Is The Gyro-Cut Better Than An X-Acto Knife?? Speed test and first impressions

[@serenityjewel]

I'm so shocked about the xacto knife. My experience is the exact opposite. My cuts and timing are great with the xacto knife and suck with scissors. I think that's because I always use an xacto knife so I'm good at using it; whereas you primarily use scissors so that's why you did better with those. It's like all tools. The one you use the most are the ones you're going to be great at. I am impressed that the new tool was almost as good as your everyday tool so I'll definitely be looking into it. Thanks for the video.

[@nanetten6238]

It's a testimony to your charisma that you could present this in such an exciting and interesting way. I couldn't wait until the end to find out the winners! Keep doing what you do !

[@eastofhoney]

Thank you so much! That means so much to hear :)

[@maryperez1235]

It is now Sept. 2023. Wondering if you did use this tool much. I have a hand/ dexterity issue and it looked helpful but yes...gimmicky. TFS 💥Hope all is well. Your artwork and personality are full of joy. Best wishes from Illinois 🌽

[@lisablackwelder7079]

@nanerren6238 Hi. I'm with you, she is a treasure in presentation. And, she was pretty efficient in using the tool, just out of the package. I'm seriously thinking about a purchase, I cut out of magazines alot, looks like this tool would be a faster cut for me. Just want to compliment you, your comment was spot on. Thanks. Best Wishes from Dallas, Texas USA❤

[@chrisw2626]

I have one of these and decided the lack of precision is because you can’t see the exact point where you’re cutting as the sticking out bit that holds the blade obscures your view.

[@suzyallen1726]

I noticed that when rosie was cutting. I couldn't see the blade

[@Heisenberger2005]

Hey are the blades of these cutters available?? Or are they use and throw unlike X-acto cutter

[@craftyproducts3009]

Hi, This is Noel, Managing Director at Crafty Products Ltd in the UK. We are the designers and manufacturers of the Gyro-Cut and Gyro-Cut PRO tools and accessories. Thanks for a great comparison blog of our t

[@rumtum99]

This has been the best review this tool will ever get

[@flyingrabbitears7962]

Back in the late 1960s, I watched my sister cutting a stencil for a poster to be silkscreened. She used one of the standard X-Acto blades (X-Acto calls it a #15), the one that is a little off the axis of the handle, which when used with the blade not tightened into the handle, swiveled just like this as she drew with it.

[@debmc2291]

That's interesting! I'm going to try that!

[@leslieharris9088]

I couldn't find a #15 blade on X-Acto website

[@papabear2515]

Appreciate your testing and sharing of your impressions!

[@francesdenike7526]

Love the circles too. I enjoy abstract shapes.

[@marmaz57]

Thanks so much for this comparison, Rosie! I learn so much form you!

[@carolheinze6901]

So glad to did this video! Thank you❤️

[@kimbaxley7595]

It was very fun to watch someone test all of these. In my experience I find the xacto knife to be the fastest and easiest but they do take practice. Keep in mind we have been using scissors since being old enough to do it. The swivel knives have been around a long time. Originally there were exact knife type swivel knives and then lots in between then and now. I just never wanted to learn to use the swivel knife. I think they will be the fastest but will require the most practice. Just my 2 cents.

[@joannelafrancejolaf]

Hello Rosie. I’ve been looking at this tool for a while now. Glad to hear your thoughts about it. I really love those circles you did at the beginning. What I love about them is the imperfection.

[@eastofhoney]

Yeah, those circles turned out surprisingly well!

[@firebutterfly]

I decided I wanted one for easier cutting. Really glad I found your video. Helped me see how much practice I'll need to get the smooth, clean cuts I've seen long time users getting with the Gyro-Cut. New subscriber :).

[@drawstraw4483]

I wanted this for R/c car shell painting. First you wash the inside, and then double coat liquid mask the inside of the shell, and then draw your desired designs on the outside of the shell, and peel, and paint layer by layer the inside! This prevents your paint from scraping off when you wreck your R/C cars, buggies, truggies, and touring cars. and thought if this thing works anything like the commercial 😮I could get down right in it for some of the cleanest paint jobs anyone has ever seen😁

[@sandradowkes481]

I'm so glad I ran across this video; I bought one of these from AliExpress (came with three blades) and have hated it, but after watching this I feel that I need to experiment with it and not just give up without giving it a better chance. Thanks, Rosie!

[@francesdenike7526]

I have thought about buying the gyro tool and my research resulted in too much negativity. After your testing and testimonial I will look into buying it. Thanks. Practice will prevail.

[@KarindeBeer]

Great experiment... i was secretly hoping the gyro cutter would win because i love it. Yes, it takes a few cuts to get used to it, but for creating nice round or curvy lines in a flash it is the best!

[@Gothlite-i1l]

The thing I worry about is where the replacement blades are sold and how much they are. Plus that packaging is very overblown but at least it can be used as something else. This comparison was neat!

[@eastofhoney]

It would have been great if that extra pocket had some extra blades in it!

[@invictusbp1prop143]

Lack of precision in cutting with blades is just from familiarity. You’ve been using scissors since kindergarten. You’re just accustomed to using them, they aren’t inherently any more precise. And using a swiveling blade actually has advantages over scissors, especially when cutting small intricate shapes with tight inside corners. I use a traditional saddle type swivel knife for leather tooling. When there are very small, tight cuts, I have two knives with the same little swivel blades that that contraption has, they just aren’t offset like that. Ones like a writing pen with a retractable little swivel blade and the other is a finger wrap design. I think I may get one of those just because the offset seems like it would make it easier to see your work. Thanks!

[@suerabe5708]

I recently purchased a Gyro, hoping it would help me with my cutting shapes. I have only tested it briefly and I like it. I am a one-handed person so I always looking for tools that may improve my skills. If you have any suggestions, I’m open I them. I absolutely love your videos.

[@KurenaiNoAi]

I love my gyrocut, but I still reach for my scissors. I totally agree on xacto knife being uncomfortable, but I found an ergonomic one, it's called the Fiskars Fingertip Precision/Detail Knife. It doesn't rotate like the gyro, but it's so much easier to use!

[@eastofhoney]

Yes, sounds like it could definitely work for you. I would just say lots of practice!

[@TheNerdJournals]

Oh well now I am excited to try one of those out!

[@beautyandetc]

My husband and I lover this video so much 😊💖

[@gregwilliams7354]

Well done video. I am not a crafter, but a modeler. Knives are essential in everything I do. However, the Xacto fails to satisfy. I often use a single edge razor blade and have recently begun using scalpel knives and holder. That is uncomfortable to hold for sure. Scissors have always been a struggle for me. I am curious enough about this tool to pick one up, but due to my strange habits, likely won't be a go to tool for me.

[@lovelydaywithholly]

Thank you for this video Rosie!! I've seen this gyro blade on social media and have been curious about it!

[@eastofhoney]

I was too so I had to try it out!

[@Nemely10]

I just got one! Excited to give it a try.

[@robindonnelly]

I have been wanting this. My hands hurt sometimes so I think this will help. Thanks so much for the fun challenge test, Rosie!

[@fibergoddess1]

I have arthritis in my hands and cutting with scissors can be painful when doing marathon ephemera cutting from paper pads. I’m moving the gyro from my Amazon list to my cart. Thanks for doing this test.

[@pamelaconkin1361]

Thanks for reviewing this. I have been wondering how well it works

[@annagray6491]

I have tried this tool, several times! I just could get along with it. First one I had I gave away, second one got thrown away and the third on I gifted to a charity shop! Glad you liked it!

[@Alx77us]

Why try ( practice ) several times when you could try ( practice ) once multiple times then. See if you have the skills to use this thing. I think you are one of those stupid people that wasted money just because you don't know 💩 😂

[@susancook4406]

Thanks for the great info on the gyro cut !

[@sandrahulbert150]

Have you tried the Fiskars fingertip precision knife? I have one coming and can't wait to test it out!

[@lyllydd]

I wonder if Xacto's swivel blade would fit this tool? It seems like just a swivel knife set into a Speedball oblique pen holder.

[@KimberlyLetsGo]

You're really skilled with the scissors because you've been using them since kindergarten. The Gyro is brand new and with a lot of practice, you might find you are super happy with it.

[@Turtle_6262]

not on topic of the video at all, but this is so crazy, I started watching and instantly felt like I recognized you. Turns out I went to school with your doppelganger!!!!!!

[@orion7741]

in my opinion, the X-acto 360 was the pinnacle, and honestly the best all purpose cutting craft knife there is. I have tried other swivel type knives and none of them measure up to the original X-acto 360 knife.

[@bernie1844]

The gyro cut is a cutting tool with safety in mind. It works best on a hard surface, like acrylic cutting plates, a sheet of copper works well and will not dull the blade:) self healing mats are way too soft. And one more thing please do not cut on any glass! stay safe and happy crafting;)

[@thepain321]

What’s wrong with glass? I cut on a heavy grain bamboo cutting board. Or a polished dark green marble slab. Straight cuts versus rounded precision.

[@julesvis]

I bought one of those gyros when they first came out. I found it didn't stay sharp for long . The people demonstrating it on a UK craft channel used a sticky cutting mat to hold the paper down. I found that this glued up the blade too .

[@maramakesjournals2319]

EXCELLENT VIDEO. Thank you. I put the Gyro on my Christmas list before I saw your video. I watched somebody cut out images with a border all around. That seemed to work well for my purposes. Worth a try if🎅🏼brings it down the chimney.

[@raitonvedan2527]

Hey there. You said in the very beginning of your video that it doesn’t go through thick paper/material. This is because there are 3 different knives for the gyro cut pro. You have the first size knive, which is for thin paper, but there are size 2 and 3 for thicker and even thicker paper and other materials. Please have a go with the other knives. Much appreciated your video comparisons.

[@donnaburgess8726]

At least you received an instruction booklet. I received my tool twisted into a strip of bubble wrap and shoved into a mailer. Nothing else🤷‍♀️ Glad I found your video. 🙃

[@MommaBird52]

How long have you been cutting out with scissors vs gyrocut? Experience pays a big part in preference.

[@suzyallen1726]

I have a real hard time with exacto around curves. Scissors are better. But my hand shakes so neither is precise. I might have to try this thing. Is it expensive?

[@recoveringsoul755]

And wow, you are GOOD with an Xacto knife!!

[@Indie-valie]

I have such shakey hands that xacto knives are very difficult. I’m pretty precise with scissors, but sometimes it bends the edges of curved/corner things. So this is exciting to see!!!

[@PhoebesWorldProductions]

I agree, strange packaging. I didn't even know the gyro one existed, until this video. ;) it does look like something I might like to try.

[@eastofhoney]

Apparently its been around for a few years, but I just found out about it a couple weeks ago!

[@PhoebesWorldProductions]

Oh wow!

[@shirinkamisami4487]

Thank you very match . I wanted to buy it, I didn't know if it was good or not. Does the blade of this cutter slow down? This made my mind busy. I think it cuts curved and round lines easily, but the rest of it works like a regular cutter. But the design of this cutter blocks the view i guess . Maybe we can't see the lines well. I have no experience using it yet

[@marionmathews9852]

Great experiment!

[@missyb.623]

Thanks for this review

[@WouterZtube]

For your exacto knife there are also curved blades that allow better control for curves.

[@recoveringsoul755]

Si the blade swivels then! I had something that swivelled, has replacement blades, but needed a template with slits to put the blade in and guide it, wasn't free handed like this. Blade came out, and I can't seem to get it back in there. Thus looks cool, would be great for those interior shapes like between tree branches, insides if letters like Q and D and R, inside window frames. Better than scissors for those.

[@samanthaLove32]

I've just subscribed. On Reddit your the go to from many Collagers - I'm re-entering the arts. I'm shumbling along wondering where i am being led to. I found it. 😊 all i need to know today is, what scissors are you using? ❤

[@samanthaLove32]

As well the reason that I've gone this is for me, is you! ❤ ex. art teacher here. As well ex. Involved in the art world of exhibitions - selling etc. I'm so glad I found your little book post on Instagram or was it TikTok. It clinched it. X Thank you so much from your new friend from New Zealand ❤

[@MiguelRodriguez2010]

Now I have to 3D print this!

[@sashafortis]

replacement blades are available on ebay for about $1.20 each, in various angles if cut.

[@dragonflygrandma]

loved the video!

[@nateb4543]

If there aren't replacement blades, can it be sharpened?

[@lisablackwelder7079]

Hi. I just subscribed! I love the video, thanks.

[@PursuingHeaven]

I have wanted to know if these would make fussy cutting easier, especially for coloring pages you want to do, then cut out and put in a mixed media journal...look like it would be easier than fussy cutting...

[@WendyInMD]

I bought this tool 3 years ago, and it’s still in the unopened package (which isn’t as interesting as your packaging 😂). I think I got it with the idea of cutting out my own printed stickers. Fussy-cutting with scissors always seems like it would take so much work and patience. I have so many craft supplies that are collecting dust. You’re inspiring me to start using them again!

[@jaheedi]

Would these work for clear plastic stencils?

[@cyndybeller1306]

A replacement blade on Amazon is $8 so it all depends on high long a blade last.

[@eastofhoney]

Woof, that is a little expensive!

[@paulasimmons9938]

Check Amazon again. They had pkgs.

[@vernonzehr]

Good grief, I just thought of trying to make a holder for traditional X-Acto blades that can swivel. Dang, I need a 3D printer. Also, there's nothing worse than trying to cut with a dull blade. I wonder how long the blade lasts, how much replacements cost, or if they can be sharpened. I have been sharpening x-acto blades with a super fine sanding file I bought recently and it doesn't make them like new but it does give them extra life.

[@lindaliebermann2519]

You only cut with paper. Does it cut card stock for you. I bought one and threw it away because cardstock is mainly what I cut

[@teresahiggs4896]

There is an Exacto cutter that has a swiveling blade ( swivels 360 degrees list like this cutter) I use this a lot when I need to fussy cut somerhing. I struggle using scissors to fussy cut because I have fibromyalgia and arthritis in my hands.

[@fitzt70]

I just bought this for my 10 yr old. Definitely going to return it. The blade did not cut well at all. As it is stainless steel it will be tough to sharpen. Also the swivel head is sticky.

[@CL-we8tn]

I need both

[@bergfpv6486]

Seems to me that the bend in the handle is unnecessary and maybe even a flaw. A straight handle with just the blade holder turning might be more maneuverable. They may have over-engineered it a tad.

[@annettesharma9536]

I bought the gyro cutter and it came with 3 replacement knife tips as well as several other differently shaped knife tips. Also it was not packaged as fancy as yours, I believe I got the better deal, sorry.

[@teresahiggs4896]

Yeah me too. I bought my gyro cutter from Aliexpress . And I paid less than the price on Amazon, and like you, I recieved several replacement blades.

[@bettelovelace4456]

I have one but haven’t tried it yet🤔I guess I’m gonna have to do that now👏💜TFS💜

[@girlyjean2558]

That was interesting. I have never heard of it.

[@scorinth]

Whatever else is going on, I _love_ the weird packaging. I could see using that for storing other things instead of just going in the trash. I hope that was an intentional decision.

[@missrosethiessen9487]

I would love to try this. Where did you get it?

[@eastofhoney]

I purchased mine on Amazon, but have seen it on other craft sites!

[@missrosethiessen9487]

Thanks

[@teresacollins100]

I can’t figure out how to replace the blade 😢

[@marenerk5091]

the Gyro you can use "the rest" as a templete for backrounds i think.

[@scaletownmodels]

I'm not sure what they patented or think they invented there. These are called a drag knife or tangential knife and have been around for a very long time. You'll find those blades in just about every vinyl cutter on the market. You might be able to find a replacement blade that fits that from vinyl cutters, if you can't find one anywhere else. You'll find bigger ones on cnc machines where the blade rotation is also under computer control so it is always at the perfect angle. Some can cut up to 1/4" material.

[@maryr7800]

Someone on another video said you only use the tip on the Gyro Knife to cut, which makes sense to me.

[@jeanadamsick9854]

THANKS!!!!

[@scottworsley20]

ah, the variety of classification for the genius of 'books'

[@superfunkymunkyman69]

It's supposed to come with different size blades for different thickness

[@shawnatwin]

Thank you

[@maramakesjournals2319]

And, yes, the Cutter Bee is excellent for fussy cutting. I ♥️ my 🐝. IMO: use the right scissors for the job! One size scissors does NOT fit all. Beware the scissors monitor! She will get ya!

[@PurpleKangaroo4]

it is the same idea as the type of knife in a plotter machine, just handheld and manually controlled

[@marilynbook4211]

It sounds interesting but if it can't cut through heavier paper like cardstock I think I will stick to my scalpel.

[@221b-Maker-Street]

"Now unavailable". I hate this with Amazon Marketplace these days. Everything is so transient, sellers are anonymous, across the other wide of the world and disappear in a trice, and onto the next thing. I mourn the demise of proper shopping, all to save the odd quid here and there... Nothing against you, Rosie. Your video was excellent as always. More a comment on The World Generally...

[@BeachPeach2010]

I wonder if this would work on leather. 🤔

[@AtlantaTerry]

I wish you had mentioned the price you paid and had looked into replacement blades: yes or no. Update: there are 3 different blades made for this cutter: 15*, 30* and 45* angle blades. Amazon carries this cutter. Individually and 3 handles with different colors loaded with 1 of each blade angle.

[@silkeschumann7261]

I don't have a gxro cut. I am definitely more precise with a scalpel than with scissors. And the scalpel wins in the inside shape.

[@karlmcaidey1084]

Satisfying show

[@cheyennes7681]

I know this video is a year old but I noticed a lot of people cut away from themselves with these and that seems to work a bit better. Maybe because they can see where they are going?

[@BibsyP]

I bought one and regreted it very soon after trying it out a few times.

[@eastofhoney]

It's definitely a little weird and hard to get a hang of. It might not be for everyone!

[@Mavrik9000]

The tests weren't quite fair because the papper was rotated with the X-Acto and scissors but not the Gyro-Cut.

[@keener57]

The idea of the gyro-cutter is that you do not need to rotate. kzbin.info/www/bejne/i17RpIKnf6t6gsU

[@Mavrik9000]

@@keener57 That might be their main marketing strategy, but its real power is in making smooth curves. It is always easier to make precision cuts with certain specific directional movements of your fingers, hands, and arms. Also, visibility becomes an issue when you are cutting parts of a shape that are farthest away, or in a direction that is hidden by your hand.

[@scottworsley20]

Those look like boundary between New York and Pennsylvania.

[@MoniqueAO888]

Interesting test...it seems, that in usa fuzzy-cutting is quite popular and also well done !!! There is also the "swivel-finger-blade" from Fiscars, which might be easier to use for some people... 🙂

[@scottworsley20]

right, gotta' compare to standard tools

[@brenda1144]

I bought one and couldn’t do anything with it

[@eastofhoney]

Interesting! It's totally weird to use at first. I would give it another go! But it also might not be the right tool for everyone

[@luvz2reed]

Someone needs to make clear scissors. I can't always see where I'm cutting because there's a giant metal sword in the way.

[@DrummerGrrrl]

Your Xacto knife blade might need to be changed more often, if you're having so much trouble cutting with precision AND your fingers hurt. When you have a fresh blade in your knife, cutting should be smooooooth. I have used Xacto knives since the late seventies and they just keep getting better.

[@scottworsley20]

Like, 'BOOKS' you know. the language of books is so hard to illustrate with such a jump as whatever hurldes come with being a book maker who is studying the art of books.

[@katielove9932]

I'm not totally convinced to buy one. Especially, because I think it's not ready to be that convenient.It's probably designed to be more like a pen than a straight tool like the Xacto knife. I didn't see it being any better other than that. And even at that design, you had trouble with it.

[@scottworsley20]

Super Cool. I am an amatuer materials scientites

[@scottworsley20]

Sont' worry, this is just a demonstration.

[@the-bu3lb]

It says it can cut leather so it if can’t cut carboard then it’s bullshit