press

[@darlahpotechin1668]

@@katrinasgracefulcreations3711 it makes sense. I almost bought yet another auto heat press but didn’t after this lol

[@thakiddsurface]

DOPE CHICA 💯💯💯

[@cathysiddall7355]

u tried katrina send back for refund.vevor may have some issues work out. thanks for video

[@kimtrotter6888]

Great Video

[@jessiegibson9023]

Good video thanks ❤

[@la-vieborde2496]

Based on your results I would spend for that

[@GABEAUTY73]

Also I had to put more padding for the pressure

[@katrinasgracefulcreations3711]

@@GABEAUTY73 that’s what people said about the HTV Ront one. I just don’t use it if it requires heavy pressure. Not worth it and there is no space

[@gailm8462]

No to the heat press but YESSS to your design!!🩷💚

[@katrinasgracefulcreations3711]

@@gailm8462 thank you

[@mychalbrown9704]

Return it!!!!

[@chaep]

🤣 u left the sticker on

[@MsCree01]

They failed at their cricut version too

[@monarnyc]

Thanks so very much for taking the time to do this. I dont have the strength to open and close a heat press due to shoulder problems. Will not be purchasing this.

[@katrinasgracefulcreations3711]

@@monarnyc I will be doing more testing. Hope your shoulder feels better

[@janekirk3912]

After watching the demo I think that machine is a total bust! Thanks for the demo though! As the Hebron, I actually like mine.

[@LanceMcGrew]

31:24 Wouldn't you compare VEVOR price to the HTVRONT $255.99 rather than a $1000 press?

[@katrinasgracefulcreations3711]

@@LanceMcGrew the point I made was because you get what you pay for compared to a more expensive heat press that works. Everyone knows this is pretty much exactly like the HtV Ront.

[@stacyjones200]

That one didn't seem to work out well. Htv Ront has a new one coming out. It's a swing away.

[@katrinasgracefulcreations3711]

@@stacyjones200 oooooh that will be nice I’m sure

[@didlet1329]

Thanks for the demo….where can I get the Brooklyn SVG? I love the shirt.

[@katrinasgracefulcreations3711]

@@didlet1329 I stated in the video. Creative fabrica. Forgot to link it. I will try to remember to link it tomorrow

[@didlet1329]

⁠@@katrinasgracefulcreations3711thank you. I looked at the Brooklyn designs and couldn't find it.

[@CheBesDesignBox]

I think...send it back...just buy a silicone pad for the HTVRONT...VEVOR do better.

[@GABEAUTY73]

I have to tape my image or vinyl down because it does move around

[@katrinasgracefulcreations3711]

@@GABEAUTY73 crazy

[@danip777]

Sorry, but vevor is absolutly not good. I wouldn't never buy🤷‍♂️.

[@anthonyjackson7016]

I have not ordered mine yet ...tomorrow morning I will be calling them for a refund🤣....What's going on Black Queen.

[@katrinasgracefulcreations3711]

@@anthonyjackson7016 you might have better luck

[@marklola12]

All these auto press machines are crap thats why HTVRONT have brought out a manual one lol

[@reddtillman1076]

I would have just repressed it

[@thewardfamily3640]

Good Night

[@THELOBETVSHOW]

Maybe u should have did it for 30 seconds

[@ArieHugz]

Nah this heat press is definitely not it.

[@PrinceSaladin]

beautiful machine

[@katrinasgracefulcreations3711]

@@PrinceSaladin it is beautiful

[@thewardfamily3640]

😅

[@williambermudez204]

Not a fan of the HTVRont and wouldn’t be a fan of this one. The HTV Ront was a waste of money for me

[@katrinasgracefulcreations3711]

@@williambermudez204 if you are use or like the bigger presses then these are not for you. They are not but not a work horse

[@williambermudez204]

@@katrinasgracefulcreations3711 oh I found that out the hard way. I purchased the HTV Ront when it first came out and there was all the hype about it and really no research on KZbin about it. I only use it for small sublimation jobs like coasters or other hard substrates .otherwise I use it as a little table when pulling out the tray to lay my transfers on😂😂😂.

[@jenniferdonelson1374]

I have one, I but alot from Vevor through Vevor

[@ceciliamack1195]

Not worth the money 😮

[@corrier5954]

For being an auto press does not seem to be that much auto to it.

[@katrinasgracefulcreations3711]

@@corrier5954 tell me about it. The HTV Ront is more automatic

[@petrag.4092]

👍🙏❤️🇺🇸

[@lplp8529]

I’ve not much success with any VEVOR products.

[@katrinasgracefulcreations3711]

@@lplp8529 some people love them. This was my first vevor press

[@thewardfamily3640]

Nah not holding up

[@katrinasgracefulcreations3711]

@@thewardfamily3640 nope 👎🏽

[@michellegill1278]

Vevor products seem like a waste of time purchase.

[@katrinasgracefulcreations3711]

Some people love them

[@niecytell9429]

I don't like this heat press

[@katrinasgracefulcreations3711]

@@niecytell9429 yeah it’s a No for me!